Dross formation and process parameters analysis of fibre laser cutting of stainless steel thin sheets

被引：26
|
作者：
Teixidor, Daniel [1 ]
Ciurana, Joaquim [1 ]
Rodriguez, Ciro A. [2 ]
机构：
[1] Univ Girona, Dept Mech Engn & Civil Construct, Girona 17071, Spain
[2] Tecnol Monterrey, Ctr Innovac Diseno & Tecnol, Monterrey, Mexico
来源：
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY | 2014年 / 71卷 / 9-12期
关键词：
Laser cutting; Fibre laser; Cardiovascular stent; Dross formation; STENT;
D O I：
10.1007/s00170-013-5599-0
中图分类号：
TP [自动化技术、计算机技术];
学科分类号：
0812 ;
摘要：
The coronary stent fabrication requires a high-precision profile cut. Fibre lasers present a solution to accomplish these requirements. This paper presents an experimental study of fibre laser cutting of 316L stainless steel thin sheets. The effect of peak pulse power, pulse frequency and cutting speed on the cutting quality for fixed gas type and gas pressure was investigated. A mathematical model based on energy balances for the dross dimensions was formulated. The dross height and the dross diameter were analysed and compared with the experimental results. This allows adjustment of the process parameters to reduce the dimensions of the dross deposited at the bottom of the workpiece during laser cutting of thin sheets.
引用
收藏
页码：1611 / 1621
页数：11
相关论文
共 50 条
  • [31] Dross formation modeling in the laser beam cutting process using energy-based and gas-based parameters
    Seyedeh Fatemeh Nabavi
    Mohammad Hossein Farshidianfar
    Anooshiravan Farshidianfar
    Saeed Marandi
    The International Journal of Advanced Manufacturing Technology, 2022, 120 : 8169 - 8184
  • [32] Laser Cutting of Square Blanks in Stainless Steel-304 Sheets: HAZ and Thermal Stress Analysis
    Sifullah, A. M.
    Ahmed, Khaled I.
    Nukman, Y.
    Hassan, M. A.
    Hossain, A.
    SAINS MALAYSIANA, 2017, 46 (05): : 755 - 762
  • [33] Optimization of Process Parameters for Laser Cutting Process of Stainless Steel 304: A Comparative Analysis and Estimation with Taguchi Method and Response Surface Methodology
    Nguyen, Vi
    Altarazi, Faisal
    Tran, Thanh
    MATHEMATICAL PROBLEMS IN ENGINEERING, 2022, 2022
  • [34] Fibre laser cutting stainless steel: Fluid dynamics and cut front morphology
    Pocorni, Jetro
    Powell, John
    Deichsel, Eckard
    Frostevarg, Jan
    Kaplan, Alexander F. H.
    OPTICS AND LASER TECHNOLOGY, 2017, 87 : 87 - 93
  • [35] Continuous-wave fiber laser cutting of aluminum thin sheets: effect of process parameters and optimization
    Scintilla, Leonardo Daniele
    OPTICAL ENGINEERING, 2014, 53 (06)
  • [36] ANALYSIS OF HEAT-AFFECTED ZONE FORMATION FOR LASER CUTTING OF STAINLESS-STEEL
    SHENG, PS
    JOSHI, VS
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 1995, 53 (3-4) : 879 - 892
  • [37] Improving the adhesion of thin stainless steel sheets for fibre metal laminate (FML) applications
    Van Rooijen, RGJ
    Sinke, J
    Van der Zwaag, S
    JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, 2005, 19 (16) : 1387 - 1396
  • [38] Improving the adhesion of thin stainless steel sheets for fibre metal laminate (FML) applications
    Van Rooijen, R.G.J. (R.vanRooijen@LR.TUDelft.nl), 1600, Taylor and Francis Ltd. (19):
  • [39] Numerical modeling of cutting process of steel sheets using a laser beam
    Saternus, Zbigniew
    Piekarska, Wieslawa
    Kubiak, Marcin
    Domanski, Tomasz
    Goszczynska-Kroliszewska, Dorota
    XXIII POLISH-SLOVAK SCIENTIFIC CONFERENCE ON MACHINE MODELLING AND SIMULATIONS (MMS 2018), 2019, 254
  • [40] Fibre laser cutting of CFRP thin sheets by multi-passes scan technique
    Leone, C.
    Genna, S.
    Tagliaferri, V.
    OPTICS AND LASERS IN ENGINEERING, 2014, 53 : 43 - 50
12345