Effect of Se beam flux rate on photovoltaic properties of CIGS cells fabricated by three-stage co-evaporation process

被引：7

作者：

Yun, Jae Ho ^{[1
]}

Kim, Ki Hwan ^{[2
]}

Ahn, Byung Tae ^{[2
]}

Yoon, Kyung Hoon ^{[1
]}

机构：

[1] Korea Inst Energy & Res, Photovolta Res Grp, Taejon 305343, South Korea

[2] Korea Adv Inst Sci & Technol, Dept Mat Sci & Engn, Taejon 305701, South Korea

来源：

PHYSICA STATUS SOLIDI C - CURRENT TOPICS IN SOLID STATE PHYSICS, VOL 3, NO 8 | 2006年 / 3卷 / 08期

关键词：

D O I：

10.1002/pssc.200669611

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The conversion efficiency of CIGS cells fabricated with three stage co-evaporation process was improved by regulating the Se beam flux rate. When the Se beam flux rate was 15 angstrom/s or less, the surface of CIGS was uniform and it showed tightly connected structure and facet shape structure. However pits and crevices were found on the surface in the condition of Se beam flux rate above 15 angstrom/s, which caused an increase in the leakage current. The best CIGS solar cell was obtained at the Se beam flux rate of 15 angstrom/s and it had the following photovoltaic parameters: conversion efficiency of 17.57 %, J(sc) = 36.48 m angstrom/cm(2), V-oc = 0.655 V and FF = 73.5 % in an active area of 0.45 cm(2). (c) 2006 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

引用

页码：2547 / +

页数：2

共 50 条

[21] Characterization of Group I-rich Growth During (Ag,Cu)(In,Ga)Se2 Three-stage Co-evaporation
Chen, Lei
Lee, JinWoo
McCandless, Brian E.
Soltanmohammad, Sina S.
Shafarman, William N.
2014 IEEE 40TH PHOTOVOLTAIC SPECIALIST CONFERENCE (PVSC), 2014, : 314 - 318
[22] A single source three-stage evaporation approach to CIGS absorber layer for thin film solar cells
Xu, Congkang
Zhang, Hongwang
Parry, James
Perera, Samanthe
Long, Gen
Zeng, Hao
SOLAR ENERGY MATERIALS AND SOLAR CELLS, 2013, 117 : 357 - 362
[23] Dynamic radiative properties of the Cu(In,Ga)Se2 layer during the co-evaporation process
Scholdstrom, J.
Zimmermann, U.
Edoff, M.
PROGRESS IN PHOTOVOLTAICS, 2010, 18 (05): : 321 - 327
[24] Precise Se-flux control and its effect on Cu(In,Ga)Se2 absorber layer deposited at low substrate temperature by multi stage co-evaporation
Nishiwaki, Shiro
Feurer, Thomas
Bissig, Benjamin
Avancini, Enrico
Carron, Romain
Buecheler, Stephan
Tiwari, Ayodhya N.
THIN SOLID FILMS, 2017, 633 : 18 - 22
[25] CdTe Solar Cells with Iron Pyrite Thin Film Back Contacts Fabricated by a Hybrid Sputtering/Co-evaporation Process
Bhandari, Khagendra P.
Tan, Xinxuan
Zereshki, Peymon
Collins, Robert W.
Ellingson, Randy J.
2016 IEEE 43RD PHOTOVOLTAIC SPECIALISTS CONFERENCE (PVSC), 2016, : 1425 - 1428
[26] Effects of Mo surface oxidation on Cu(In, Ga)Se2 solar cells fabricated by three-stage process with KF postdeposition treatment
Kamikawa, Yukiko
Nishinaga, Jiro
Ishizuka, Shogo
Shibata, Hajime
Niki, Shigeru
JAPANESE JOURNAL OF APPLIED PHYSICS, 2016, 55 (02)
[27] Growth and properties of epitaxial Cu(In, Ga)Se2 thin films deposited by the three-stage process for solar cells
Yamagami, Takeru
Ando, Yuta
Khatri, Ishwor
Sugiyama, Mutsumi
Nakada, Tokio
2017 IEEE 44TH PHOTOVOLTAIC SPECIALIST CONFERENCE (PVSC), 2017, : 192 - 194
[28] Investigation of Cu(In,Ga)Se2 thin-film formation during the multi-stage co-evaporation process
Caballero, R.
Kaufmann, C. A.
Efimova, V.
Rissom, T.
Hoffmann, V.
Schock, H. W.
PROGRESS IN PHOTOVOLTAICS, 2013, 21 (01): : 30 - 46
[29] Influence of Substrate Temperature on Cu2ZnSnSe4 Thin Film Solar Cells Fabricated by Co-evaporation Process
Sun D.
Li Y.-L.
Wang L.-Q.
Zhang Y.-H.
Liu H.
Guo X.-J.
Chi Y.-D.
Zhang L.
Faguang Xuebao/Chinese Journal of Luminescence, 2019, 40 (03): : 334 - 339
[30] Examination of a Cu-Deficient Layer on Cu(In, Ga)Se2 Films Fabricated by a Three-Stage Process for Highly Efficient Solar Cells
Nishimura, Takahito
Nakada, Kazuyoshi
Yamada, Akira
ACS APPLIED ENERGY MATERIALS, 2019, 2 (07): : 5103 - 5108

← 1 2 3 4 5 →