Comparison of Lead and WC-Co Materials against Gamma Irradiation

被引:31
|
作者
Buyuk, B. [1 ]
Tugrul, A. B. [1 ]
机构
[1] Istanbul Tech Univ, Energy Inst, Nucl Res Div, TR-34469 Istanbul, Turkey
关键词
D O I
10.12693/APhysPolA.125.423
中图分类号
O4 [物理学];
学科分类号
0702 ;
摘要
According to RoHS (Restriction of Hazardous Substances) directive of European Union it is restricted using lead in many equipment and applications. It is possible to enlarge the restriction of lead usage in some other applications which is including some of nuclear applications in the future. Therefore new materials or systems need to be developed instead of lead as radiation shielding materials and/or collimators. In this study pure tungsten, tungsten carbide-cobalt (WC-Co) materials were investigated against gamma radiation. For gamma radiation Cs-137 and Co-60 gamma radioisotope sources were used. The linear and mass attenuations were calculated. The experimental results were compared with XCOM computer code. Usage possibilities of WC-Co instead of lead in nuclear applications as gamma shielding material were discussed. It has been investigated that the linear gamma attenuation coefficients of lead and WC-Co are very close to each other. Therefore it could be said that WC-Co materials is an alternative promising material which could be used instead of lead as gamma shielding material and/or collimator.
引用
收藏
页码:423 / 425
页数:3
相关论文
共 50 条
  • [21] Functionally graded WC-Co materials produced by electrophoretic deposition
    Put, S
    Vleugels, J
    Van der Biest, O
    SCRIPTA MATERIALIA, 2001, 45 (10) : 1139 - 1145
  • [22] ELASTIC AND PLASTIC CHARACTERISTICS OF WC-CO COMPOSITE-MATERIALS
    CHERMANT, JL
    OSTERSTOCK, F
    POWDER METALLURGY INTERNATIONAL, 1979, 11 (03): : 106 - 109
  • [23] The influence of oxygen on the wear of WC-Co sliding against copper
    Ekholm, F.
    Lindgren, J. Heinrichs
    Wiklund, U.
    Jacobson, S.
    INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2025, 128
  • [24] Surface softening and hardening of WC-Co using pulsed laser irradiation
    Kano, S.
    Inoue, T.
    SURFACE & COATINGS TECHNOLOGY, 2006, 201 (1-2): : 223 - 229
  • [25] Effect of TaC on plastic deformation of WC-Co and Ti(C, N)-WC-Co
    Östberg, G
    Buss, K
    Christensen, M
    Norgren, S
    Andrén, HO
    Mari, D
    Wahnström, G
    Reineck, I
    INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2006, 24 (1-2): : 145 - 154
  • [26] Kinetics and oxidation behavior of laser clad WC-Co and Ni/WC-Co coatings
    Erfanmanesh, Mohammad
    Abdollah-Pour, Hassan
    Mohammadian-Semnani, Hamidreza
    Shoja-Razavi, Reza
    CERAMICS INTERNATIONAL, 2018, 44 (11) : 12805 - 12814
  • [27] Morphology of WC grains in WC-Co alloys
    Lay, S.
    Allibert, C. H.
    Christensen, M.
    Wahnstrom, G.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2008, 486 (1-2): : 253 - 261
  • [28] Nanoindentation of WC-Co hardmetals
    Duszova, Annamaria
    Halgas, Radoslav
    Bl'anda, Marek
    Hvizdos, Pavol
    Lofaj, Frantisek
    Dusza, Jan
    Morgiel, Jerzy
    JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2013, 33 (12) : 2227 - 2232
  • [29] Oxidation behavior of WC-Co
    Boston Univ, Boston, United States
    Mater Sci Eng A Struct Mater Prop Microstruct Process, 1-2 (206-212):
  • [30] Oxidation behavior of WC-Co
    Basu, SN
    Sarin, VK
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1996, 209 (1-2): : 206 - 212