Precision milling of hardened steel with CBN tools

被引：8
|
作者：
Matras, Andrzej [1 ]
Zebala, Wojciech [1 ]
Kowalczyk, Robert [1 ]
机构：
[1] Cracow Univ Technol, PL-31864 Krakow, Poland
来源：
PRECISION MACHINING VII | 2014年 / 581卷
关键词：
milling; hardened steel; CBN; BALL; MACHINABILITY; LIFE;
D O I：
10.4028/www.scientific.net/KEM.581.182
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
The paper presents research of milling tool inclination angle 6 influence (in relation to the cutting surface) on the free form surface roughness. Rotational tools with curved cutting edges (ball nose cutter) performed translation movements on the spherical surface of hardened steel work piece (hardness of 50, 62 and 65 BRC). Milling tool with diameter d=1 mm was made of CBN. Roughness measurements were performed in different places of the milling surface with the Taylor Hobson profilometer.
引用
收藏
页码：182 / 187
页数：6
相关论文
共 50 条
  • [11] Comparison Research on the Machinability of Hardened Steel when Dry Turning with Ceramic and CBN Cutting Tools
    Tu, Chunjuan
    Guo, Xuhong
    Wang, Wei
    Wang, Chihong
    ADVANCES IN MECHATRONICS TECHNOLOGY, 2011, 43 : 573 - 577
  • [12] Experimental Study on Milling Hardened SKD Steel Using Micro CBN Ball-end Mills
    Liu, Yung-Tien
    Chiu, Neng-Hsin
    Lin, Yen-Chun
    Lai, Chih-Liang
    Lin, Yu-Fu
    Chiu, Hung-Hsiang
    ADVANCES IN ABRASIVE TECHNOLOGY XIII, 2010, 126-128 : 773 - +
  • [13] Technological Possibilities of the Carbide Tools Application for Precision Machining of WCLV Hardened Steel
    Grabowski, Marcin
    Gawlik, Jozef
    Krajewska-Spiewak, Joanna
    Skoczypiec, Sebastian
    Tyczynski, Piotr
    ADVANCES IN SCIENCE AND TECHNOLOGY-RESEARCH JOURNAL, 2022, 16 (01) : 141 - 148
  • [14] The study of CBN tools effect upon the surface state of a hardened 100C6 steel
    Boulanouar, L
    Becir, K
    MECANIQUE INDUSTRIELLE ET MATERIAUX, 1997, 50 (04): : 179 - 181
  • [15] Wear mechanism of cBN tool in cutting of hardened steel
    Egawa, Tsuneo
    Ichikizaki, Tetsuo
    Kuroda, Motofumi
    Hiasa, Yukio
    Tsukamoto, Hidehiko
    Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering, 1995, 61 (06): : 809 - 813
  • [16] Wear behavior of coated tools in laser assisted micro-milling of hardened steel
    Kumar, Mukund
    Melkote, Shreyes N.
    M'Saoubi, Rachid
    WEAR, 2012, 296 (1-2) : 510 - 518
  • [17] A Study of the Influence of Cutting Parameters on Micro Milling of Steel with Cubic Boron Nitride (CBN) Tools
    Klocke, Fritz
    Quito, Fernando
    Arntz, Kristian
    Souza, Alexandre
    MICROMACHINING AND MICROFABRICATION PROCESS TECHNOLOGY XIV, 2009, 7204
  • [18] DETERMINATION OF AN ANGLE IN HARDENED STEEL GRINDING USING CBN
    不详
    MECHANIK MIESIECZNIK NAUKOWO-TECHNICZNY, 1982, 55 (06): : 332 - 332
  • [19] MILLING HARDENED CHROME ALLOY STEEL
    OVUMYAN, GG
    RUSSIAN ENGINEERING JOURNAL-USSR, 1967, 47 (09): : 88 - &
  • [20] High precision cutting and high speed interrupted cutting of hardened steel with PCBN tools
    Sumitomo Electric Industries, Ltd., Super Hard Materials Division, Tool Engineering Department, 1-1-1, Koyakita, Itami, Hyogo, 664-0016, Japan
    Am Soc Mech Eng Manuf Eng Div MED, (825-830):
12345