Enhancement of thermal properties of polyacrylonitrile by reinforcement of Mg-Al layered double hydroxide

被引:12
|
作者
Barik, Sunita [1 ]
Kisku, Sudhir K. [2 ]
Behera, Lingaraj [1 ]
Swain, Sarat K. [2 ]
机构
[1] North Orissa Univ, Dept Chem, Baripada 757003, Odisha, India
[2] Veer Surendra Sai Univ Technol, Dept Chem, Sambalpur 768018, Odisha, India
关键词
MELT-INTERCALATION; NANOCOMPOSITES; DELAMINATION;
D O I
10.1002/pc.23130
中图分类号
TB33 [复合材料];
学科分类号
摘要
The in situ polymerization technique was used for synthesis of polyacrylonitrile nanocomposites (PAN/LDH) by reinforcement of different concentrations of Mg-Al layered double hydroxide (LDH). Molecular interaction between Mg/Al LDH and PAN matrix was studied by Fourier transform infrared spectroscopy. The morphology of PAN/LDH nanocomposite was investigated by field emission scanning electron microscopy. Energy dispersive spectroscopy of nanocomposites were noticed to establish the elemental composition of the composite. High resolution transmission electron microscopy was used to study the nanostructural distribution of LDH with PAN matrix, whereas crystalline patterns were explained by selected area electron diffraction studies. The thermal properties of nanocomposites were studied by thermo-gravimetric analysis. It was found that, the thermal property of PAN was substantially enhanced due to strong interfacial adhesion of Mg-Al-LDH with PAN matrix. Further, it was noticed that the thermal stability of PAN/LDH nanocomposites were increased with increasing concentration of LDH. (c) 2014 Society of Plastics Engineer
引用
收藏
页码:2140 / 2144
页数:5
相关论文
共 50 条
  • [41] Corrosion Resistance of Superhydrophobic Mg-Al Layered Double Hydroxide Coatings on Aluminum Alloys
    Fen Zhang
    Chang-Lei Zhang
    Liang Song
    Rong-Chang Zeng
    Lan-Yue Cui
    Hong-Zhi Cui
    ActaMetallurgicaSinica(EnglishLetters), 2015, 28 (11) : 1373 - 1381
  • [42] Morphology and fracture behaviour of polyethylene/Mg-Al layered double hydroxide (LDH) nanocomposites
    Costa, F. R.
    Satapathy, B. K.
    Wagenknecht, U.
    Weidisch, R.
    Heinrich, G.
    EUROPEAN POLYMER JOURNAL, 2006, 42 (09) : 2140 - 2152
  • [43] Evaluation of ionic conductivity for Mg-Al layered double hydroxide intercalated with inorganic anions
    Furukawa, Yoshihiro
    Tadanaga, Kiyoharu
    Hayashi, Akitoshi
    Tatsumisago, Masahiro
    SOLID STATE IONICS, 2011, 192 (01) : 185 - 187
  • [44] Pulsed laser deposition of functionalized Mg-Al layered double hydroxide thin films
    Vlad, A.
    Birjega, R.
    Tirca, I.
    Matei, A.
    Mardare, C. C.
    Hassel, A. W.
    Nedelcea, A.
    Dinescu, M.
    Zavoianu, R.
    APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING, 2018, 124 (02):
  • [45] Intercalation of amino acids and peptides into Mg-Al layered double hydroxide by reconstruction method
    Nakayama, H
    Wada, N
    Tsuhako, M
    INTERNATIONAL JOURNAL OF PHARMACEUTICS, 2004, 269 (02) : 469 - 478
  • [46] Pure Mg-Al Layered Double Hydroxide Film on Magnesium Alloys for Orthopedic Applications
    Cheng, Shi
    Lan, Lvqin
    Li, Mei
    Chu, Xiao
    Zhong, Hua
    Yao, Mengyu
    Peng, Feng
    Zhang, Yu
    ACS OMEGA, 2021, 6 (38): : 24575 - 24584
  • [47] Evaluation of mechanical properties of Mg-Al layered double hydroxide as a filler in epoxy-based FML composites
    K. Logesh
    V. K. Bupesh Raja
    The International Journal of Advanced Manufacturing Technology, 2019, 104 : 3267 - 3285
  • [48] Hydrophobic Mg-Al layered double hydroxide film on aluminum: Fabrication and microbiologically influenced corrosion resistance properties
    Wang, Yi
    Zhang, Dun
    Lu, Zhou
    COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS, 2015, 474 : 44 - 51
  • [49] Evaluation of mechanical properties of Mg-Al layered double hydroxide as a filler in epoxy-based FML composites
    Logesh, K.
    Raja, V. K. Bupesh
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2019, 104 (9-12): : 3267 - 3285
  • [50] THERMAL-CONVERSION OF A LAYERED (MG/AL) DOUBLE HYDROXIDE TO THE OXIDE
    HUDSON, MJ
    CARLINO, S
    APPERLEY, DC
    JOURNAL OF MATERIALS CHEMISTRY, 1995, 5 (02) : 323 - 329