The effect of NiTi shape memory alloy, polypropylene and steel fibres on the fresh and mechanical properties of self-compacting concrete

被引：44

作者：

Aslani, Farhad ^{[1
,2
]}

Liu, Yinong ^{[1
]}

Wang, Yu ^{[1
]}

机构：

[1] Univ Western Australia, Mat & Struct Innovat Grp, Sch Engn, Perth, WA 6009, Australia

[2] Edith Cowan Univ, Sch Engn, Joondalup, WA 6027, Australia

来源：

CONSTRUCTION AND BUILDING MATERIALS | 2019年 / 215卷

关键词：

Self-compacting concrete; Shape memory alloy fibres; Steel fibres; Polypropylene fibres; Fibre-reinforced concrete; Fresh properties; Mechanical properties; Impact test; REINFORCED-CONCRETE; BEHAVIOR; BEAMS; COMPOSITES; WIRES;

D O I：

10.1016/j.conbuildmat.2019.04.207

中图分类号：

TU [建筑科学];

学科分类号：

0813 ;

摘要：

Self-compacting concrete (SCC) is the main cementitious material employed in modern constructions, because of its outstanding deformability and high resistance to segregation. In this study, a new nickel-titanium (NiTi) shape memory alloy (SMA) fibre was manufactured to investigate its effects on the fresh and mechanical properties of SMA fibre-reinforced SCC and comparing it with polypropylene (PP) fibre and steel fibre reinforced SCC. Fresh properties tests, including slump flow and J-ring, and mechanical properties tests, including compressive strength, splitting tensile strength, flexural strength and impact, were carried out. The SMA fibre-reinforced SCC displays outstanding fresh properties and ductile performance compared to the PP and steel fibre-reinforced SCC. This is because SMA fibres present outstanding ultimate tensile strength and superelastic characteristics. The combination of the advantages delays initial crack development and narrows the crack gap width, resulting in energy dissipation phenomena which enhance both ductile performance in mechanical experiments and dynamic resistance in impact loading. (C) 2019 Elsevier Ltd. All rights reserved.

引用

页码：644 / 659

页数：16

共 50 条

[21] Fresh and Mechanical Properties of High-Performance Self-Compacting Concrete Containing Ground Granulated Blast Furnace Slag and Polypropylene Fibres
Smarzewski, Piotr
APPLIED SCIENCES-BASEL, 2023, 13 (03):
[22] Fatigue performance of self-compacting concrete containing hybrid steel-polypropylene fibres
Bawa, S.
Singh, S. P.
INNOVATIVE INFRASTRUCTURE SOLUTIONS, 2019, 4 (01)
[23] Magnetic alignment of steel Fibres in self-compacting concrete
Ghailan, Dhia B.
Al-Ghalib, Ali A.
AUSTRALIAN JOURNAL OF STRUCTURAL ENGINEERING, 2020, 21 (01) : 333 - 341
[24] Properties of self-compacting lightweight concrete reinforced with steel and polypropylene fibers
Liu, Xi
Wu, Tao
Yang, Xue
Wei, Hui
CONSTRUCTION AND BUILDING MATERIALS, 2019, 226 : 388 - 398
[25] Enhancing the Properties of Self-Compacting Concrete by Using Steel and Polypropylene Fibers
Hussain, Athar
Wankhade, Rajan L.
Singh, Harpreet
PRACTICE PERIODICAL ON STRUCTURAL DESIGN AND CONSTRUCTION, 2024, 29 (03)
[26] The effect of fibres in the rheology of self-compacting concrete
Alberti, M. G.
Enfedaque, A.
Galvez, J. C.
CONSTRUCTION AND BUILDING MATERIALS, 2019, 219 : 144 - 153
[27] Fresh and Hardened Properties of Self-Compacting Concrete Reinforced with Hybrid Recycled Steel-Polypropylene Fiber
Mastali, M.
Dalvand, A.
JOURNAL OF MATERIALS IN CIVIL ENGINEERING, 2017, 29 (06)
[28] Engineering Properties of Self-Compacting Concrete Produced by Polypropylene and Steel Fiber
Karatas, Mehmet
Gunes, Abdulkadir
PERIODICA POLYTECHNICA-CIVIL ENGINEERING, 2015, 59 (02): : 95 - 102
[29] Effect of steel fibers on the properties of recycled self-compacting concrete in fresh and hardened state
Department of Civil Engineering, Menoufia University, Egypt
Int. J. Civ. Eng., 4A (400-410):
[30] Effect of steel fibers on the properties of recycled self-compacting concrete in fresh and hardened state
Kamal, M. M.
Safan, M. A.
Etman, Z. A.
Abd-elbaki, M. A.
INTERNATIONAL JOURNAL OF CIVIL ENGINEERING, 2015, 13 (4A) : 400 - 410

← 1 2 3 4 5 →