The influence of recipe, curing temperature and styrene content on the chemical shrinkage in thermoset resins

被引：0
|
作者：
Stenberg, R
Slotte, S
Holmberg, JA
机构：
来源：
COMPOSITES AND SANDWICH STRUCTURES | 1997年
关键词：
D O I：
暂无
中图分类号：
TB33 [复合材料];
学科分类号：
摘要：
This work describes an experimental study of the shrinkage in unsaturated polyester resins. Shrinkage measurements during cure were performed using an in-house equipment. The resins chosen for this study were an isophthalic and an orthophthalic polyester. The objective of this work was to evaluate the influence of recipe, curing temperature, styrene content in resin, and type of polyester resin (iso or ortho) on the amount of chemical shrinkage. Styrene content and curing temperature were found to affect the amount of shrinkage significantly.
引用
收藏
页码：331 / 340
页数：10
相关论文
共 50 条
  • [21] Influence of Mould Wall Temperature and Content of Recycled Material on Shrinkage of Polymeric Part
    Hrzan, Matija
    Sercer, Mladen
    TEHNICKI VJESNIK-TECHNICAL GAZETTE, 2019, 26 (04): : 1182 - 1185
  • [22] Influence of Fly Ash Content and Early Curing Temperature on Tensile Performance of EGC
    Wan X.
    Liu J.
    Zhu Y.
    Yu Q.
    Zeng Y.
    Jianzhu Cailiao Xuebao/Journal of Building Materials, 2022, 25 (04): : 401 - 407
  • [23] Influence of curing temperature on autogenous shrinkage and cracking resistance of high-performance concrete at an early age
    Shen, Dejian
    Jiang, Jinliang
    Shen, Jiaxin
    Yao, Panpan
    Jiang, Guoqing
    CONSTRUCTION AND BUILDING MATERIALS, 2016, 103 : 67 - 76
  • [24] Influence of Ambient Temperature and Light-curing Moment on Polymerization Shrinkage and Strength of Resin Composite Cements
    Rohr, N.
    Mueller, J. A.
    Fischer, J.
    OPERATIVE DENTISTRY, 2018, 43 (06) : 619 - 630
  • [25] Dry Shrinkage Rate of Styrene-Butadiene Copolymer Dispersion/Calcium Sulphoaluminate Cement Mortar under Different Curing Temperature and Humidity
    Wang R.
    Zhang T.
    Jianzhu Cailiao Xuebao/Journal of Building Materials, 2018, 21 (05): : 768 - 774
  • [26] Isocyanate emission from PUR adhesives: Influence of temperature, monomer content, and curing mechanism
    Wirts, M
    Salthammer, T
    ENVIRONMENTAL SCIENCE & TECHNOLOGY, 2002, 36 (08) : 1827 - 1832
  • [27] Marine composites based on low styrene content resins. Influence of lamination procedure and peel plies on interlaminar resistance
    Perrot, Yves
    Davies, Peter
    Kerboul, Andre
    Baley, Christophe
    APPLIED COMPOSITE MATERIALS, 2008, 15 (02) : 87 - 97
  • [28] Marine Composites Based on Low Styrene Content Resins. Influence of Lamination Procedure and Peel Plies on Interlaminar Resistance
    Yves Perrot
    Peter Davies
    André Kerboul
    Christophe Baley
    Applied Composite Materials, 2008, 15 : 87 - 97
  • [29] Interplay of curing and thermal degradation in epoxy resins cured with amino acids: Influence of the maximum curing temperature on the network structure, crystal morphology and mechanical properties
    Rothenhaeusler, Florian
    Ruckdaeschel, Holger
    JOURNAL OF APPLIED POLYMER SCIENCE, 2023, 140 (45)
  • [30] Correlation of shear and dielectric ion viscosity of dental resins - Influence of composition, temperature and filler content
    Steinhaus, Johannes
    Hausnerova, Berenika
    Haenel, Thomas
    Selig, Daniela
    Duvenbeck, Fabian
    Moeginger, Bernhard
    DENTAL MATERIALS, 2016, 32 (07) : 899 - 907
12345