Complex Surface Inspection on Coordinate Measuring Machine and Error Analysis

被引：0

作者：

Cheng Ruifeng ^{[1
]}

Qian Yingping ^{[1
]}

Wang Yanli ^{[1
]}

Chen Hong ^{[1
]}

机构：

[1] Hubei Univ Technol, Wuhan 430068, Peoples R China

来源：

PROCEEDINGS OF THE SECOND INTERNATIONAL SYMPOSIUM ON TEST AUTOMATION & INSTRUMENTATION, VOL. 3 | 2008年

关键词：

Coordinate Measuring Machine; Parts inspection; Error Analysis;

D O I：

暂无

中图分类号：

TP [自动化技术、计算机技术];

学科分类号：

0812 ;

摘要：

More and more coordinate measuring machines (CMMs) have been applied to the inspection process in various industries. Using coordinate measuring machine to inspect the mixed grip and analyse the measurement error, the paper describes in detail the process how to measure the contour and the complex surface and how to analyse the measurement error sources, all which have provided a basis for acquiring the accurate and efficient measuring results.

引用

页码：1306 / 1309

页数：4

共 50 条

[41] NEW INSPECTION PLANNING STRATEGY FOR SCULPTURED SURFACES USING COORDINATE MEASURING MACHINE
CHO, MW
KIM, K
INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH, 1995, 33 (02) : 427 - 444
[42] FLEXIBLE INSPECTION SYSTEM BASED ON A VISION-GUIDED COORDINATE MEASURING MACHINE
CHO, MW
KIM, MK
KIM, K
INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH, 1995, 33 (05) : 1433 - 1448
[43] A PLM-based automated inspection planning system for coordinate measuring machine
Zhao Haibin
Wang Junying
Wang Boxiong
Wang Jianmei
Chen Huacheng
SENSORS, AUTOMATIC MEASUREMENT, CONTROL, AND COMPUTER SIMULATION, PTS 1 AND 2, 2006, 6358
[44] Development of the mutliagent inspection planning knowledge framework based on the coordinate measuring machine
Peng, Junsong
Bai, Zuolin
Li, Chunbo
Wen, Yi
Zhao, Rujia
Hsi-An Chiao Tung Ta Hsueh/Journal of Xi'an Jiaotong University, 32 (04): : 32 - 35
[45] COORDINATE MEASURING MACHINE
不详
AIRCRAFT ENGINEERING AND AEROSPACE TECHNOLOGY, 1995, 67 (02): : 27 - 27
[46] Accessibility analysis for planning of dimensional inspection with coordinate measuring machines
Spitz, SN
Spyridi, AJ
Requicha, AAG
IEEE TRANSACTIONS ON ROBOTICS AND AUTOMATION, 1999, 15 (04): : 714 - 727
[47] Kinematic modeling and error analysis for a 3DOF parallel-link coordinate measuring machine
Liu, Dejun
Liang, Huaqing
Yin, Hongdong
Qian, Buren
ADVANCES IN MATERIALS MANUFACTURING SCIENCE AND TECHNOLOGY II, 2006, 532-533 : 313 - +
[48] Contributions regarding the application of FMEA analysis to measuring with a Coordinate Measuring Machine
1600, Editura Politechnica (11):
[49] Measuring large amplitude surface figure error using coordinate metrology
Khreishi, Manal
Ohl, Raymond G.
Mcclelland, Ryan
Shiri, Ron
Hewagama, Tilak
Aslam, Shahid
Ulmer, Melville P.
Canavan, Edgar
Liang, Rongguang
OPTICAL ENGINEERING, 2021, 60 (08)
[50] Research on dynamic error caused by three coordinate measuring machine body deformation
Qu Ligang
Liang Yu
Su Changqing
PROCEEDINGS OF THE 2015 INTERNATIONAL CONFERENCE ON ADVANCED ENGINEERING MATERIALS AND TECHNOLOGY, 2015, 38 : 121 - 128

← 1 2 3 4 5 →