The effect of temperature on mechanical properties of oxide scales formed on a carbon steel in a simulated municipal solid waste incineration environment

被引：13

作者：

Morales, M. ^{[1
]}

Chimenos, J. M. ^{[1
]}

Espiell, F. ^{[1
]}

Segarra, M. ^{[1
]}

机构：

[1] Univ Barcelona, Dept Ciencia Mat & Engn Met, Ctr DIOPMA, E-08028 Barcelona, Spain

来源：

SURFACE & COATINGS TECHNOLOGY | 2014年 / 238卷

关键词：

Mechanical properties; Carbon steel; Chlorides; High temperature corrosion; Municipal solid waste incineration; Instrumented indentation technique; POWER-GENERATING SYSTEMS; BOILER TUBES; CORROSION; DEPOSITS; BEHAVIOR; HARDNESS; MODELS; IRON;

D O I：

10.1016/j.surfcoat.2013.10.035

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

The effect of exposure temperature on the mechanical properties of scales in a carbon steel was investigated in a simulated waste incineration environment consisting of a gas mixture (N-2-O-2-H2O-HCI) with samples immersed in a salt (K2SO4-Na2SO4-ZnCl2-KCI) in the temperature range of 573 to 773 K. The microstructure, corrosion rate, elastic modulus (E) and hardness (H) of scales were determined by SEM, XRD, descaled weight loss and instrumented indentation technique. The results indicated that both the E and H decreased as a negative exponential function of temperature, thus obtaining a low mechanical and microstructural integrity of scales with high defect density between 673 and 773 K. (C) 2013 Elsevier B.V. All rights reserved.

引用

页码：51 / 57

页数：7

共 50 条

[41] Co-disposal of municipal solid waste incineration bottom ash (MSWIBA) and steel slag (SS) to improve the geopolymer materials properties
Wang, Zhengdong
Xie, Guangming
Zhang, Weizhuo
Liu, Jun
Jin, Hesong
Xing, Feng
WASTE MANAGEMENT, 2023, 171 : 86 - 94
[42] Incorporation of treated municipal solid waste incineration electrostatic precipitator fly ash as partial replacement of Portland cement: Effect on early age behaviour and mechanical properties
Lenormand, Thibault
Roziere, Emmanuel
Loukili, Ahmed
Staquet, Stephanie
CONSTRUCTION AND BUILDING MATERIALS, 2015, 96 : 256 - 269
[43] Effects of pre-curing temperatures on the mechanical properties and microstructural development of impregnated municipal solid waste incineration bottom ash mortar
Liu, Yu
Zhao, Xiao
Shen, Zhao Lin
Deng, Jie
CONSTRUCTION AND BUILDING MATERIALS, 2023, 369
[44] Enhanced mechanical properties and mechanism of iron ore tailings-based geopolymers modified by municipal solid waste incineration fly ash
Zhan, Xinyuan
Tang, Lei
Yue, Zhengbo
Lu, Hongyu
Wang, Jin
JOURNAL OF BUILDING ENGINEERING, 2024, 98
[45] Understanding room-temperature magnetic properties of anthropogenic ashes from municipal solid waste incineration to assess potential impacts and resources
Funari, V.
Mantovani, L.
Vigliotti, L.
Dinelli, E.
Tribaudino, M.
JOURNAL OF CLEANER PRODUCTION, 2020, 262
[46] Effect of corrosion on IF-Steel in simulated-marine environment via its mechanical properties
Kumar, Veerendra
Tiwari, S. K.
Sharma, Nitin
MATERIALS TODAY COMMUNICATIONS, 2023, 34
[47] Effect of Oxide Particles on Microstructure and Mechanical Properties of the 45 Carbon Structural Steel
Chen, Bin
Feng, Jianhang
Zhai, Yongzhen
Sun, Zhonghua
Liu, Hongbo
Jiang, Yanfei
He, Jun
Peng, Huifen
MATERIALS, 2020, 13 (05)
[48] Effect of Chemical Treatment on Mechanical Properties of Municipal Solid Waste and Banana Fiber Reinforced Polymer Composites
Aseer, J. Ronald
Sankaranarayanasamy, K.
Jayabalan, P.
APPLIED MECHANICS, FLUID AND SOLID MECHANICS, 2014, 871 : 253 - +
[49] Effect of Quenching Temperature on Microstructure and Mechanical Properties of Medium-Carbon Steel
Elshaer, Ramadan N.
Ibrahim, Khaled M.
Ibrahim, Mervat M.
Sobh, Arafa S.
METALLOGRAPHY MICROSTRUCTURE AND ANALYSIS, 2021, 10 (04) : 485 - 495
[50] Effect of Quenching Temperature on Microstructure and Mechanical Properties of Medium-Carbon Steel
Ramadan N. Elshaer
Khaled M. Ibrahim
Mervat M. Ibrahim
Arafa S. Sobh
Metallography, Microstructure, and Analysis, 2021, 10 : 485 - 495

← 1 2 3 4 5 →