Seismic performance of RC bridge piers subjected to moderate earthquakes

被引:7
|
作者
Chung, Young Soo
Park, Chang Kyu
Lee, Dae Hyoung
机构
[1] Chung Ang Univ, Dept Civil Engn, Ansong 456756, South Korea
[2] Gyeong Do Provincial Coll, Dept Civil Engn, Yechonup 757807, South Korea
关键词
RC bridge pier; seismic damage; lap splice; retrofit; transverse confinement;
D O I
10.12989/sem.2006.24.4.429
中图分类号
TU [建筑科学];
学科分类号
0813 ;
摘要
Experimental investigation was conducted to evaluate the seismic ductility of earthquake-experienced concrete columns with an aspect ratio of 2.5. Eight circular concrete columns with a diameter of 600 mm were constructed with three test parameters: confinement ratio, lap-splice of longitudinal bars, and retrofitting with Fiber Reinforced Polymer (FRP) materials. The objective of this research is to examine the seismic performance of RC bridge piers subjected to a Quasi static test (QST), which were preliminary tested under a series of artificial earthquake motions referred to as a Pseudo dynamic test (PDT). The seismic enhancement effect of FRP wrap was also investigated on these RC bridge piers. Six specimens were loaded to induce probable damage by four series of artificial earthquakes, which were developed to be compatible with earthquakes in the Korean peninsula by the Korea Highway Corporation (KHC). Directly after the PDT, six earthquake-experienced columns were subjected to inelastic cyclic loading under a constant axial load of 0.1f(c)'A(g). Two other reference specimens without the PDT were also subjected to similar quasi-static loads. Test results showed that specimens pre-damaged by moderate artificial earthquakes generally demonstrated good residual seismic performance, which was similar to the corresponding reference specimen. Moreover, RC bridge specimens retrofitted with wrapping fiber composites in the potential plastic hinge region exhibited enhanced flexural ductility.
引用
收藏
页码:429 / 446
页数:18
相关论文
共 50 条
  • [31] Long-term seismic performance of RC structures in an aggressive environment: emphasis on bridge piers
    Akiyama, Mitsuyoshi
    Frangopol, Dan M.
    STRUCTURE AND INFRASTRUCTURE ENGINEERING, 2014, 10 (07) : 865 - 879
  • [32] Seismic performance of reinforced concrete bridge piers
    Kang, HD
    Rose, B
    Shing, PB
    Spacone, E
    Willam, KJ
    COMPUTATIONAL MODELLING OF CONCRETE STRUCTURES, VOLS 1 AND 2, 1998, : 673 - 683
  • [33] Seismic performance of corroded concrete bridge piers
    Fang, Congqi
    Yuan, Zhijie
    Yang, Shuai
    Zhang, Junmeng
    MAINTENANCE, MONITORING, SAFETY, RISK AND RESILIENCE OF BRIDGES AND BRIDGE NETWORKS, 2016, : 420 - 420
  • [34] Evaluation of earthquake deformation and performance for RC bridge piers
    Lee, DH
    Choi, E
    Zi, G
    ENGINEERING STRUCTURES, 2005, 27 (10) : 1451 - 1464
  • [35] Displacement-based seismic design method of RC bridge piers
    Wang, Dongsheng
    Li, Hongnan
    Zhao, Yinghua
    Wang, Guoxin
    Tumu Gongcheng Xuebao/China Civil Engineering Journal, 2006, 39 (10): : 80 - 86
  • [36] Experimental and numerical studies on the seismic response of RC hollow bridge piers
    Calvi, Gian Michele
    Pavese, Alberto
    Rasulo, Alessandro
    Bolognini, Davide
    BULLETIN OF EARTHQUAKE ENGINEERING, 2005, 3 (03) : 267 - 297
  • [37] A simplified procedure to evaluate seismic vulnerability of RC circular bridge piers
    Mezzina, M.
    Palmisano, F.
    Raffaele, D.
    BRIDGE MAINTENANCE, SAFETY, MANAGEMENT, RESILIENCE AND SUSTAINABILITY, 2012, : 3525 - 3532
  • [38] Seismic behavior of coupled column bridge RC piers: Experimental campaign
    Monteiro, A.
    Arede, A.
    Pouca, N. Vila
    ENGINEERING STRUCTURES, 2017, 132 : 399 - 412
  • [39] Maintenance strategy of deteriorating RC bridge piers in consideration of seismic risk
    Takahashi, Kazuya
    Fujii, Hisaya
    Furuta, Hitoshi
    Dogaki, Masahiro
    1600, Society of Materials Science Japan (63): : 110 - 116
  • [40] FRP seismic retrofit of RC square hollow section bridge piers
    Pavese, A
    Bolognini, D
    Peloso, S
    JOURNAL OF EARTHQUAKE ENGINEERING, 2004, 8 : 225 - 250