Influence of ferritic nitrocarburizing on the high-temperature corrosion-fatigue properties of the Si-Mo-Al cast iron SiMo1000

被引：10
|
作者：
Xiang, Shengmei [1 ]
Jonsson, Stefan [1 ]
Hedstrom, Peter [1 ]
Zhu, Baohua [2 ]
Odqvist, Joakim [1 ]
机构：
[1] KTH, Royal Inst Technol, Dept Mat Sci & Engn, SE-10044 Stockholm, Sweden
[2] Scania CV AB, Mat Technol, S-15187 Sodertalje, Sweden
来源：
INTERNATIONAL JOURNAL OF FATIGUE | 2021年 / 143卷
关键词：
Corrosion fatigue; Cast iron; High temperature; Controlled atmosphere; Ferritic nitrocarburizing; THERMOMECHANICAL FATIGUE; BEHAVIOR; NITRIDE; ALLOYS;
D O I：
10.1016/j.ijfatigue.2020.105984
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
The influence of ferritic nitrocarburizing on the high-temperature corrosion-fatigue properties of the Si-Mo-Al cast iron SiMo1000 is investigated in the present study. It was found that nitrocarburizing effectively increases the surface hardness, but dramatically decreases the fatigue and oxidation resistance of SiMo1000. The fatigue resistance is reduced due to two types of microcracks formed after nitrocarburizing. The oxidation resistance is dramatically diminished due to the formation of microcracks, and the depletion of aluminum in the matrix from nitride precipitation during the exposure at 800 degrees C. The corrosion-fatigue synergy is found to cause severe decarburization (i.e. graphite depletion) in nitrocarburized SiMo1000.
引用
收藏
页数：14
相关论文
共 50 条
  • [41] Influence of the high-temperature annealing on the structure and mechanical properties of vacuum-arc coatings from Mo/(Ti+6 wt % Si)N
    Beresnev, V. M.
    Klimenko, S. A.
    Sobol', O. V.
    Litovchenko, S. V.
    Pogrebnjak, A. D.
    Srebnyuk, P. A.
    Kolesnikov, D. A.
    Meilekhov, A. A.
    Postel'nik, A. A.
    Nemchenko, U. S.
    JOURNAL OF SUPERHARD MATERIALS, 2017, 39 (03) : 172 - 177
  • [42] Intragranular　Rare　Earth－rich　Phases　in　As－cast　High－temperature　Ti－5Al－4Sn－2Zr－1MO－0．25Si－1Nd　Alloy
    李阁平
    李东
    刘羽寅
    关少轩
    王青江
    胡壮麒
    JournalofRareEarths, 1995, (04)
  • [43] Intragranular rare earth-rich phases in As-cast high-temperature Ti-5Al-4Sn-2Zr-1Mo-0.25Si-1Nd alloy
    Li, GP
    Li, D
    Liu, YY
    Guan, SX
    Wang, QJ
    Hu, ZQ
    JOURNAL OF RARE EARTHS, 1995, 13 (04) : 308 - 311
  • [44] High-temperature adsorption of n-alkanes on ZSM-5 zeolites:: influence of the Si/Al ratio and the synthesis method on the low-coverage adsorption properties
    Arik, IC
    Denayer, JF
    Baron, GV
    MICROPOROUS AND MESOPOROUS MATERIALS, 2003, 60 (1-3) : 111 - 124
  • [45] Comment on "High-temperature mechanical and fatigue properties of cast alloys intended for use in exhaust manifolds" by Ekstrom et Al. (Mater. Sci. Eng. A 616 (2014) 78)
    Li, D.
    Sloss, C.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2015, 624 : 90 - 91
  • [46] The mechanical properties and high-temperature oxidation behavior of (TiZr)65-x-yNb15Mo20SixAly 65-x-y Nb 15 Mo 20 Si x Al y refractory high entropy alloys
    Zhang, Qingda
    Su, Baoxian
    Wang, Liang
    Liu, Chen
    Li, Zhe
    Li, Zhiwen
    Wang, Binbin
    Luo, Liangshun
    Chen, Ruirun
    Su, Yanqing
    JOURNAL OF ALLOYS AND COMPOUNDS, 2024, 1004
  • [47] Evolution of iron-rich intermetallics and its effect on the mechanical properties of Al-Cu-Mn-Fe-Si alloys after thermal exposure and high-temperature tensile testing
    Lin, Bo
    He, Xiangxiang
    Xu, Rui
    Zhao, Yuliang
    Lu, Yemao
    Xiao, Huaqiang
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2023, 23 : 2527 - 2541
  • [48] An investigation of low cycle fatigue properties, deformation characteristics and fracture behaviour of the Ti-6Al-1.7Zr-3.3Mo-0.3Si alloy: Influence of temperature, strain rate and hold period
    Singh, B. K.
    Singh, P. N.
    Singh, V.
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2006, 59 (04): : 447 - 461
  • [49] Simultaneously improving high-temperature strength and ductility of as-cast (TiB + TiC)/Ti-6Al-4Sn-7Zr-1Nb-1Mo-1W-0.2Si via triplex heat treatment
    Wu, Jing-Xi
    Du, Zhi-Ming
    Chen, Yu-Yong
    Xie, Hua-Sheng
    Peng, Qing-Jun
    Liu, Shi-Bing
    Zhang, Shu-Zhi
    Li, Ke-Feng
    Zhang, Yu
    RARE METALS, 2025, 44 (01) : 652 - 661
  • [50] Influence of quenching plus aging on microstructures and mechanical properties evolutions for Ti-Al-Sn-Zr-Mo-Si-Nb-Ta-Er-C near-α high temperature titanium alloys
    Ma, Xiaozhao
    Chen, Ziyong
    Xiang, Zhilei
    Zhang, Shiwei
    Liu, Yingying
    Ding, Xuxu
    MATERIALS TODAY COMMUNICATIONS, 2024, 38
12345