Application of goal programming technique for Electro Discharge Machining (EDM) characteristics of cemented carbide (WC/Co)

被引：1
|
作者：
Kanagarajan, D. [2 ]
Karthikeyan, R. [2 ]
Palanikumar, K. [1 ]
Davim, J. Paulo [3 ]
机构：
[1] Sri Sairam Inst Technol, Madras 600044, Tamil Nadu, India
[2] Annamalai Univ, Dept Mfg Engn, Annamalainagar 608002, Tamil Nadu, India
[3] Univ Aveiro, Dept Mech Engn, P-3810193 Aveiro, Portugal
来源：
INTERNATIONAL JOURNAL OF MATERIALS & PRODUCT TECHNOLOGY | 2009年 / 35卷 / 1-2期
关键词：
WC/Co cemented carbide; EDM; electro discharge machining; multi objective optimisation; goal programming; genetic algorithm; PARAMETERS;
D O I：
10.1504/IJMPT.2009.025228
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Tungsten carbide/Cobalt (WC/Co) cemented carbide is one of the important composite materials which is used for manufacturing cutting tools, dies and other special tools. WC/Co cemented carbide produced through powder metallurgy is subjected to Electro Discharge Machining. The process characteristics such as Material Removal Rate, Tool Wear Rate and Surface Roughness are studied by varying speed of electrode rotation, pulse current, pulse on time and dielectric flushing pressure. The experimental results are used to develop non-linear regression models for the process characteristics. A non-linear Goal programming based on Genetic Algorithm is used to optimise the processing conditions.
引用
收藏
页码：216 / 227
页数：12
相关论文
共 50 条
  • [1] Influence of EDM on the wear characteristics of WC-Co cemented carbide
    Ishikawa, K
    Iwabuchi, A
    Shimizu, T
    JOURNAL OF JAPANESE SOCIETY OF TRIBOLOGISTS, 2003, 48 (11) : 928 - 935
  • [2] Influence of EDM on the wear characteristics of WC-Co cemented carbide
    Ishikawa, Kaneto
    Iwabuchi, Akira
    Shimizu, Tomoharu
    2003, Japanese Society of Tribologists (48):
  • [3] Electrical discharge machining (EDM) characteristics associated with electrical discharge energy on machining of cemented tungsten carbide
    Lin, Yan-Cherng
    Chen, Yuan-Feng
    Lin, Ching-Tien
    Tzeng, Hsinn-Jyh
    MATERIALS AND MANUFACTURING PROCESSES, 2008, 23 (3-4) : 391 - 399
  • [4] Some study on electrical discharge machining of ({WC+TiC+TaC/NbC}–Co) cemented carbide
    Simul Banerjee
    Debasish Mahapatro
    Shishir Dubey
    The International Journal of Advanced Manufacturing Technology, 2009, 43 : 1177 - 1188
  • [5] Effect of ultrasonic vibration of tool on electrical discharge machining of cemented tungsten carbide (WC-Co)
    Amir Abdullah
    Mohammad R. Shabgard
    The International Journal of Advanced Manufacturing Technology, 2008, 38 : 1137 - 1147
  • [6] Effect of ultrasonic vibration of tool on electrical discharge machining of cemented tungsten carbide (WC-Co)
    Abdullah, Amir
    Shabgard, Mohammad R.
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2008, 38 (11-12): : 1137 - 1147
  • [7] Mathematical modelling and comparative study of the machining characteristics in ultrasonic-assisted electrical discharge machining of cemented tungsten carbide (WC-10%Co)
    Shabgard, M. R.
    Farahmand, M. R.
    Ivanov, A.
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2009, 223 (09) : 1115 - 1126
  • [8] Some study on electrical discharge machining of ({WC plus TiC plus TaC/NbC}-Co) cemented carbide
    Banerjee, Simul
    Mahapatro, Debasish
    Dubey, Shishir
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2009, 43 (11-12): : 1177 - 1188
  • [9] Influence of electrical discharge machining on sliding friction and wear of WC-Ni cemented carbide
    Bonny, K.
    De Baets, P.
    Van Wittenberghe, J.
    Delgado, Y. Perez
    Vleugels, J.
    Van der Biest, O.
    Lauwers, B.
    TRIBOLOGY INTERNATIONAL, 2010, 43 (12) : 2333 - 2344
  • [10] Effect of Crystallinity of WC on Microstructure, Properties, and Application of WC-Co Cemented Carbide
    Zhanjiang Zhongnan Xiang
    Hongbo Li
    Fa Nie
    Pinqiang Chang
    Journal of Superhard Materials, 2021, 43 : 21 - 30
12345