Using mathematical modeling to control topographical properties of poly (ε-caprolactone) melt electrospun scaffolds

Melt electrospinning creates fibrous scaffolds using direct deposition. The main challenge of melt electrospinning is controlling the topography of the scaffolds for tissue engineering applications. Mathematical modeling enables a better understanding of the parameters that determine the topography of scaffolds. The objective of this study is to build two types of mathematical models. First, we modeled the melt electrospinning process by incorporating parameters such as nozzle size, counter electrode distance and applied voltage that influence fiber diameter and scaffold porosity. Our second model describes the accumulation of the extruded microfibers on flat and round surfaces using data from the microfiber modeling. These models were validated through the use of experimentally obtained data. Scanning electron microscopy (SEM) was used to image the scaffolds and the fiber diameters were measured using Quartz-PCI Image Management Systems (R) in SEM to measure scaffold porosity.