Application of goal programming technique for Electro Discharge Machining (EDM) characteristics of cemented carbide (WC/Co)

被引：1

作者：

Kanagarajan, D. ^{[2
]}

Karthikeyan, R. ^{[2
]}

Palanikumar, K. ^{[1
]}

Davim, J. Paulo ^{[3
]}

机构：

[1] Sri Sairam Inst Technol, Madras 600044, Tamil Nadu, India

[2] Annamalai Univ, Dept Mfg Engn, Annamalainagar 608002, Tamil Nadu, India

[3] Univ Aveiro, Dept Mech Engn, P-3810193 Aveiro, Portugal

来源：

INTERNATIONAL JOURNAL OF MATERIALS & PRODUCT TECHNOLOGY | 2009年 / 35卷 / 1-2期

关键词：

WC/Co cemented carbide; EDM; electro discharge machining; multi objective optimisation; goal programming; genetic algorithm; PARAMETERS;

D O I：

10.1504/IJMPT.2009.025228

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Tungsten carbide/Cobalt (WC/Co) cemented carbide is one of the important composite materials which is used for manufacturing cutting tools, dies and other special tools. WC/Co cemented carbide produced through powder metallurgy is subjected to Electro Discharge Machining. The process characteristics such as Material Removal Rate, Tool Wear Rate and Surface Roughness are studied by varying speed of electrode rotation, pulse current, pulse on time and dielectric flushing pressure. The experimental results are used to develop non-linear regression models for the process characteristics. A non-linear Goal programming based on Genetic Algorithm is used to optimise the processing conditions.

引用

页码：216 / 227

页数：12

共 50 条

[31] Experimental Investigation on Wire-Electro Discharge Machining of Tungsten Carbide (WC) using Response Surface Methodology (RSM)
Srinivasan, V. P.
Palani, P. K.
JOURNAL OF NEW MATERIALS FOR ELECTROCHEMICAL SYSTEMS, 2019, 22 (03) : 155 - 158
[32] Synthesis of WC composite powder with nano-cobalt coatings and its application in WC-4Co cemented carbide
He, Rengui
Wang, Jianying
He, Meng
Yang, Hailin
Ruan, Jianming
CERAMICS INTERNATIONAL, 2018, 44 (09) : 10961 - 10967
[33] Tribological characteristics of conventionally sintered TiCN-WC-Ni/Co cermets against cemented carbide
Verma, Vikas
Kumar, B. V. Manoj
CERAMICS INTERNATIONAL, 2017, 43 (01) : 368 - 375
[34] Comparative study on discharge conditions in micro-hole electrical discharge machining of tungsten carbide (WC-Co) material
Tak, Hyun-Seok
Ha, Chang-Seung
Kim, Dong-Hyun
Lee, Ho-Jun
Lee, Hae-June
Kang, Myung-Chang
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2009, 19 : S114 - S118
[35] Comparative study on discharge conditions in micro-hole electrical discharge machining of tungsten carbide (WC-Co) material
Hyun-Seok TAK
Chang-Seung HA
Dong-Hyun KIM
Ho-Jun LEE
Hae-June LEE
Myung-Chang KANG
Transactions of Nonferrous Metals Society of China, 2009, 19(S1) (S1) : 114 - 118
[36] Influence of wire-EDM on high temperature sliding wear behavior of WC10Co(Cr/V) cemented carbide
Delgado, Y. Perez
De Baets, P.
Bonny, K.
Olalla, V. Carretero
Vleugels, J.
Lawers, B.
Staia, M. H.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2013, 41 : 198 - 209
[37] Study on the Effects of Cryogenic Treatment on WC-Co Cemented Carbide at Different Scales Using an Indentation Technique
Premjarunan, Suparoj
Tuchinda, Karuna
Worasaen, Kaweewat
METALS, 2025, 15 (03)
[38] A TECHNIQUE AND ITS APPLICATION FOR EVALUATION OF MATERIAL REMOVAL CONTRIBUTIONS OF PULSES IN ELECTRIC-DISCHARGE MACHINING (EDM)
COGUN, C
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 1990, 30 (01): : 19 - 31
[39] Parametric study along with selection of optimal solutions in dry wire cut machining of cemented tungsten carbide (WC-Co)
Shayan, Ali Vazini
Afza, Reza Azar
Teimouri, Reza
JOURNAL OF MANUFACTURING PROCESSES, 2013, 15 (04) : 644 - 658
[40] Preparation, properties and microstructure of high hardness WC-Co cemented carbide tool materials for ultra-precision machining
Tang, Xiongqiu
Wang, Zhenhua
Huang, Lei
Wang, Xinzheng
Chang, Tianxiao
Huang, Peng
Zhu, Zhiwei
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2023, 116

← 1 2 3 4 5 →