Experimental Research on Thermal Performance of Lightweight Envelope Integrated with Phase Change Material

被引：0
|
作者：
Wang, Jun [1 ]
Xu, Long [1 ]
Long, Enshen [1 ]
机构：
[1] Sichuan Univ, Coll Architecture & Environm, Chengdu 610065, Peoples R China
来源：
PROCEEDINGS OF THE 8TH INTERNATIONAL SYMPOSIUM ON HEATING, VENTILATION AND AIR CONDITIONING, VOL 1: INDOOR AND OUTDOOR ENVIRONMENT | 2014年 / 261卷
关键词：
Lightweight envelope; Phase change material; Thermal performance;
D O I：
10.1007/978-3-642-39584-0_30
中图分类号：
TU [建筑科学];
学科分类号：
0813 ;
摘要：
Present relief camp built with lightweight envelope has obvious cold-house effect and poor indoor thermal environment. Advantage of phase change material provides one possible way to improve thermal performance of lightweight envelope. This study analyzed the thermal performance of lightweight envelope with and without PCM and presented their difference by establishing one experimental system, including one special model with PCM and one ordinary model without PCM. The results show that the lightweight envelope integrated with PCM has better thermal performance and thermal inertia than those of lightweight envelope without PCM. Meanwhile, PCM applied in lightweight envelope can make indoor air temperature fluctuation be weak. This study provides some guides for structure design and optimization of relief camp, in order to acquiring favorable indoor thermal environment.
引用
收藏
页码：275 / 280
页数：6
相关论文
共 50 条
  • [21] Numerical investigation on thermal performance of the solar wall integrated with phase change material
    Duan, Shuangping
    Huang, Changyan
    Meng, Chuang
    ENERGY AND BUILDINGS, 2025, 336
  • [22] Study on thermal performance of dynamic insulation roof integrated with phase change material
    Yu, Jinghua
    Yang, Hongyun
    Zhao, Jingang
    Zhang, Chong
    Qian, Congcong
    Chen, Yanhua
    Tang, Xiaoliang
    ENERGY AND BUILDINGS, 2024, 303
  • [23] Thermal and electrical performance of a BIPV integrated with a microencapsulated phase change material layer
    Ho, C. J.
    Tanuwijava, A. O.
    Lai, Chi-Ming
    ENERGY AND BUILDINGS, 2012, 50 : 331 - 338
  • [24] Evaluation of the thermal performance of an inclined solar chimney integrated with a phase change material
    Li, Wuyan
    Li, Zidong
    Xie, Ling
    Li, Yongcai
    Long, Tianhe
    Huang, Sheng
    Lu, Jun
    Wang, Zhihao
    ENERGY AND BUILDINGS, 2022, 270
  • [25] Optimization of thermal performance of building integrated solar collector with Phase Change Material
    Bouhssine, Z.
    Faraji, M.
    Najam, M.
    El Alami, M.
    2014 INTERNATIONAL RENEWABLE AND SUSTAINABLE ENERGY CONFERENCE (IRSEC), 2014, : 720 - 722
  • [26] On the thermal performance of evacuated tube solar collector integrated with phase change material
    Olfian, Hassan
    Ajarostaghi, Seyed Soheil Mousavi
    Ebrahimnataj, Mohammadreza
    Farhadi, Mousa
    Arici, Muslum
    SUSTAINABLE ENERGY TECHNOLOGIES AND ASSESSMENTS, 2022, 53
  • [27] Thermal performance analysis of lightweight phase change envelopes
    Li, Wei
    Feng, Can
    Wang, Yuexin
    Wang, Jing
    Zhang, Xu
    Zhang, Lilu
    Dong, Yan
    Zhao, Jun
    ENERGY AND BUILDINGS, 2024, 323
  • [28] Research on Thermal Storage Performance of Solar Phase Change Thermal Storage Integrated Device
    Li, Zhiyong
    Fu, Xueyou
    Pan, Di
    Wang, Hao
    Peng, Ye
    10TH INTERNATIONAL SYMPOSIUM ON HEATING, VENTILATION AND AIR CONDITIONING, ISHVAC2017, 2017, 205 : 1357 - 1363
  • [29] Influence of phase change material (PCM) parameters on the thermal performance of lightweight building walls with different thermal resistances
    Liu, Zu'an
    Hou, Jiawen
    Huang, Yue
    Zhang, Jiaying
    Meng, Xi
    Dewancker, Bart Julien
    CASE STUDIES IN THERMAL ENGINEERING, 2022, 31
  • [30] Experimental investigation on thermal performance of battery using composite phase change material
    Powar, Kanhaiya
    Patil, Sharad
    MULTISCALE AND MULTIDISCIPLINARY MODELING EXPERIMENTS AND DESIGN, 2025, 8 (01)
12345