A vehicle electric power generation system with improved output power and efficiency

被引:16
|
作者
Liang, F [1 ]
Miller, JM [1 ]
Xu, XY [1 ]
机构
[1] Ford Motor Co, Sci Res Lab, Dearborn, MI 48121 USA
关键词
alternator; generator; rectifier;
D O I
10.1109/28.806048
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
This paper presents a vehicle electric power generation system with improved output power and efficiency. At low speed, the output power of the system is maximized by using a controllable rectifier to optimize the operating conditions of the alternator. The controllable rectifier is synchronized with the alternator based on the zero-crossing information of the third harmonic voltage. The output power is controlled by shifting the phase voltage with respect to the third harmonic voltage. At high speed, the system output power and efficiency are increased by changing the number of turns of the alternator stator windings, Winding reconfiguration is realized by winding taps and use of two rectifiers and two switches. A proof-of-concept system has been built and tested in the laboratory. The test data show that the new system can increase the output power significantly at both low and high speed, In the speed range in which the alternator is operated most of the time, the winding reconfiguration increases both the output power and efficiency. For the same output power as a production alternator, the winding reconfiguration unit improves the efficiency by 21% (from 47% up to 57%).
引用
收藏
页码:1341 / 1346
页数:6
相关论文
共 50 条
  • [21] A solar electric power system for charging an electric vehicle
    Barry, A
    Patten, JA
    McInnis, T
    Hartgen, DT
    SOLAR '96 - THE 1996 AMERICAN SOLAR ENERGY SOCIETY ANNUAL CONFERENCE, PROCEEDINGS OF, 1996, : 20 - 25
  • [22] Efficiency improvement of IPMSG in the electric power generating system of a range-extended electric vehicle
    Lee, Dongsu
    Park, Gyeong-Jae
    Son, Byungkwan
    Jung, Ho-Chang
    IET ELECTRIC POWER APPLICATIONS, 2019, 13 (07) : 943 - 950
  • [23] Power Quality Analysis for Distributed Generation and Electric Vehicle Integrated Distribution System
    Biswas, Md Multan
    Akhter, Sultana Razia
    Paul, Kamal Chandra
    2020 55TH INTERNATIONAL UNIVERSITIES POWER ENGINEERING CONFERENCE (UPEC), 2020,
  • [24] The Match Of Output Power And Conversion Efficiency Of Thermoelectric Generation Technology For Vehicle Exhausts Waste Heat
    Zhang, Xu
    Hou, Zhi-xiang
    Gao, Jia-kun
    Wang, Shu-dong
    PROCEEDINGS 2016 EIGHTH INTERNATIONAL CONFERENCE ON MEASURING TECHNOLOGY AND MECHATRONICS AUTOMATION ICMTMA 2016, 2016, : 805 - 810
  • [25] Design of hybrid power system of electric vehicle
    Xu, Jianming
    Kang, Longyun
    Wen, Maoqin
    Zhou, Shiqiong
    Cao, Binggang
    Dianli Xitong Zidonghua/Automation of Electric Power Systems, 2012, 36 (03): : 60 - 64
  • [26] Power Electronics in Electric Vehicle Powertrain System
    Tsai, Hsin-Chang
    2024 INTERNATIONAL VLSI SYMPOSIUM ON TECHNOLOGY, SYSTEMS AND APPLICATIONS, VLSI TSA, 2024,
  • [27] Modeling and simulation of electric vehicle power system
    Lee, JM
    Cho, BH
    IECEC-97 - PROCEEDINGS OF THE THIRTY-SECOND INTERSOCIETY ENERGY CONVERSION ENGINEERING CONFERENCE, VOLS 1-4: VOL.1: AEROSPACE POWER SYSTEMS AND TECHNOL; VOL 2: ELECTROCHEMICAL TECHNOL, CONVERSION TECHNOL, THERMAL MANAGEMENT; VOLS 3: ENERGY SYSTEMS, RENEWABLE ENERGY RESOURCES, ENVIRONMENTAL IMPACT, POLICY IMPACTS ON ENERGY; VOL 4: POST DEADLINE PAPERS, INDEX, 1997, : 2005 - 2010
  • [28] Influence electric vehicle charging to power system
    Janiga, Peter
    Liska, Martin
    Janicek, Frantisek
    PROCEEDINGS OF THE 14TH INTERNATIONAL SCIENTIFIC CONFERENCE ELECTRIC POWER ENGINEERING 2013, 2013, : 747 - 752
  • [29] Modelling and simulation of vehicle electric power system
    Lee, W
    Choi, D
    Sunwoo, M
    JOURNAL OF POWER SOURCES, 2002, 109 (01) : 58 - 66
  • [30] Analysis of electric power generation characteristics for hybrid power system
    Yang, J. J.
    Qu, B.
    Jiang, L. M.
    Lei, L.
    Chen, L.
    Tao, W. Q.
    Qi, Y.
    Proceedings of the 2016 4th International Conference on Mechanical Materials and Manufacturing Engineering (MMME 2016), 2016, 79 : 700 - 707