Effect of ball milling on graphene reinforced Al6061 composite fabricated by semi-solid sintering

被引：351
|
作者：
Bastwros, Mina [1 ]
Kim, Gap-Yong [1 ]
Zhu, Can [1 ]
Zhang, Kun [2 ]
Wang, Shiren [2 ]
Tang, Xiaoduan [1 ]
Wang, Xinwei [1 ]
机构：
[1] Iowa State Univ, Dept Mech Engn, Ames, IA 50011 USA
[2] Texas Tech Univ, Dept Ind Engn, Lubbock, TX 79409 USA
来源：
COMPOSITES PART B-ENGINEERING | 2014年 / 60卷
基金：
美国国家科学基金会;
关键词：
Metal-matrix composites (MMCs); Particle-reinforcement; Microstructures; Sintering; WALLED CARBON NANOTUBES; ALUMINUM-MATRIX COMPOSITES; MECHANICAL-PROPERTIES; THERMAL-PROPERTIES; POWDER-METALLURGY; WEAR; BEHAVIOR; DISPERSION; STRENGTH; FRICTION;
D O I：
10.1016/j.compositesb.2013.12.043
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
A 1.0 wt.% graphene reinforced aluminum 6061 (Al6061) composite was synthesized to investigate the effects of graphene dispersion by ball milling technique. The Al6061 powder and graphene were ball milled at different milling times. The composites were then synthesized by hot compaction in the semi-solid regime of the Al6061. A three point bending test was performed to characterize the mechanical properties of the composite. The ball milled powder and the fracture surfaces of the composites were analyzed using the scanning electron microscopy. A maximum enhancement of 47% in flexural strength was observed when compared with the reference Al6061 processed at the same condition. (C) 2013 Elsevier Ltd. All rights reserved.
引用
收藏
页码：111 / 118
页数：8
相关论文
共 50 条
  • [1] EFFECT OF MECHANICAL ALLOYING ON AL6061-GRAPHENE COMPOSITE FABRICATED BY SEMI-SOLID POWDER PROCESSING
    Bastwros, Mina
    Kim, Gap-Yong
    Zhu, Can
    Zhang, Kun
    Wang, Shiren
    PROCEEDINGS OF THE ASME 8TH INTERNATIONAL MANUFACTURING SCIENCE AND ENGINEERING CONFERENCE - 2013, VOL 2, 2013,
  • [2] Compaction behavior of Al6061 powder in the semi-solid state
    Wu, Yufeng
    Kim, Gap-Yong
    POWDER TECHNOLOGY, 2011, 214 (02) : 252 - 258
  • [3] Study on ultrasonic bonding characteristics of semi-solid Al6061
    Li, Hao
    Zhang, Qi
    Cao, Miao
    Liang, Zhenglong
    WELDING IN THE WORLD, 2021, 65 (12) : 2383 - 2395
  • [4] Study on ultrasonic bonding characteristics of semi-solid Al6061
    Hao Li
    Qi Zhang
    Miao Cao
    Zhenglong Liang
    Welding in the World, 2021, 65 : 2383 - 2395
  • [5] Fabrication of Al6061 composite with high SiC particle loading by semi-solid powder processing
    Wu, Yufeng
    Kim, Gap-Yong
    Anderson, Iver E.
    Lograsso, Thomas A.
    ACTA MATERIALIA, 2010, 58 (13) : 4398 - 4405
  • [6] Effect of hot extrusion temperature on graphene nanoplatelets reinforced Al6061 composite fabricated by pressure infiltration method
    Shao, Puzhen
    Chen, Guoqin
    Ju, Boyu
    Yang, Wenshu
    Zhang, Qiang
    Wang, Zhijun
    Tan, Xin
    Pei, Yinyin
    Zhong, Sujuan
    Hussain, Murid
    Wu, Gaohui
    CARBON, 2020, 162 : 455 - 464
  • [7] Effects of mechanical alloying on an Al6061-CNT composite fabricated by semi-solid powder processing
    Wu, Yufeng
    Kim, Gap-Yong
    Russell, Alan M.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2012, 538 : 164 - 172
  • [8] Effect of ball milling time on graphene nanosheets reinforced Al6063 composite fabricated by pressure infiltration method
    Yu, Zhenhe
    Yang, Wenshu
    Zhou, Chang
    Zhang, Ningbo
    Chao, Zhenlong
    Liu, Hao
    Cao, Youfang
    Sun, Yue
    Shao, Puzhen
    Wu, Gaohui
    CARBON, 2019, 141 (25-39) : 25 - 39
  • [9] Establishment of macro-micro constitutive model and deformation mechanism of semi-solid Al6061
    Li, Hao
    Cao, Miao
    Niu, Liqun
    Huang, Ke
    Zhang, Qi
    JOURNAL OF ALLOYS AND COMPOUNDS, 2021, 854
  • [10] GNP-Reinforced Al2024 Composite Fabricated through Powder Semi-Solid Processing
    Chen, Lili
    Qi, Yushi
    Fei, Yanhan
    Liu, Yongwang
    Du, Zhiming
    MATERIALS TRANSACTIONS, 2020, 61 (07) : 1239 - 1246
12345