Determining the Fracture Toughness of Alumina Ceramics from Vickers Indentations

被引：0
|
作者：
Curkovic, Lidija [1 ,2 ]
Rede, Vera [3 ,4 ]
Grilec, Kresimir [5 ]
Lalic, Marijo [2 ]
机构：
[1] Univ Zagreb, Fac Chem Engn, Dept Analyt Chem, Zagreb 41000, Croatia
[2] Univ Zagreb, Fac Mech Engn & Naval Architecture, Dept Mat, Zagreb 41000, Croatia
[3] Nikola Tesla, Zagreb, Croatia
[4] Univ Zagreb, Fac Mech Engn & Naval Architecture, Dept Mat Engn, Zagreb 41000, Croatia
[5] Sch Mech Engn, Zagreb, Croatia
来源：
MATERIALS TESTING-MATERIALS AND COMPONENTS TECHNOLOGY AND APPLICATION | 2009年 / 51卷 / 04期
关键词：
D O I：
暂无
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
Many methods are currently used to measure fracture toughness of ceramic materials. Due to its simplicity, its non-destructive nature, and the fact that minimal machining is required to prepare the sample, the use of the Vickers hardness indentations to measure fracture toughness (K(IC)) has become quite popular. The aim of the present work is to investigate the hardness from Vickers indentations and the fracture toughness based on crack-length measurements of cracks introduced into the sample surface of cold isostatically pressed (CIP)-Al(2)O(3) with 99.8 % purity.
引用
收藏
页码：199 / 202
页数：4
相关论文
共 50 条
  • [31] Finite element simulation of vickers microindentation on alumina ceramics
    Niezgoda, T
    Malachowski, J
    Boniecki, M
    CERAMICS INTERNATIONAL, 1998, 24 (05) : 359 - 364
  • [32] FRACTURE TOUGHNESS AND FRACTURE SURFACE FEATURES IN ALUMINA
    SWANSON, GD
    GROSS, GE
    AMERICAN CERAMIC SOCIETY BULLETIN, 1969, 48 (08): : 825 - &
  • [33] Fracture toughness of structural ceramics
    Mukhopadhyay, AK
    Datta, SK
    Chakraborty, D
    CERAMICS INTERNATIONAL, 1999, 25 (05) : 447 - 454
  • [34] Increasing the fracture toughness of alumina based ceramics by oxidation-induced surface stresses
    Wrba, J
    Lerch, N
    Müller, G
    JOURNAL OF MATERIALS SCIENCE LETTERS, 1998, 17 (11) : 921 - 923
  • [35] Synthesis of zirconia nanoparticles on carbon nanotubes and their potential for enhancing the fracture toughness of alumina ceramics
    Zhu, Yue-Feng
    Shi, Lei
    Liang, Ji
    Hui, David
    Lau, Kin-tak
    COMPOSITES PART B-ENGINEERING, 2008, 39 (7-8) : 1136 - 1141
  • [36] Preparation of rare earth oxide doped alumina ceramics, their hardness and fracture toughness determinations
    Maiti, Kuntal
    Sil, Anjan
    INDIAN JOURNAL OF ENGINEERING AND MATERIALS SCIENCES, 2006, 13 (05) : 443 - 450
  • [37] Effect of alumina on the strength, fracture toughness, and crystal structure of fluorcanasite glass-ceramics
    Zhang, NZ
    Anusavice, KJ
    JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 1999, 82 (09) : 2509 - 2513
  • [38] Influences of Crack Face Bridging Stress and Microstructure on Fracture Toughness of Toughened Alumina Ceramics
    Sakaida, Yoshihisa
    Yoshida, Hajime
    Mori, Shotaro
    FRACTURE AND STRENGTH OF SOLIDS VII, PTS 1 AND 2, 2011, 462-463 : 972 - 978
  • [39] Characterization of hardness, elastic modulus and fracture toughness of RB-SiC ceramics at elevated temperature by Vickers test
    Rao, Xiaoshuang
    Zhang, Feihu
    Luo, Xichun
    Ding, Fei
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2019, 744 : 426 - 435
  • [40] Fatigue crack initiation from microstructurally small vickers indentations
    Vuherer, T.
    Godina, A.
    Burzic, Z.
    Gliha, V.
    METALURGIJA, 2007, 46 (04): : 237 - 243
12345