Effects of Plasma Aerodynamic Actuation on Corner Separation in a Highly Loaded Compressor Cascade

被引:7
|
作者
Wang Xuede [1 ]
Zhao Xiaohu [1 ]
Li Yinghong [1 ]
Wu Yun [1 ]
Zhao Qin [1 ]
机构
[1] Air Force Engn Univ, Sci & Technol Plasma Dynam Lab, Xian 710038, Peoples R China
基金
中国国家自然科学基金;
关键词
plasma aerodynamic actuation; corner separation; compressor; cascade;
D O I
10.1088/1009-0630/16/3/13
中图分类号
O35 [流体力学]; O53 [等离子体物理学];
学科分类号
070204 ; 080103 ; 080704 ;
摘要
This paper reports experimental results on the effects of plasma aerodynamic actuation (PAA) on corner separation control in a highly loaded, low speed, linear compressor cascade. Total pressure loss coefficient distribution was adopted to evaluate the corner separation control effect in wind tunnel experiments. Results of pressure measurements and particle image velocimetry (PIV) show that the control effect of pitch-wise PAA on the endwall is much better than that of stream-wise PAA on the suction surface. When both the pitch-wise PAA on the endwall and stream-wise PAA on the suction surface are turned on simultaneously, the control effect is the best among all three PAA types. The mechanisms of nanosecond discharge and microsecond discharge PAA are different in corner separation control. The control effect of microsecond discharge PAA turns out better with the increase of discharge voltage and duty cycle. Compared with microsecond discharge PAA, nanosecond discharge PAA is more effective in preventing corner separation when the freestream velocity increases. Frequency is one of the most important parameters in plasma flow control. The optimum excitation frequency of microsecond discharge PAA is 500 Hz, which is different from the frequency corresponding to the case with a Strouhal number of unity.
引用
收藏
页码:244 / 250
页数:7
相关论文
共 50 条
  • [31] Active Control of the Corner Separation on a Highly Loaded Compressor Cascade With Periodic Nonsteady Boundary Conditions by Means of Fluidic Actuators
    Staats, Marcel
    Nitsche, Wolfgang
    JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME, 2016, 138 (03):
  • [32] Control of corner separation via dimpled surface for a highly loaded compressor cascade under different inlet Mach number
    Lu, Huawei
    Yang, Yi
    Guo, Shuang
    Pang, Wenxuan
    Yang, Fan
    Zhong, Jingjun
    AEROSPACE SCIENCE AND TECHNOLOGY, 2019, 85 : 48 - 60
  • [33] Intermittent corner separation in a linear compressor cascade
    Wei, Ma
    Xavier, Ottavy
    Lipeng, Lu
    Francis, Leboeuf
    EXPERIMENTS IN FLUIDS, 2013, 54 (06)
  • [34] CORNER SEPARATION DYNAMICS IN A LINEAR COMPRESSOR CASCADE
    Zambonini, Gherardo
    Ottavy, Xavief
    Kriegseis, Jochen
    PROCEEDINGS OF THE ASME TURBO EXPO: TURBINE TECHNICAL CONFERENCE AND EXPOSITION, 2016, VOL 2D, 2016,
  • [35] Corner Separation Dynamics in a Linear Compressor Cascade
    Zambonini, Gherardo
    Ottavy, Xavier
    Kriegseis, Jochen
    JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME, 2017, 139 (06):
  • [36] Intermittent corner separation in a linear compressor cascade
    Ma Wei
    Ottavy Xavier
    Lu Lipeng
    Leboeuf Francis
    Experiments in Fluids, 2013, 54
  • [37] Numerical Investigation of Corner Separation on Compressor Cascade
    Ling, Jing
    Du, Xin
    Wang, Songtao
    Wang, Zhongqi
    PROCEEDINGS OF THE ASME TURBO EXPO: TURBINE TECHNICAL CONFERENCE AND EXPOSITION, 2013, VOL 6A, 2013,
  • [38] Investigation of control effects of end-wall self-adaptive jet on three-dimensional corner separation of a highly loaded compressor cascade
    Hejian WANG
    Bo LIU
    Xiaochen MAO
    Botao ZHANG
    Zonghao YANG
    Chinese Journal of Aeronautics, 2024, 37 (06) : 109 - 126
  • [39] Investigation of control effects of end-wall self-adaptive jet on three-dimensional corner separation of a highly loaded compressor cascade
    Wang, Hejian
    Liu, Bo
    Mao, Xiaochen
    Zhang, Botao
    Yang, Zonghao
    CHINESE JOURNAL OF AERONAUTICS, 2024, 37 (06) : 109 - 126
  • [40] Flow separation characteristics of rectangular cascade for a highly-loaded helium compressor
    Chen, Zhongliang
    Zheng, Qun
    Jiang, Bin
    Chen, Hang
    Harbin Gongcheng Daxue Xuebao/Journal of Harbin Engineering University, 2015, 36 (03): : 343 - 347