Comparative study of different biodiesel-diesel blends

被引:13
|
作者
Bukkarapu, Kiran Raj [1 ]
机构
[1] VFSTR Univ, Dept Mech Engn, Guntur, Andhra Pradesh, India
关键词
Biodiesel; density; flash point; kinematic viscosity; ENGINE PERFORMANCE; VEGETABLE-OILS; FUELS; VISCOSITY;
D O I
10.1080/01430750.2017.1393775
中图分类号
TE [石油、天然气工业]; TK [能源与动力工程];
学科分类号
0807 ; 0820 ;
摘要
Diesel and biodiesel have their own advantages and disadvantages. Blending biodiesel with diesel could help in countering few disadvantages of the earlier. Biodiesels were processed from different waste cooking oils such as used coconut oil, groundnut oil, palm oil and sunflower oil. These methyl esters were blended with diesel and the variations in their properties such as density, flashpoint and kinematic viscosity were studied. Blending helped in pulling down the flashpoints and viscosities of methyl esters processed from cooked groundnut oil (WGME), palm oil (WPME) and sunflower oil (WSME) within the limits that qualify them as biodiesels. Insignificant changes in their densities due to blending were observed. Among the four methyl esters and their blends, waste coconut methyl esters (WCME) were found to possess better properties, comparable to diesel, making it the best one to be blended with diesel. This signifies the importance of WCME-diesel blend as a future fuel.
引用
收藏
页码:295 / 303
页数:9
相关论文
共 50 条
  • [21] Quantification of biodiesel in biodiesel-diesel blends using spectrofluorimetry and multivariate calibration
    C. N. C. Corgozinho
    P. J. S. Barbeira
    Journal of Analytical Chemistry, 2015, 70 : 936 - 942
  • [22] Influence of soybean biodiesel content on basic properties of biodiesel-diesel blends
    Qi, D. H.
    Lee, C. F.
    JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS, 2014, 45 (02) : 504 - 507
  • [23] Study of particle size distribution emitted from a diesel engine by diesel and biodiesel-diesel blends fuels
    Cheng, Xiaobei
    Chen, Liang
    Yan, Fangqin
    Chen, Guohua
    PROCEEDINGS OF THE ASME INTERNAL COMBUSTION ENGINE DIVISION FALL TECHNICAL CONFERENCE, 2013, VOL 2: NUMERICAL SIMULATION; ENGINE DESIGN, LUBRICATION, AND APPLICATIONS, 2014,
  • [24] Performance and emissions of a diesel engine fueled by biodiesel-diesel, biodiesel-diesel-additive and kerosene-biodiesel blends
    Roy, Murari Mohon
    Wang, Wilson
    Alawi, Majed
    ENERGY CONVERSION AND MANAGEMENT, 2014, 84 : 164 - 173
  • [25] Emission study on a direct injection diesel engine powered with blends of Moringa oleifera biodiesel-diesel
    Venu, Harish
    Appavu, Prabhu
    Krishnan, Venkatesan
    Jayaraman, Jayaprabakar
    Manimuthu, Mudhu Krishnan
    Kosinapogu, Sudhakar
    Vallapudi, Dhana Raju
    ENVIRONMENTAL QUALITY MANAGEMENT, 2024, 33 (04) : 357 - 363
  • [26] Estimation of Viscosity of Biodiesel-Diesel Blends with Near Infrared Spectroscopy
    Zhang, Weibo
    Wu, Mingming
    PROGRESS IN RENEWABLE AND SUSTAINABLE ENERGY, PTS 1 AND 2, 2013, 608-609 : 324 - 327
  • [27] Properties and corrosion behaviors of mild steel in biodiesel-diesel blends
    Dharma, S.
    Silitonga, A. S.
    Shamsuddin, A. H.
    Sebayang, A. H.
    Milano, Jassinnee
    Sebayang, R.
    Sarjianto
    Ibrahim, H.
    Bahri, N.
    Ginting, B.
    Damanik, N.
    ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS, 2023, 45 (02) : 3887 - 3899
  • [28] The Basic Properties of Transesterified Corn Oil and Biodiesel-Diesel Blends
    Aydin, F.
    Kafadar, A. B.
    Erdogan, S.
    Saydut, A.
    Kaya, C.
    Hamamci, C.
    ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS, 2011, 33 (08) : 745 - 751
  • [29] Fuel Property Determination of Biodiesel-Diesel Blends By Terahertz Spectrum
    Zhao, Hui
    Zhao, Kun
    Bao, Rima
    JOURNAL OF INFRARED MILLIMETER AND TERAHERTZ WAVES, 2012, 33 (05) : 522 - 528
  • [30] Emission and performance improvement analysis of biodiesel-diesel blends with additives
    Imtenan, S.
    Masjuki, H. H.
    Varman, M.
    Arbab, M. I.
    Sajjad, H.
    Fattah, I. M. Rizwanul
    Abedin, M. J.
    Hasib, Abu Saeed Md
    10TH INTERNATIONAL CONFERENCE ON MECHANICAL ENGINEERING (ICME 2013), 2014, 90 : 472 - 477