Formability of Twin-Roll Cast Age-Hardenable Mg-Zn Alloys

被引：1

作者：

Venkatesan, Kishore ^{[1
]}

Borbidge, Wendy ^{[1
]}

Kellam, Michael ^{[1
]}

East, Daniel ^{[1
]}

Gibson, Mark ^{[1
]}

Liang, Daniel ^{[1
]}

机构：

[1] CSIRO Mat Sci & Engn, Clayton S MDC, Clayton, Vic 3169, Australia

来源：

LIGHT METALS TECHNOLOGY 2009 | 2009年 / 618-619卷

关键词：

wrought applications; age-hardening; twin roll casting; annealed;

D O I：

10.4028/www.scientific.net/MSF.618-619.233

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

The suitability of a twin-roll cast (TRC) age-hardenable alloy for wrought applications is explored. A Mg-4Zn (wt.%) alloy, 3mm thick, was cast using the TRC route. Deviating from the traditional practice of homogenization followed by age-hardening in die/sand cast parts, the TRC sheet, cut into small strips, was hot rolled and annealed after homogenization. They were then deep drawn and subsequently age-hardened. The rollability, mechanical properties and microstructure of the alloy at different stages of processing and after forming, are presented and discussed.

引用

页码：233 / 237

页数：5

共 50 条

[21] Clustering in Age-Hardenable Aluminum Alloys
Dumitraschkewitz, Phillip
Gerstl, Stephan S. A.
Stephenson, Leigh T.
Uggowitzer, Peter J.
Pogatscher, Stefan
ADVANCED ENGINEERING MATERIALS, 2018, 20 (10)
[22] Mitigating Intergranular Stress Corrosion Cracking in Age-Hardenable Al-Zn-Mg-Cu Alloys
M. Ajay Krishnan
V. S. Raja
Shweta Shukla
S. M. Vaidya
Metallurgical and Materials Transactions A, 2018, 49 : 2487 - 2498
[23] Mitigating Intergranular Stress Corrosion Cracking in Age-Hardenable Al-Zn-Mg-Cu Alloys
Krishnan, M. Ajay
Raja, V. S.
Shukla, Shweta
Vaidya, S. M.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2018, 49A (06): : 2487 - 2498
[24] Bake-hardenable Mg-Al-Zn-Mn-Ca sheet alloy processed by twin-roll casting
Bian, M. Z.
Sasaki, T. T.
Nakata, T.
Yoshida, Y.
Kawabe, N.
Kamado, S.
Hono, K.
ACTA MATERIALIA, 2018, 158 : 278 - 288
[25] Effects of alloying addition and twin-roll casting process on Mg-2Zn based-alloys with high strength and high formability
Zhang, Yun
Jiang, Haitao
Wang, Yujiao
Kang, Qiang
Wang, Jiayi
Lin, Hongtao
Zhang, Guihua
MATERIALS RESEARCH EXPRESS, 2019, 6 (08)
[26] Alleviation of basal texture in twin-roll cast Mg-3Al-1Zn alloy
Masoumi, M.
Zarandi, F.
Pekguleryuz, M. O.
SCRIPTA MATERIALIA, 2010, 62 (11) : 823 - 826
[27] Strengthening mechanism of age-hardenable Al-xMg-3Zn alloys
Ding, Qingwei
Zhang, Di
Pan, Yanlin
Hou, Shengli
Zhuang, Linzhong
Zhang, Jishan
MATERIALS SCIENCE AND TECHNOLOGY, 2019, 35 (09) : 1071 - 1080
[28] Relieving segregation in twin-roll cast Mg-8Al-2Sn-1Zn alloys via controlled rolling
Zhang, Shao-You
Wang, Cheng
Ning, Hong
Wang, Tong
Zhang, Cheng-Cheng
Yang, Zhi-Zheng
Wang, Hui-Yuan
JOURNAL OF MAGNESIUM AND ALLOYS, 2021, 9 (01) : 254 - 265
[29] Effect of manganese and exposure to elevated on the corrosion of twin-roll cast Al-Mg temperature alloys
Slamova, M.
Janecek, M.
KOVOVE MATERIALY-METALLIC MATERIALS, 2007, 45 (03): : 141 - 148
[30] PHASE IDENTIFICATION IN TWIN-ROLL CAST Al-Li ALLOYS
Bajtosova, Lucia
Grydin, Olexandr
Stolbchenko, Mykhailo
Schaper, Mirko
Krivska, Barbora
Kralik, Rostislav
Slapakova, Michaela
Cieslar, Miroslav
31ST INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS, METAL 2022, 2022, : 587 - 592

← 1 2 3 4 5 →