Microstructural stability of binary Al-Li alloys at low temperatures

被引:21
|
作者
Noble, B
Harris, SJ
Dinsdale, K
机构
[1] Dept. of Mat. Eng. and Mat. Design, University of Nottingham, University Park
关键词
D O I
10.1016/S1359-6454(96)00294-7
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Binary Al-Li alloys containing 6.5, 9.5 and 11.5 at.%Li have been aged for 24 h at 423 K and then subjected to long term exposure at 343, 373 and 403 K. Proof stress and fracture energy have been measured as a function of exposure time, showing that little or no embrittlement occurs at 343 K, but the alloys undergo increasing degrees of embrittlement as the exposure temperature is raised to 403 K. Transmission electron microscopy and electrical resistivity measurements show that an exposure temperature of 343 K results in very slow precipitation of fine delta', but at high exposure temperatures the dominant process is growth of pre-existing delta' particles that have been produced by the 423 K pre-age. These results are discussed in terms of the kinetics of precipitation and the importance of quenched-in vacancies. (C) 1997 Acta Metallurgica Inc.
引用
收藏
页码:2069 / 2078
页数:10
相关论文
共 50 条
  • [21] MICROSTRUCTURAL STUDIES OF AL-LI ALLOYS PRODUCED BY SPRAY CASTING
    KOJIMA, KA
    DUNCAN, AJ
    KAUFMAN, MJ
    LEWIS, RE
    JOURNAL OF METALS, 1988, 40 (07): : A44 - A44
  • [22] Microstructural aspects of additive manufacturing of Al-Li alloys with high Li content
    Liu, Dongmei
    Yuerekli, Burak
    Ullsperger, Tobias
    Matthaeus, Gabor
    Schade, Lisa
    Nolte, Stefan
    Rettenmayr, Markus
    MATERIALS & DESIGN, 2021, 198
  • [23] COARSENING OF DELTA'(AL3LI) PRECIPITATES IN BINARY AL-LI ALLOYS
    MAHALINGAM, K
    GU, BP
    LIEDL, GL
    SANDERS, TH
    ACTA METALLURGICA, 1987, 35 (02): : 483 - 498
  • [24] COARSENING OF DELTA-' (AL3LI) AND BINARY AL-LI ALLOYS
    SANDERS, TH
    GOKHALE, A
    MAHALINGAM, K
    JOURNAL OF METALS, 1988, 40 (07): : A21 - A21
  • [25] MICROSTRUCTURAL STUDY OF CENTRIFUGALLY ATOMIZED POWDERS OF AL-LI AND AL-LI-FE ALLOYS
    HINOJOSATORRES, J
    RIOSJARA, D
    CHAMPIER, G
    MATERIALS TRANSACTIONS JIM, 1990, 31 (08): : 703 - 709
  • [26] SUSTAINED LOAD CRACKING OF AL-LI ALLOYS AT INTERMEDIATE TEMPERATURES
    JATA, KV
    JOURNAL OF METALS, 1988, 40 (11): : 47 - 47
  • [27] NEW EVIDENCE FOR GP ZONES IN BINARY AL-LI ALLOYS
    PAPAZIAN, JM
    SIGLI, C
    SANCHEZ, JM
    SCRIPTA METALLURGICA, 1986, 20 (02): : 201 - 206
  • [28] PRECIPITATION STRENGTHENING OF BINARY AL-LI ALLOYS BY DELTA' PRECIPITATES
    HUANG, JC
    ARDELL, AJ
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1988, 104 : 149 - 156
  • [29] PRECIPITATION STRENGTHENING OF BINARY AL-LI ALLOYS BY DELTA' PRECIPITATES
    HUANG, JC
    ARDELL, AJ
    JOURNAL OF METALS, 1987, 39 (07): : A48 - A48
  • [30] MICROSTRUCTURAL CHARACTERIZATION OF SHEAR-BAND FORMATION IN AL-LI ALLOYS
    CHEN, RW
    VECCHIO, KS
    JOURNAL DE PHYSIQUE IV, 1994, 4 (C8): : 459 - 464