3D Printing Metallised Plastics as Terahertz Reflectors

被引：11

作者：

Colla, J. A. ^{[1
,2
]}

Vickers, R. E. M. ^{[1
,2
]}

Nancarrow, M. ^{[1
]}

Lewis, R. A. ^{[1
,2
]}

机构：

[1] Univ Wollongong, Inst Superconducting & Elect Mat, Wollongong, NSW 2522, Australia

[2] Univ Wollongong, Sch Phys, Wollongong, NSW 2522, Australia

来源：

JOURNAL OF INFRARED MILLIMETER AND TERAHERTZ WAVES | 2019年 / 40卷 / 07期

基金：

澳大利亚研究理事会;

关键词：

Terahertz; THz; 3D printing; Metallised plastic; Reflection; Reflective;

D O I：

10.1007/s10762-019-00596-y

中图分类号：

TM [电工技术]; TN [电子技术、通信技术];

学科分类号：

0808 ; 0809 ;

摘要：

3D printing of new metallised plastics is investigated as a means to realise rapid creation of reflective optics for the terahertz regime. The suitability of three commercially available candidate materials was tested across a range of systems which span from 0.2 to 10 THz. Simple reflective planes were printed and characterised by spectroscopy and microscopy. Samples were polished which is shown to give a dramatic improvement to the reflectivity for these materials. The results indicate that metallised plastics have potential uses in low frequency rapid prototyping of reflective optics.

引用

页码：752 / 762

页数：11

共 50 条

[31] 3D printing
Dewit, Bertrand
RADIOTHERAPY AND ONCOLOGY, 2024, 194 : S2 - S2
[32] 3D printing
Attila, Gombos
Muanyag Es Gumi/Plastics and Rubber, 2005, 42 (03): : 89 - 93
[33] Is 3D printing an inclusive innovation?: An examination of 3D printing in Brazil
Woodson, Thomas
Alcantara, Julia Torres
do Nascimento, Milena Silva
TECHNOVATION, 2019, 80-81 : 54 - 62
[34] 3D Printing - Evaluating Particle Emissions of a 3D Printing Pen
Sigloch, Heike
Bierkandt, Frank S.
Singh, Ajay, V
Gadicherla, Ashish K.
Laux, Peter
Luch, Andreas
JOVE-JOURNAL OF VISUALIZED EXPERIMENTS, 2020, (164): : 1 - 15
[35] Estimation of tribological properties of selected plastics materials manufactured by extrusion and 3d printing
BAKOWSKI H.
KRZYSIAK Z.
Tribologia, 2020, 294 (06): : 7 - 12
[36] Influence of 3d printing technology of automotive parts made of plastics on their tribological properties
POSMYK A.
MARZEC P.
Tribologia, 2020, 294 (06): : 65 - 70
[37] Characterization of WEEE plastics and their potential valorisation through the production of 3D printing filaments
Cafiero, L.
De Angelis, D.
Di Dio, M.
Di Lorenzo, P.
Pietrantonio, M.
Pucciarmati, S.
Terzi, R.
Tuccinardi, L.
Tuffi, R.
Ubertini, A.
JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING, 2021, 9 (04):
[38] 3D printing of Al2O3 photonic crystals for terahertz frequencies
Tubio, Carmen R.
Novoa, Jose A.
Martin, Jorge
Guitian, Francisco
Salgueiro, Jose R.
Gil, Alvaro
RSC ADVANCES, 2016, 6 (03) : 2450 - 2454
[39] 3D Vision in 3D Concrete Printing
Sokolov, Dmitrii
Mechtcherine, Viktor
FOURTH RILEM INTERNATIONAL CONFERENCE ON CONCRETE AND DIGITAL FABRICATION, DC 2024, 2024, 53 : 182 - 189
[40] 3D Printed Hollow-Core Terahertz Optical Waveguides with Hyperuniform Disordered Dielectric Reflectors
Ma, Tian
Guerboukha, Hichem
Girard, Martin
Squires, Andrew D.
Lewis, Roger A.
Skorobogatiy, Maksim
ADVANCED OPTICAL MATERIALS, 2016, 4 (12): : 2085 - 2094

← 1 2 3 4 5 →