Effect of B doping on electrical and thermal properties of SiC bodies fabricated by spark plasma sintering

被引:10
|
作者
Taki, Yukina [1 ]
Kitiwan, Mettaya [1 ,2 ]
Katsui, Hirokazu [1 ]
Goto, Takashi [1 ,3 ]
机构
[1] Tohoku Univ, Inst Mat Res, Aoba Ku, 2-1-1 Katahira, Sendai, Miyagi 9808577, Japan
[2] KMITL, Fac Sci, Dept Phys, Chalongkrung Rd, Bangkok 10520, Thailand
[3] Wuhan Univ Technol, State Key Lab Adv Technol Mat Synth & Proc, 122 Luoshi Rd, Wuhan, Hubei, Peoples R China
关键词
silicon carbide; electrical conductivity; Seebeck coefficient; spark plasma sintering; SILICON-CARBIDE; BORON;
D O I
10.1016/j.matpr.2019.05.249
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
B-doped SiC bodies were fabricated by spark plasma sintering at 2373 K, 50 MPa, 300 s in a vacuum and N-2 atmosphere. The relative density of 1 mol% B doped-SiC body sintered in a vacuum and 5 mol% B doped-SiC body sintered in N-2 atmosphere were 97 and 98%, respectively. The electrical conductivity of B-doped SiC bodies sintered in a vacuum with 0.5 mol% B and that with 1 mol% B sintered in N-2 atmosphere showed semi-insulative conduction in the range of 3-5 x 10(-3) S m(-1) at room temperature. The thermal conductivity of B-doped SiC body at 0.5 at% B sintered in a vacuum were 185 W m(-1) K-1 while that at 1 at% B sintered in N-2 atmosphere were 177 W m(-1) K-1 at room temperature. (C) 2019 Elsevier Ltd. All rights reserved.
引用
收藏
页码:211 / 215
页数:5
相关论文
共 50 条
  • [1] Mechanical properties of β-SiC fabricated by spark plasma sintering
    Yamamoto, TA
    Kondou, T
    Kodera, Y
    Ishii, T
    Ohyanagi, M
    Munir, ZA
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2005, 14 (04) : 460 - 466
  • [2] Mechanical properties of β-SiC fabricated by spark plasma sintering
    Takeshi A. Yamamoto
    Takayuki Kondou
    Yasuhiro Kodera
    Takashi Ishii
    Manshi Ohyanagi
    Zuhair A. Munir
    Journal of Materials Engineering and Performance, 2005, 14 : 460 - 466
  • [3] Microstructural, electrical, and mechanical properties of conductive SiC ceramics fabricated by spark plasma sintering
    Li, Huaxin
    Shen, Weijian
    Yang, Fuquan
    Lu, Chuanyang
    Zheng, Wenjian
    Ma, Yinghe
    Ren, Sendong
    He, Yanming
    Yang, Jianguo
    INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY, 2022, 19 (06) : 3376 - 3391
  • [4] Electrical and thermal properties of off-stoichiometric SiC prepared by spark plasma sintering
    Taki, Yukina
    Kitiwan, Mettaya
    Katsui, Hirokazu
    Goto, Takashi
    JOURNAL OF ASIAN CERAMIC SOCIETIES, 2018, 6 (01): : 95 - 101
  • [5] Conductive SiC ceramics fabricated by spark plasma sintering
    Kim, Kwang Joo
    Jang, Seung Hoon
    Kim, Young-Wook
    Jang, Byung-Koog
    Nishimura, Toshiyuki
    CERAMICS INTERNATIONAL, 2016, 42 (15) : 17892 - 17896
  • [6] A study on the thermal and electrical properties of fabricated Mo-Cu alloy by spark plasma sintering method
    Lee H.-C.
    Lee B.-J.
    Lee, Boong-Joo (bjlee@nsu.ac.kr), 1600, Korean Institute of Electrical Engineers (66): : 1600 - 1604
  • [7] Microstructure and Electrical Properties of AZO/Graphene Nanosheets Fabricated by Spark Plasma Sintering
    Yang, Shuang
    Chen, Fei
    Shen, Qiang
    Lavernia, Enrique J.
    Zhang, Lianmeng
    Materials, 2016, 9 (08):
  • [8] Lossy AlN–SiC composites fabricated by spark plasma sintering
    Xiang-Yu Zhang
    Shou-Hong Tan
    Jing-Xian Zhang
    Dong-Liang Jiang
    Bo Hu
    Chen Gao
    Journal of Materials Research, 2004, 19 : 2759 - 2764
  • [9] Microstructure and properties of Ti3SiC2/SiC nanocomposites fabricated by spark plasma sintering
    Zhang, Jianfeng
    Wu, Ting
    Wang, Lianjun
    Jiang, Wan
    Chen, Lidong
    COMPOSITES SCIENCE AND TECHNOLOGY, 2008, 68 (02) : 499 - 505
  • [10] The effect of samarium doping on structure and enhanced thermionic emission properties of lanthanum hexaboride fabricated by spark plasma sintering
    Zhou, Shenlin
    Zhang, Jiuxing
    Liu, Danmin
    Hu, Qianglin
    Huang, Qingzhen
    PHYSICA STATUS SOLIDI A-APPLICATIONS AND MATERIALS SCIENCE, 2014, 211 (03): : 555 - 564