Strengthening of timber structures with glued-in rods

被引：93

作者：

Steiger, Rene ^{[1
]}

Serrano, Erik ^{[2
]}

Stepinac, Mislav ^{[3
]}

Rajcic, Vlatka ^{[3
]}

O'Neill, Caoimhe ^{[4
]}

McPolin, Daniel ^{[4
]}

Widmann, Robert ^{[1
]}

机构：

[1] Empa, Swiss Fed Labs Mat Sci & Technol, Struct Engn Res Lab, CH-8600 Dubendorf, Switzerland

[2] Lund Univ, Fac Engn LTH, Div Struct Mech, SE-22100 Lund, Sweden

[3] Univ Zagreb, Fac Civil Engn, Dept Struct, Zagreb 10000, Croatia

[4] Queens Univ, Civil Engn Res Ctr, Belfast BT9 5AG, Antrim, North Ireland

来源：

CONSTRUCTION AND BUILDING MATERIALS | 2015年 / 97卷

关键词：

Reinforcement; Steel rod; FRP rod; Design; Application; Adhesive; Eurocode; 5; Quality control; Linear elastic fracture mechanics; Non-linear elastic fracture mechanics; SELF-TAPPING SCREWS; PULL-OUT STRENGTH; FLEXURAL REINFORCEMENT; BEAMS; JOINTS; CONNECTIONS; BEHAVIOR; NAILS; BARS;

D O I：

10.1016/j.conbuildmat.2015.03.097

中图分类号：

TU [建筑科学];

学科分类号：

0813 ;

摘要：

The research and development of connecting and strengthening timber structural elements with glued-in rods (GiR) has been ongoing since the 1980s. Despite many successful applications in practice, agreement regarding design criteria has not been reached. This state-of-the-art review summarises results from both research and practical applications regarding connections and reinforcement with GiR. The review considers manufacturing methods, mechanisms and parameters governing the performance and strength of GiR, theoretical approaches to estimate their load-bearing capacity and existing design recommendations. (C) 2015 Elsevier Ltd. All rights reserved.

引用

页码：90 / 105

页数：16

共 50 条

[31] Provisions for Ductile Behavior of Timber-to-Steel Connections with Multiple Glued-In Rods
Parida, Gabriela
Johnsson, Helena
Fragiacomo, Massimo
JOURNAL OF STRUCTURAL ENGINEERING, 2013, 139 (09) : 1468 - 1477
[32] Analytical study and finite element modelling of timber connections with glued-in rods in bending
Xu, B. H.
Bouchair, A.
Racher, P.
CONSTRUCTION AND BUILDING MATERIALS, 2012, 34 : 337 - 345
[33] Timber Frame Moment Joints with Glued-In Steel Rods. I: Design
Fragiacomo, Massimo
Batchelar, Mark
JOURNAL OF STRUCTURAL ENGINEERING, 2012, 138 (06) : 789 - 801
[34] Glued-in rods into hardwood at low temperatures
Ratsch, Nils
Bohm, Stefan
Myslicki, Sebastian
Voss, Morten
BAUTECHNIK, 2020, 97 : 86 - 96
[35] New joint design for the improvement of steel rods glued-in timber using an adhesive bulb
Estevez, J.
Otero, D.
Martin, E.
Vazquez, J. A.
STRUCTURES AND ARCHITECTURE, 2010, : 1117 - 1124
[36] Distributed fiber optic strain sensing in axially loaded glued-in steel rods in glued-laminated timber
Ernewein, Benjamin
Woods, Joshua E.
CONSTRUCTION AND BUILDING MATERIALS, 2023, 392
[37] Experimental investigation of joints with multiple glued-in rods in glued-laminated timber under axial tensile loading
Bouchard, Raphael
Salenikovich, Alexander
Frenette, Caroline
Bedard-Blanchet, Guillaume
CONSTRUCTION AND BUILDING MATERIALS, 2021, 293
[38] Experimental Study of Timber-Steel Arch with the Support Joints on Glued-in Steel Rods
Koroteev, Dmitry D.
Boytemirov, Farid A.
Kharun, Makhmud
JOURNAL OF MECHANICS OF CONTINUA AND MATHEMATICAL SCIENCES, 2019, : 306 - 314
[39] Glued-in CFRP and GFRP rods in block laminated timber subjected to monotonic and cyclic loading
Toumpanaki, Eleni
Ramage, Michael H.
COMPOSITE STRUCTURES, 2021, 272
[40] Glued-in CFRP and GFRP rods in block laminated timber subjected to monotonic and cyclic loading
Toumpanaki, Eleni
Ramage, Michael H.
Composite Structures, 2021, 272

← 1 2 3 4 5 →