The Effects of End Part of Winding on Parasitic Capacitances of Induction Motor Fed by PWM Inverter

被引:0
|
作者
Li Junfeng [1 ]
Liu Ruifang [1 ]
Zheng Bohua [1 ]
Zhang Yihuang [1 ]
机构
[1] Beijing Jiaotong Univ, Sch Elect Engn, Beijing, Peoples R China
关键词
PWM inverter; Common-Mode Voltage; Parasitic Capacitance; Winding-End; Bearing Voltage; VOLTAGE; PREDICTION; PARAMETERS; CURRENTS;
D O I
暂无
中图分类号
TM [电工技术]; TN [电子技术、通信技术];
学科分类号
0808 ; 0809 ;
摘要
Parasitic capacitances of motor play a very important role in analysis of bearing current of motor caused by PWM supply. In previous papers, parasitic capacitances generally were acquired from two-dimension symmetry model of motor. The effect of stator winding-end on coupling capacitance was ignored. In this paper, mechanism of common-mode voltage was introduced and equivalent circuit of common-mode of motor was proposed. Relationship between parasitic capacitances and bearing voltage was figured out. 2D and 3D Finite-Element model of motor were established based on geometric dimension of motor respectively which includes with winding-end treatment and not. It's found that length of extended straight part of stator winding and height of squirrel-cage ring are two main factors which can affect C-sr dramatically. Optimized analysis of C-sr based on the two factors was also carried out and optimized group of parameters had been obtained to make C-sr achive the minimum value.
引用
收藏
页数:5
相关论文
共 50 条
  • [11] Analysis of voltage stress in stator winding of IGBT PWM inverter-fed induction motor systems
    Hwang, DH
    Kim, YJ
    Bae, SW
    Kim, DH
    Ro, CG
    Lee, IW
    ICEMS 2003: PROCEEDINGS OF THE SIXTH INTERNATIONAL CONFERENCE ON ELECTRICAL MACHINES AND SYSTEMS, VOLS 1 AND 2, 2003, : 440 - 444
  • [12] A Carrier based PWM Scheme for Dual Inverter-fed Open-end Winding Induction Motor with Single DC Source
    Anusha, K. S.
    Rajeevan, P. P.
    2018 8TH IEEE INDIA INTERNATIONAL CONFERENCE ON POWER ELECTRONICS (IICPE), 2018,
  • [13] Nonlinear control of PWM inverter fed induction motor drives
    Sobczuk, DL
    ISIE'96 - PROCEEDINGS OF THE IEEE INTERNATIONAL SYMPOSIUM ON INDUSTRIAL ELECTRONICS, VOLS 1 AND 2, 1996, : 958 - 962
  • [14] Experimental study of heating in induction motor fed by PWM inverter
    Benhaddadi, M
    Khaldi, R
    Benghanem, M
    IMTC/97 - IEEE INSTRUMENTATION & MEASUREMENT TECHNOLOGY CONFERENCE: SENSING, PROCESSING, NETWORKING, PROCEEDINGS VOLS 1 AND 2, 1997, : 335 - 338
  • [15] MATHEMATICAL MODELS FOR A PWM INVERTER FED INDUCTION MOTOR.
    Lahoud, M.A.
    Odenda, E.J.
    Porter, D.
    Harley, R.G.
    Transactions of the South African Institute of Electrical Engineers, 1983, 74 (pt 2): : 22 - 33
  • [16] The performance analysis of dual-inverter three phase fed induction motor with open-end winding using various PWM schemes
    Wiryajati, I. Ketut
    Giriantari, Ida Ayu Dwi
    Kumara, I. Nyoman Satya
    Jasa, Lie
    WIRELESS NETWORKS, 2021, 27 (02) : 871 - 880
  • [17] The performance analysis of dual-inverter three phase fed induction motor with open-end winding using various PWM schemes
    I. Ketut Wiryajati
    Ida Ayu Dwi Giriantari
    I. Nyoman Satya Kumara
    Lie Jasa
    Wireless Networks, 2021, 27 : 871 - 880
  • [18] Theoretical and Experimental Analysis for Current in a Dual-Inverter-Fed Open-End Winding Induction Motor Drive With Reduced Switching PWM
    Srinivas, S.
    Sekhar, K. Ramachandra
    IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, 2013, 60 (10) : 4318 - 4328
  • [19] Additional Losses Modeling in PWM Inverter Fed Induction Motor Including Skin Effects
    Bentarzi, Hamid
    Kerouch, Yacine
    Refoufi, Larbi
    Mastorakis, Nikos E.
    PROCEEDINGS OF THE 11TH WSEAS INTERNATIONAL CONFERENCE ON AUTOMATIC CONTROL, MODELLING AND SIMULATION: CONTROLLING, MODELLING AND SIMULATION, 2009, : 361 - +
  • [20] Simplified Model Predictive Flux Control for Dual Inverter Fed Open End Winding Induction Motor
    Wu, Di
    Chen, JiFeng
    Zhu, Rui
    Hua, Guowu
    2019 IEEE 10TH INTERNATIONAL SYMPOSIUM ON POWER ELECTRONICS FOR DISTRIBUTED GENERATION SYSTEMS (PEDG 2019), 2019, : 1050 - 1054