Low temperature synthesis of anorthite based glass-ceramics via sintering and crystallization of glass-powder compacts

被引:62
|
作者
Marques, V. M. F.
Tulyaganov, D. U.
Agathopoulos, S.
Gataullin, V. Kh.
Kothiyal, G. P.
Ferreira, J. M. F. [1 ]
机构
[1] Univ Aveiro, Dept Ceram & Glass Engn, CICECO, P-3810193 Aveiro, Portugal
[2] Sci Res Inst Space Engn, Tashkent 700128, Uzbekistan
[3] Bhabha Atom Res Ctr, Tech Phys & Prototype Engn Div, Bombay 400085, Maharashtra, India
关键词
sintering; crystallization; microstructure-final; glass-ceramics; anorthite;
D O I
10.1016/j.jeurceramsoc.2005.07.055
中图分类号
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
Anorthite based glass-ceramics were synthesized. The investigated glass compositions are located close to the anorthite-rich corner of the fluorapatite-anorthite-diopside ternary system. Glass powder compacts with mean particle size of 2 and 10 mu m were prepared. Sintering behaviour, crystallization and the properties of glass-ceramics were investigated between 800 and 950 degrees C. In the case of specimens made from the finer particles, complete densification was achieved at a remarkably low temperature (825 degrees C) and the highest mechanical strength was obtained at 850 degrees C, but density significantly decreased at higher temperatures. The samples prepared from the larger particles exhibited higher values of density, shrinkage and bending strength within a wider temperature range (825-900 degrees C). Anorthite was predominantly crystallized between 850 and 950 degrees C, along with traces of fluorapatite. Diopside was detected only in the MgO richer compositions. (c) 2005 Elsevier Ltd. All rights reserved.
引用
收藏
页码:2503 / 2510
页数:8
相关论文
共 50 条
  • [31] Anisotropic shrinkage during sintering of glass-powder compacts under uniaxial stresses: Qualitative assessment of experimental evidence
    Aldo R. Boccaccini
    Eugene A. Olevsky
    Metallurgical and Materials Transactions A, 1997, 28 : 2397 - 2404
  • [32] Production of fly ash based glass-ceramics by sintering
    Erol, M
    Küçükbayrak, S
    Ersoy-Meriçboyu, A
    Öveçoglu, ML
    EURO CERAMICS VIII, PTS 1-3, 2004, 264-268 : 1839 - 1842
  • [33] Processing of Latvian silicate waste into glass-ceramics by powder technology and sintering
    Rozenstrauha, I
    Wu, JP
    Boccaccini, AR
    GLASS TECHNOLOGY, 2005, 46 (03): : 248 - 254
  • [34] Anisotropic shrinkage during sintering of glass-powder compacts under uniaxial stresses: Qualitative assessment of experimental evidence
    Boccaccini, AR
    Olevsky, EA
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1997, 28 (11): : 2397 - 2404
  • [35] Crystallization of canasite/frankamenite-based glass-ceramics
    Miller, CA
    Reaney, IM
    Hatton, PV
    James, PF
    CHEMISTRY OF MATERIALS, 2004, 16 (26) : 5736 - 5743
  • [36] Thermal and dielectric properties of glass-ceramics sintered based on diopside and anorthite composition
    Kim, Jinho
    Hwang, Seongjin
    Sung, Wookyung
    Kim, Hyungsun
    JOURNAL OF ELECTROCERAMICS, 2009, 23 (2-4) : 209 - 213
  • [37] Thermal Properties of Anorthite Based Glass-Ceramics Containing ZnO Particle Filler
    Lee, Yuna
    Kang, Seunggu
    JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY, 2016, 16 (10) : 11069 - 11074
  • [38] Effect of sintering additives on the densification, crystallization and flexural strength of sintered glass-ceramics from waste granite powder
    Lu, Jinshan
    Li, Yingde
    Zou, Chuanming
    Liu, Zhiyong
    Wang, Chunlei
    MATERIALS CHEMISTRY AND PHYSICS, 2018, 216 : 1 - 7
  • [39] Thermal approach to evaluate the sintering–crystallization ability in a nepheline–forsterite-based glass-ceramics
    F. Andreola
    L. Barbieri
    I. Lancellotti
    M. I. Martín
    J. Ma. Rincòn
    M. Romero
    Journal of Thermal Analysis and Calorimetry, 2016, 123 : 241 - 248
  • [40] Thermal and dielectric properties of glass-ceramics sintered based on diopside and anorthite composition
    Jinho Kim
    Seongjin Hwang
    Wookyung Sung
    Hyungsun Kim
    Journal of Electroceramics, 2009, 23 : 209 - 213