Influence of roller - burnishing on surface roughness parameters and roundness

被引：1

作者：

Gorog, Augustin ^{[1
]}

Gorogova, Ingrid ^{[1
]}

Stancekova, Dana ^{[2
]}

Janota, Miroslav ^{[2
]}

机构：

[1] Slovak Univ Technol Bratislava, Inst Prod Technol, Fac Mat Sci & Technol Trnava, Bottova 25, Trnava 91724, Slovakia

[2] Univ Zilina, Fac Mech Engn, Univ 1, Zilina 01026, Slovakia

来源：

INNOVATIVE TECHNOLOGIES IN ENGINEERING PRODUCTION (ITEP'18) | 2018年 / 244卷

关键词：

surface roughness; roundness; roller burnishing; measuring; CORROSION; TOOL;

D O I：

10.1051/matecconf/201824401021

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

In order to increase productivity, machining times and market competitiveness of machining production systems, it is important to continuously develop existing technological solutions. The paper deals with surface roughness and roundness after roller burnishing outer rotary surface. Roller burnishing was applied on turned surfaces with different surface roughness. Each outer rotary surface was roller burnished twice with the same conditions (pressing force, peripheral speed of machine part, feed of tool). The parameters of the surface roughness Ra, Rq and Rt were measured after each single roller burnishing. The results show that the surface roughness is decreasing after the first roller burnishing cycle (additional roller burnishing had only negligible influence on surface roughness) and the original surface roughness has a significant influence on change of surface roughness after roller burnishing.

引用

页数：9

共 50 条

[31] Effect of Roller Burnishing Parameters on Roughness Surface and Hardness of Unalloyed S355 J0 Steel by Using Response Surface Methodology
Mohamed T.
Hamid H.
Salah A.
Salim B.
Mohamed, Tourab (mohtou@yahoo.fr); Hamid, Hamadache (hamham36@yahoo.fr); Salah, Aguib (salah.ldmv@gmail.com); Salim, Belhadi (belhadi.salim@yahoo.fr), 1600, Jan-Evangelista-Purkyne-University (17): : 59 - 60
[32] Improvement of roundness of cylindrical parts using hybrid electrochemical smoothing and roller burnishing process
El-Taweel, T. A.
Ebeid, S. J.
PROCEEDINGS OF THE 35TH INTERNATIONAL MATADOR CONFERENCE: FORMERLY THE INTERNATIONAL MACHINE TOOL DESIGN AND RESEARCH CONFERENCE, 2007, : 85 - +
[33] The influence of milling-burnishing successive and simultaneous processes on the surface roughness
Grigoras, C. C.
Brabie, G.
Chirita, B.
MODTECH INTERNATIONAL CONFERENCE - MODERN TECHNOLOGIES IN INDUSTRIAL ENGINEERING IV, PTS 1-7, 2016, 145
[34] The relationship between surface roughness and burnishing factor in the burnishing process
Lin, YC
Wang, SW
Lai, HY
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2004, 23 (9-10): : 666 - 671
[35] The relationship between surface roughness and burnishing factor in the burnishing process
Y. C. Lin
S. W. Wang
H.-Y. Lai
The International Journal of Advanced Manufacturing Technology, 2004, 23 : 666 - 671
[36] The Influence of the Burnishing Process on the Change in Surface Hardness, Selected Surface Roughness Parameters and the Material Ratio of the Welded Joint of Aluminum Tubes
Labuda, Wojciech
Wieczorska, Agata
Charchalis, Adam
MATERIALS, 2024, 17 (01)
[37] Factors Affecting the Surface Roughness in Burnishing
Smirnov A.V.
Kuznetsov V.A.
Russian Engineering Research, 2018, 38 (10) : 814 - 817
[38] Experimental techniques for studying the effects of milling roller-burnishing parameters on surface integrity
El-Khabeery, MM
El-Axir, MH
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2001, 41 (12): : 1705 - 1719
[39] Experimental techniques for studying the effects of milling roller-burnishing parameters on surface integrity
El-Khabeery, M.M.
El-Axir, M.H.
AEJ - Alexandria Engineering Journal, 2001, 40 (03): : 355 - 365
[40] SURFACE HARDENING PLASTIC COMPONENTS BY ROLLER BURNISHING
SHTURMAN, AA
BERLIN, AN
RUSSIAN ENGINEERING JOURNAL, 1973, 53 (08): : 45 - 47

← 1 2 3 4 5 →