A novel method for damage analysis of CFRP single-lap bolted, bonded and hybrid joints under compression

被引：25

作者：

Zhang, Hongzhuang ^{[1
]}

Li, Changyou ^{[1
]}

Xu, Mengtao ^{[1
]}

Liu, Zhendong ^{[1
]}

Jia, Dawei ^{[2
]}

Zhang, Yimin ^{[3
]}

机构：

[1] Northeastern Univ, Sch Mech Engn & Automat, Shenyang, Peoples R China

[2] AVIC SAC Commercial Aircraft Co Ltd, Shenyang, Peoples R China

[3] Shenyang Univ Chem Technol, Sch Inst Equipment Reliabil, Shenyang, Peoples R China

来源：

COMPOSITE STRUCTURES | 2020年 / 251卷

基金：

中国博士后科学基金; 中国国家自然科学基金;

关键词：

Polymer-matrix composites (PMCs); Mechanical properties; Crack; Fracture; Acoustic emission; ACOUSTIC-EMISSION; OPEN-HOLE; COMPOSITE JOINTS; FAILURE ANALYSIS; FINITE-ELEMENT; TENSILE; CARBON/EPOXY; MECHANISMS; STRENGTH; SIGNALS;

D O I：

10.1016/j.compstruct.2020.112636

中图分类号：

O3 [力学];

学科分类号：

08 ; 0801 ;

摘要：

The purpose of this paper is to investigate the failure mechanisms of carbon fiber reinforced composites (CFRP) single-lap bolted, bonded and hybrid bolted/bonded joints during compression. The failure process and the failure mechanisms of the compression tests were analyzed using field emission scanning electron microscope (FESEM) and acoustic emission (AE) technique. A novel method is proposed to obtain the relationship between the FESEM analysis and AE signals. The crack data is obtained by identifying, segmenting and quantizing FESEM images based on image processing technology. The final results give effective AE parameters for iden-tifying crack damage in composite joints, and show the superiority of the proposed method. The research in this paper puts forward important suggestions for the application of AE technique in composites and fault diagnosis.

引用

页数：16

共 50 条

[41] Closure to Discussion of 'An Analysis of Adhesive-Bonded Single-Lap Joints'
1600, American Society of Mechanical Engineers (ASME) (51):
[42] Three-dimensional stress analysis of bolted single-lap composite joints
Saab AB, Linkoping, Sweden
Compos Struct, 3 (195-216):
[43] Failure analysis and size optimization of CFRP composite single-lap bonded joints based on the influence of multiple parameters
Yang, Kang
Liu, Ziyi
Qi, Xin
Li, Pengyang
Ji, Shude
Liu, Peng
Liu, Zhipeng
SCIENTIFIC REPORTS, 2024, 14 (01):
[44] Influence of adhesive spew in bonded single-lap joints
Kilic, B.
Madenci, E.
Ambur, D. R.
ENGINEERING FRACTURE MECHANICS, 2006, 73 (11) : 1472 - 1490
[45] Failure Load Prediction by Damage Zone Method for Single-lap Bonded Joints of Carbon Composite and Aluminum
Nguyen, Khanh-Hung
Kweon, Jin-Hwe
Choi, Jin-Ho
JOURNAL OF COMPOSITE MATERIALS, 2009, 43 (25) : 3031 - 3056
[46] Benchmarking of three-dimensional finite element models of CFRP single-lap bonded joints
Diaz, J.
Romera, L.
Hernandez, S.
Baldomir, A.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, 2010, 30 (03) : 178 - 189
[47] Strength prediction in CFRP woven laminate bolted single-lap joints under quasi-static loading using XFEM
Ahmad, H.
Crocombe, A. D.
Smith, P. A.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2014, 66 : 82 - 93
[48] Strength of adhesively bonded single-lap and lap-smear joints
Tong, L
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 1998, 35 (20) : 2601 - 2616
[49] Effects of Impact on the Failure of CFRP/Al Bonded Single-lap Joints with Different Overlap Length
Ma, Yanyan
Zhang, Kaifu
Yang, Zhaojun
Li, Yuan
ADVANCED MATERIALS SCIENCE AND TECHNOLOGY, PTS 1-2, 2011, 181-182 : 814 - 819
[50] Experimental and numerical investigations of adhesively bonded CFRP single-lap joints subjected to tensile loads
Sun, Ligang
Li, Cheng
Tie, Ying
Hou, Yuliang
Duan, Yuechen
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, 2019, 95

← 1 2 3 4 5 →