Extended Strain Hardening by a Sequential Operation of Twinning Induced Plasticity and Transformation Induced Plasticity in a Low Ni Duplex Stainless Steel

被引：27
|
作者：
Choi, Jeom Yong [1 ]
Hwang, Si Woo [2 ]
Ha, Min Chul [2 ]
Park, Kyung-Tae [2 ]
机构：
[1] POSCO Tech Res Lab, STS Prod Grp, Pohang 790785, South Korea
[2] Hanbat Natl Univ, Dept Mat Sci & Engn, Taejon 305719, South Korea
来源：
METALS AND MATERIALS INTERNATIONAL | 2014年 / 20卷 / 05期
关键词：
metals; deformation; microstructure; transmission electron microscopy; tensile properties; DEFORMATION MICROSTRUCTURE; FCC->HCP TRANSFORMATION; MARTENSITE FORMATION; TRIP; NUCLEATION; CORROSION; MECHANISM; BEHAVIOR;
D O I：
10.1007/s12540-014-5014-x
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Extended strain hardening was realized by a sequential operation of twinning induced plasticity (TWIP) followed by transformation induced plasticity (TRIP) in a Fe-20Cr-3Mn-2Cu-1Ni-1Si-0.2N duplex stainless steel (DSS). As a result, the present DSS exhibited an excellent combination of strength - ductility of 900 MPa which was 75% superior to that of conventional DSSs. The deformed microstructures of the present DSS revealed that strain induced martensite (SIM) causing TRIP primarily nucleated at intersections of mechanical twins without formation of E martensite which is an intermediate phase during SW transformation. In addition, the sequential operation of TWIP-TRIP enables strain hardening to be extended to higher strains compared to the operation of TWIP alone.
引用
收藏
页码：893 / 898
页数：6
相关论文
共 50 条
  • [21] Comparison of twinning evolution with work hardening ability in twinning-induced plasticity steel under different strain rates
    Yang, H. K.
    Zhang, Z. J.
    Zhang, Z. F.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2015, 622 : 184 - 188
  • [22] Phase Transformation-Induced Strain-Rate Dependence Effect in Economical Transformation-Induced Plasticity-Aided Duplex Stainless Steel
    Qingxuan Ran
    Xiaoru Yang
    Yage Meng
    Xiaojun Jiang
    Rihong Han
    Shaoqing Wang
    Yinan Jiao
    Yabin Cao
    Zhihao Feng
    Journal of Materials Engineering and Performance, 2022, 31 : 5063 - 5069
  • [23] Phase Transformation-Induced Strain-Rate Dependence Effect in Economical Transformation-Induced Plasticity-Aided Duplex Stainless Steel
    Ran, Qingxuan
    Yang, Xiaoru
    Meng, Yage
    Jiang, Xiaojun
    Han, Rihong
    Wang, Shaoqing
    Jiao, Yinan
    Cao, Yabin
    Feng, Zhihao
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2022, 31 (06) : 5063 - 5069
  • [24] An alternative model for the strain hardening of FCC alloys that twin, validated for twinning-induced plasticity steel
    Sevillano, Javier Gil
    SCRIPTA MATERIALIA, 2009, 60 (05) : 336 - 339
  • [25] Effect of deformation temperature on transformation-induced plasticity effect of lean duplex stainless steel
    ZHANG Wei
    ZHUANG Wei
    HU Jincheng
    BaosteelTechnicalResearch, 2014, 8 (03) : 42 - 46
  • [26] Grain size effect on strain hardening in twinning-induced plasticity steels
    Gutierrez-Urrutia, I.
    Raabe, D.
    SCRIPTA MATERIALIA, 2012, 66 (12) : 992 - 996
  • [27] On the TRIP steel: (Strain-induced transformation and transformation-induced plasticity)
    1600, Iron and Steel Institute of Japan (100):
  • [28] Low-alloy duplex, directly quenched transformation-induced plasticity steel
    Yi, H. L.
    Ryu, J. H.
    Bhadeshia, H. K. D. H.
    Yen, H. W.
    Yang, J. R.
    SCRIPTA MATERIALIA, 2011, 65 (07) : 604 - 607
  • [29] The sequential twinning-transformation induced plasticity effects in a thermomechanically processed high Mn austenitic steel
    Sabzi, H. Eskandari
    Zarei-Hanzaki, A.
    Abedi, H. R.
    Mateo, A.
    Roa, J. J.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2018, 725 : 242 - 249
  • [30] The effects of bimodal grain size distributions on the work hardening behavior of a TRansformation-TWinning induced plasticity steel
    Sabzi, H. Eskandari
    Hanzaki, A. Zarei
    Abedi, H. R.
    Soltani, R.
    Mateo, A.
    Roa, J. J.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2016, 678 : 23 - 32
12345