Mechanical Properties of Porous Si3N4 Ceramics

被引：1
|
作者：
Kasiarova, Monika [1 ]
Vilcekova, Zuzana [1 ]
Bodisova, Katarina [2 ]
Domanicka, Magdalena [2 ]
Hnatko, Miroslav [2 ]
Dusza, Jan [1 ]
Sajgalik, Pavol [2 ]
Gromosova, Sylvia [3 ,4 ]
机构：
[1] Slovak Acad Sci, Inst Mat Res, Watsonova 47, Kosice, Slovakia
[2] Slovak Acad Sci, Inst Inorgan Chem, Kosice, Slovakia
[3] Safarik Univ, Fac Med, Associated Tissue Bank, Kosice, Slovakia
[4] L Pasteur Fac Hosp, Fac Med, Kosice, Slovakia
来源：
LOCAL MECHANICAL PROPERTIES IX | 2014年 / 586卷
关键词：
silicon nitride; porous ceramics; nanohardness; elastic modulus; trabecular bone; ELASTIC-MODULUS; NANOINDENTATION; INDENTATION; HARDNESS; LOAD;
D O I：
10.4028/www.scientific.net/KEM.586.166
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Mechanical properties of porous silicon nitride prepared by two different processing routes have been studied. Depth sensing indentation was used to measure the hardness and Young's modulus of experimental materials. The results were compared with the hardness and Young's modulus of trabecular bone in order to find out porous ceramics with properties close to that of trabecular bone. Material prepared by the infiltration of polyurethane sponge exhibited properties close to the properties of bone and it is potential material for further investigation in the bio-application field.
引用
收藏
页码：166 / +
页数：2
相关论文
共 50 条
  • [31] Dielectric and mechanical properties of porous Si3N4 ceramics prepared via low temperature sintering
    Xia, Yongfeng
    Zeng, Yu-Ping
    Jiang, Dongliang
    CERAMICS INTERNATIONAL, 2009, 35 (04) : 1699 - 1703
  • [32] Fabrication, mechanical properties and thermal shock resistance of a dense SiC NWs/α-Si3N4 composite coating for protecting porous Si3N4 ceramics
    Wang, Binglei
    Shangguan, Duandan
    Qiao, Ruiqing
    Zhang, Fan
    Bai, Yu
    Wang, Zhanjie
    Wang, Chao
    Lu, Xuefeng
    CERAMICS INTERNATIONAL, 2019, 45 (17) : 23241 - 23247
  • [33] Mechanical properties of Si3N4 ceramics from an in-situ synthesized a-Si3N4/β-Si3N4 composite powder
    Xing, Hongyu
    Liu, Bingqiang
    Sun, Jing
    Zou, Bin
    CERAMICS INTERNATIONAL, 2017, 43 (02) : 2150 - 2154
  • [34] Preparation and Properties of Micro-porous Si3N4 Ceramics by Gelcasting
    Yu Juanli
    Yang Jinlong
    Wang Hongjie
    RARE METAL MATERIALS AND ENGINEERING, 2012, 41 : 349 - 353
  • [35] Characterization and properties of rapid fabrication of network porous Si3N4 ceramics
    Li, Bin
    Jiang, Peng
    Yan, Ming-Wei
    Li, Yong
    Hou, Xin-Mei
    Chen, Jun-Hong
    JOURNAL OF ALLOYS AND COMPOUNDS, 2017, 709 : 717 - 723
  • [36] Preparation and Properties of Pressureless-Sintered Porous Si3N4 Ceramics
    Lin, Xiao
    Shi, Jinming
    Gong, Hongyu
    Zhang, Yujun
    Feng, Yurun
    Guo, Xue
    Xie, Bingying
    Liu, Yu
    Wei, Jiajun
    ADVANCED FUNCTIONAL MATERIALS (CMC 2017), 2018, : 93 - 100
  • [37] Dependence of mechanical properties of SiC whisker/Si3N4 composite ceramics on crystal type of Si3N4 powders
    Cho, Won Seung
    Hayashi, Koji
    Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy, 1994, 41 (01): : 48 - 52
  • [38] Effect of the residual phases in β-Si3N4 seed on the mechanical properties of self-reinforced Si3N4 ceramics
    Dai, JH
    Li, JB
    Chen, YJ
    Yang, L
    JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2003, 23 (09) : 1543 - 1547
  • [39] Porous Si3N4 Ceramics Prepared via Nitridation of Si Powder with Si3N4 Filler and Postsintering
    Yao, Dongxu
    Zeng, Yu-Ping
    Zuo, Kai-hui
    Jiang, Dongliang
    INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY, 2012, 9 (02) : 239 - 245
  • [40] Effects of Ti(C,N) nanoparticles on Mechanical Properties of the Si3N4 ceramics
    Li, Qian
    Zhu, Fusheng
    Xiu, Zhimeng
    Sun, Xudong
    INFORMATION ENGINEERING FOR MECHANICS AND MATERIALS SCIENCE, PTS 1 AND 2, 2011, 80-81 : 119 - 122
12345