A study on the exergetic analysis of continuous textile dryers

被引：0
|
作者：
Cay, Ahmet [1 ]
Tarakcioglu, Isik [1 ]
Hepbasli, Arif [2 ]
机构：
[1] Ege Univ, Fac Engn, Dept Text Engn, TR-35100 Izmir, Turkey
[2] Ege Univ, Fac Engn, Dept Mech Engn, TR-35100 Izmir, Turkey
来源：
INTERNATIONAL JOURNAL OF EXERGY | 2009年 / 6卷 / 03期
关键词：
stenter; textile dryer; drying; exergy analysis; DRYING PROCESS;
D O I：
暂无
中图分类号：
O414.1 [热力学];
学科分类号：
摘要：
This study deals with the exergetic analyses of the continuous textile dryers consisting of a stenter and a conveyor belt dryer. The exergy destructions in each of the components of the overall system are determined for average values of experimentally measured parameters. Exergy efficiencies of the system components are calculated to assess their performance. The effects of varying exhaust air humidity ratio and dead state temperature are also investigated. The total exergy efficiency values for the stenter and conveyor belt dryer are found to be 13.7% and 14.3% for the exhaust air humidity ratio of 0.1 kg(air)/kg(water), respectively.
引用
收藏
页码：422 / 439
页数：18
相关论文
共 50 条
  • [21] Curing peanuts using continuous flow dryers
    Butts, CL
    Sanders, TH
    APPLIED ENGINEERING IN AGRICULTURE, 2002, 18 (01) : 77 - 83
  • [22] EFFECTIVE SAVINGS THROUGH HEAT-RECOVERY FROM TEXTILE DRYERS
    不详
    AMERICAN DYESTUFF REPORTER, 1986, 75 (08): : 16 - 17
  • [23] Mathematical modelling of radial continuous crossflow agricultural dryers
    Cenkowski, Stefan
    Sokhansanj, Shahab
    Journal of Food Process Engineering, 1988, 10 (03) : 165 - 181
  • [24] Use of continuous-flow grain dryers in Thailand
    Bovornusvakool, K
    GRAIN DRYING IN ASIA, 1996, (71): : 198 - 200
  • [25] Assessment of finishing processes by exhaustion principle for textile fabrics: An exergetic approach
    Cay, Ahmet
    Tarakcioglu, Isik
    Hepbasli, Arif
    APPLIED THERMAL ENGINEERING, 2009, 29 (11-12) : 2554 - 2561
  • [26] Modeling and flowsheet simulation of continuous fluidized bed dryers
    Alaathar, Ibrahim
    Hartge, Ernst-Ulrich
    Heinrich, Stefan
    Werther, Joachim
    POWDER TECHNOLOGY, 2013, 238 : 132 - 141
  • [27] Exergetic analysis and thermoeconomic study for a container-housed engine
    Sala, J. M.
    Lopez-Gonzalez, L. M.
    de Adana, M. Ruiz
    Miguez, J. L.
    Eguia, J.
    Flores, I.
    APPLIED THERMAL ENGINEERING, 2006, 26 (16) : 1840 - 1850
  • [28] Exergetic analysis of anaerobic digestion of stillage: Case study in Brazil
    Pinto, CP
    Nebra, SA
    Cortez, LAB
    OCOS 2000: FROM THERMO-ECONOMICS TO SUSTAINABILITY, PTS 1-4, 2000, : 1517 - 1527
  • [29] Channel System for Steam Heating of the Contact Surface of Roller Dryers in the Textile Industry
    E. V. Shuvalov
    L. I. Zhmakin
    N. M. Sharpar
    Fibre Chemistry, 2017, 48 : 442 - 445
  • [30] TECHNOECONOMIC ANALYSIS OF TYPICAL DRYERS
    SODHA, MS
    CHANDRA, R
    PATHAK, K
    SINGH, NP
    BANSAL, NK
    ENERGY CONVERSION AND MANAGEMENT, 1991, 31 (06) : 509 - 513
12345