Determining the Fracture Toughness of Alumina Ceramics from Vickers Indentations

被引：0
|
作者：
Curkovic, Lidija [1 ,2 ]
Rede, Vera [3 ,4 ]
Grilec, Kresimir [5 ]
Lalic, Marijo [2 ]
机构：
[1] Univ Zagreb, Fac Chem Engn, Dept Analyt Chem, Zagreb 41000, Croatia
[2] Univ Zagreb, Fac Mech Engn & Naval Architecture, Dept Mat, Zagreb 41000, Croatia
[3] Nikola Tesla, Zagreb, Croatia
[4] Univ Zagreb, Fac Mech Engn & Naval Architecture, Dept Mat Engn, Zagreb 41000, Croatia
[5] Sch Mech Engn, Zagreb, Croatia
来源：
MATERIALS TESTING-MATERIALS AND COMPONENTS TECHNOLOGY AND APPLICATION | 2009年 / 51卷 / 04期
关键词：
D O I：
暂无
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
Many methods are currently used to measure fracture toughness of ceramic materials. Due to its simplicity, its non-destructive nature, and the fact that minimal machining is required to prepare the sample, the use of the Vickers hardness indentations to measure fracture toughness (K(IC)) has become quite popular. The aim of the present work is to investigate the hardness from Vickers indentations and the fracture toughness based on crack-length measurements of cracks introduced into the sample surface of cold isostatically pressed (CIP)-Al(2)O(3) with 99.8 % purity.
引用
收藏
页码：199 / 202
页数：4
相关论文
共 50 条
  • [1] Determining the fracture toughness of alumina ceramics from vickers indentations
    Curkovic, Lidija
    Rede, Vera
    Grilec, Krešimir
    Lalic, Marijo
    Materialpruefung/Materials Testing, 2009, 51 (04): : 199 - 202
  • [2] Fracture Toughness of Alumina Ceramics Determined by Vickers Indentation Technique
    Majic, Marijana
    Curkovic, Lidija
    MATERIALS TESTING, 2012, 54 (04) : 228 - 232
  • [3] Determining the toughness of ceramics from Vickers indentations using the crack-opening displacements: An experimental study
    Kruzic, JJ
    Ritchie, RO
    JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2003, 86 (08) : 1433 - 1436
  • [4] COMPARISON OF KNOOP AND VICKERS INDENTATIONS FOR CONTROLLED SURFACE FLAW FRACTURE-TOUGHNESS
    PETROVIC, JJ
    JOURNAL OF METALS, 1981, 33 (09): : A22 - A22
  • [5] COMPARISON OF KNOOP AND VICKERS INDENTATIONS FOR CONTROLLED SURFACE-FLAW FRACTURE-TOUGHNESS
    PETROVIC, JJ
    AMERICAN CERAMIC SOCIETY BULLETIN, 1981, 60 (08): : 853 - 853
  • [6] Vickers indentation fracture toughness of Y-TZP dental ceramics
    Coric, Danko
    Renjo, Marijana Majic
    Curkovic, Lidija
    INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2017, 64 : 14 - 19
  • [7] Influence of sintering temperature on fracture toughness for high toughness alumina ceramics
    Liu, Tong
    Liu, Wen-Ting
    Beijing Hangkong Hangtian Daxue Xuebao/Journal of Beijing University of Aeronautics and Astronautics, 2001, 27 (06): : 681 - 683
  • [8] STATISTICAL ANALYSIS OF VICKERS INDENTATION FRACTURE TOUGHNESS OF Y-TZP CERAMICS
    Coric, Danko
    Curkovic, Lidija
    Renjo, Marijana Majic
    TRANSACTIONS OF FAMENA, 2017, 41 (02) : 1 - 16
  • [9] Comparison of Zirconia Toughened Alumina Fracture Toughness Obtained from Vickers Indentation by Applying Various Equations
    Roslan, Alida
    Manshor, Hanisah
    Azhar, Ahmad Zahirani Ahmad
    MATERIALS CHARACTERIZATION USING X-RAYS AND RELATED TECHNIQUES, 2019, 2068
  • [10] FRACTURE TOUGHNESS OF CERAMICS BY THE VICKERS INDENTATION CRACK LENGTH METHOD: A CRITICAL REVIEW
    Quinn, George D.
    MECHANICAL PROPERTIES AND PERFORMANCE OF ENGINEERING CERAMICS AND COMPOSITES II, 2007, 27 (02): : 45 - 62
12345