Modeling and optimal design of evaporative cooling system in controlled environment greenhouse

被引：84
|
作者：
Jain, DL [1 ]
Tiwari, GN [1 ]
机构：
[1] Indian Inst Technol, Ctr Energy Studies, New Delhi 110016, India
来源：
ENERGY CONVERSION AND MANAGEMENT | 2002年 / 43卷 / 16期
关键词：
greenhouse; controlled environment; solar energy; evaporative cooling;
D O I：
10.1016/S0196-8904(01)00151-0
中图分类号：
O414.1 [热力学];
学科分类号：
摘要：
This communication deals with the development of a mathematical model for experimental validation of the thermal behavior in the greenhouse after evaporative cooling. Extensive experiments have been performed during July to October 2000 for an even span greenhouse of effective floor area of 24 m(2) and having a brick north wall. A parametric study involves the area of the cooling pad (height of cooling pad and greenhouse), mass flow rate and length of greenhouse. The optimum value of various parameters has also been determined. A computer program based on MatLab software has been used to predict the temperature profile as a function of various design parameters. The predicted room temperature of various zones shows fair agreement with the experimental values. (C) 2002 Elsevier Science Ltd. All rights reserved.
引用
收藏
页码：2235 / 2250
页数：16
相关论文
共 50 条
  • [41] Improving the sustainability and effectiveness of photovoltaic evaporative cooling greenhouse in the Sahel
    Djibrilla, Alio Sanda M.
    Rabani, Adamou
    Illyassou, Karimoun M.
    Abdoulkader, Atto H.
    Aissetou, Drame Yaye
    SCIENTIFIC REPORTS, 2024, 14 (01):
  • [42] Evaluation of evaporative cooling effect on indoor environment
    Okamoto, Yuki
    Miyazaki, Hiroshi
    Technology Reports of Kansai University, 2015, (57): : 59 - 65
  • [43] SPRAY EVAPORATIVE COOLING SYSTEM DESIGN FOR AUTOMOTIVE INTERNAL COMBUSTION ENGINES
    Jose, Jisjoe T.
    Dunne, Julian F.
    Pirault, Jean-Pierre
    Long, Christopher A.
    PROCEEDINGS OF THE ASME INTERNAL COMBUSTION ENGINE FALL TECHNICAL CONFERENCE, 2018, VOL 2, 2019,
  • [44] Design of auto-control project in evaporative cooling airconditioning system
    Huang, X
    Qiang, TW
    Wu, JM
    Di, YH
    ENERGY AND ENVIRONMENT, VOLS 1 AND 2, 2003, : 1486 - 1490
  • [45] Optimal design of U-shaped evaporative cooling radiator for high frequency transformer
    Yang Zhangbin
    Huang, Kangjie
    Zhang Sixiang
    Bin Xiong
    Luo Daijun
    2022 25TH INTERNATIONAL CONFERENCE ON ELECTRICAL MACHINES AND SYSTEMS (ICEMS 2022), 2022,
  • [46] Energy Efficiency in Greenhouse Evaporative Cooling Techniques: Cooling Boxes versus Cellulose Pads
    Franco, Antonio
    Valera, Diego L.
    Pena, Araceli
    ENERGIES, 2014, 7 (03): : 1427 - 1447
  • [47] Novel modeling of an indirect evaporative cooling system with cross-flow configuration
    Heidarinejad, Ghassem
    Moshari, Shahab
    ENERGY AND BUILDINGS, 2015, 92 : 351 - 362
  • [48] Optimal design of cooling system for injection molding
    Tang, LQ
    Pochiraju, K
    Chassapis, C
    Manoochehri, S
    ANTEC '96: PLASTICS - RACING INTO THE FUTURE, VOLS I-III: VOL I: PROCESSING; VOL II: MATERIALS; VOL III: SPACIAL AREAS, 1996, 42 : 714 - 718
  • [49] An optimal design of cooling system for injection mold
    Liang, JZ
    POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING, 2002, 41 (02) : 261 - 271
  • [50] The Optimal Design of Injection Mold Cooling System
    Huang, Zhaoyang
    MECHATRONICS AND INTELLIGENT MATERIALS II, PTS 1-6, 2012, 490-495 : 2647 - 2651
12345