Effect of ball milling on graphene reinforced Al6061 composite fabricated by semi-solid sintering

被引：351
|
作者：
Bastwros, Mina [1 ]
Kim, Gap-Yong [1 ]
Zhu, Can [1 ]
Zhang, Kun [2 ]
Wang, Shiren [2 ]
Tang, Xiaoduan [1 ]
Wang, Xinwei [1 ]
机构：
[1] Iowa State Univ, Dept Mech Engn, Ames, IA 50011 USA
[2] Texas Tech Univ, Dept Ind Engn, Lubbock, TX 79409 USA
来源：
COMPOSITES PART B-ENGINEERING | 2014年 / 60卷
基金：
美国国家科学基金会;
关键词：
Metal-matrix composites (MMCs); Particle-reinforcement; Microstructures; Sintering; WALLED CARBON NANOTUBES; ALUMINUM-MATRIX COMPOSITES; MECHANICAL-PROPERTIES; THERMAL-PROPERTIES; POWDER-METALLURGY; WEAR; BEHAVIOR; DISPERSION; STRENGTH; FRICTION;
D O I：
10.1016/j.compositesb.2013.12.043
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
A 1.0 wt.% graphene reinforced aluminum 6061 (Al6061) composite was synthesized to investigate the effects of graphene dispersion by ball milling technique. The Al6061 powder and graphene were ball milled at different milling times. The composites were then synthesized by hot compaction in the semi-solid regime of the Al6061. A three point bending test was performed to characterize the mechanical properties of the composite. The ball milled powder and the fracture surfaces of the composites were analyzed using the scanning electron microscopy. A maximum enhancement of 47% in flexural strength was observed when compared with the reference Al6061 processed at the same condition. (C) 2013 Elsevier Ltd. All rights reserved.
引用
收藏
页码：111 / 118
页数：8
相关论文
共 50 条
  • [11] Sintering Behavior of CNT Reinforced Al6061 and Al2124 Nanocomposites
    Saheb, Nouari
    ADVANCES IN MATERIALS SCIENCE AND ENGINEERING, 2014, 2014
  • [12] Carbon nanotube reinforced aluminum composite fabricated by semi-solid powder processing
    Wu, Yufeng
    Kim, Gap-Yong
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2011, 211 (08) : 1341 - 1347
  • [13] Rheological behavior of semi-solid TiB2 reinforced Al composite
    Thadela, S.
    Mandal, B.
    Das, P.
    Roy, H.
    Lohar, A. K.
    Samanta, S. K.
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2015, 25 (09) : 2827 - 2832
  • [14] Development of short fiber-reinforced NiTi/Al6061 composite
    Xie, C. L.
    Hailat, M.
    Wu, X.
    Newaz, G.
    Taya, M.
    Raju, B.
    JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME, 2007, 129 (01): : 69 - 76
  • [15] Effect of intermetallic compound on the Al-Mg composite materials fabricated by mechanical ball milling and spark plasma sintering
    Park, Kwangjae
    Park, Jehong
    Kwon, Hansang
    JOURNAL OF ALLOYS AND COMPOUNDS, 2018, 739 : 311 - 318
  • [16] Interface of a Al6061/Ti Composite Prepared by Field Assisted Sintering Technique
    Kozlik, Jiri
    Vesely, Jozef
    Strasky, Josef
    Chraska, Tomas
    Janecek, Milos
    METALS, 2021, 11 (01) : 1 - 12
  • [17] Effect of Milling on the Hardness and Wear Behaviour of Cast Al6061 Reinforced with Al2O3 Nanoparticles
    Ravikumar K.S.
    Ghanaraja S.
    Ramesh M.R.
    Journal of Bio- and Tribo-Corrosion, 2022, 8 (01)
  • [18] Al6061 Hybrid Metal Matrix Composite Reinforced with Alumina and Molybdenum Disulphide
    Pitchayyapillai, G.
    Seenikannan, P.
    Raja, K.
    Chandrasekaran, K.
    ADVANCES IN MATERIALS SCIENCE AND ENGINEERING, 2016, 2016
  • [19] FABRICATION OF AL6061-CNT COMPOSITE BY MECHANICAL ALLOYING FOLLOWED BY SEMI-SOLID POWDER PROCESSING
    Wu, Yufeng
    Kim, Gap-Yong
    PROCEEDINGS OF THE ASME INTERNATIONAL MANUFACTURING SCIENCE AND ENGINEERING CONFERENCE 2010, VOL 2, 2011, : 399 - 403
  • [20] Effect of graphene nanoplatelets on the physical and mechanical properties of Al6061 in fabricated and T6 thermal conditions
    Khan, Mahmood
    Din, Rafi Ud
    Wadood, Abdul
    Syed, Wilayat Husain
    Akhtar, Shahid
    Aune, Ragnhild Elizabeth
    JOURNAL OF ALLOYS AND COMPOUNDS, 2019, 790 : 1076 - 1091
12345