Effect of aging on the corrosion behavior of 6005 Al alloys in 3.5 wt% NaCl aqueous solution

被引:9
|
作者
Li, Wenkai [1 ,2 ]
Chen, Xia [1 ]
Chen, Bin [2 ]
机构
[1] Wuhan Univ Sci & Technol, State Key Lab Refractories & Met, Wuhan 430081, Shanghai, Peoples R China
[2] Shanghai Jiao Tong Univ, Sch Mat Sci & Engn, Shanghai 200240, Peoples R China
关键词
MG-SI ALLOYS; ALUMINUM-ALLOY; RESISTANCE; SEAWATER; EIS; KINETICS;
D O I
10.1557/jmr.2018.86
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The effect of aging time on the corrosion behavior of 6005 Al alloys has been investigated in aerated 3.5% NaCl aqueous solution. The corrosion resistance of the alloy with different aging times is analyzed by measuring potentiodynamic polarization, electrochemical impedance spectroscopy. The surface morphology is examined by scanning electron microscopy. The results demonstrated that the corrosion resistance of the alloy in the peak-aged condition is worse than the other conditions. Accordingly, corrosion rate and the corrosion current density of the alloy reach its maximum value. An Fe-rich phase is identified as the beta-Al-4.5 FeSi phase by atomic-resolution high angle annular dark field scanning transmission electron microscopy and energy dispersive X-ray spectroscopy mapping analyses. The beta-Al4.5FeSi is wrapped slowly by the precipitates of Mg2Si from the process of the peak-aged condition to the over-aged condition. It is hypothesized that the change of corrosion behavior of the alloy may be attributed to the beta-Al4.5FeSi wrapped slowly by the precipitates of Mg2Si.
引用
收藏
页码:1830 / 1838
页数:9
相关论文
共 50 条
  • [41] The crystallographic orientation dependent anisotropic corrosion behavior of aluminum in 3.5 wt% NaCl solution
    Jin, Haini
    Sui, Yudong
    Yu, Xiaohua
    Feng, Jing
    Jiang, Yehua
    Wang, Qudong
    Sun, Wenwen
    JOURNAL OF ELECTROANALYTICAL CHEMISTRY, 2023, 946
  • [42] Corrosion Behavior of Pure Magnesium with Low Iron Content in 3.5 wt% NaCl Solution
    Yang, Lei
    Zhou, Xiaorong
    Curioni, Michele
    Pawar, Surajkumar
    Liu, Hong
    Fan, Zhongyun
    Scamans, Geoff
    Thompson, George
    JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 2015, 162 (07) : C362 - C368
  • [43] Corrosion behavior of as-cast Mg-5Sn based alloys with In additions in 3.5 wt% NaCl solution
    Wang, Xuejian
    Chen, Zongning
    Ren, Jing
    Kang, Huijun
    Guo, Enyu
    Li, Jiehua
    Wang, Tongmin
    CORROSION SCIENCE, 2020, 164 (164)
  • [44] Corrosion damage in frozen 3.5 wt.% NaCl solution
    Fu, Tian
    Song, Guang-Ling
    Zheng, Dajiang
    MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION, 2021, 72 (08): : 1396 - 1409
  • [45] The effect of ZnAl-LDHs-CO3 on the corrosion behaviour of Zn-5Al alloys in 3.5wt.% NaCl solution
    Huang, Qiuyu
    Wang, Youbin
    Zhou, Bingtao
    Wei, Yuezhou
    Gao, Feng
    Fujita, Toyohisa
    CORROSION SCIENCE, 2021, 179
  • [46] Effect of Gadolinium Content on the Corrosion Behavior of Magnesium Alloys in 1 wt.% NaCl Solution
    Zidane, N.
    Ait Albrimi, Y.
    Ait Addi, A.
    Ait Akbour, R.
    Douch, J.
    Nahle, A.
    Hamdani, M.
    PORTUGALIAE ELECTROCHIMICA ACTA, 2015, 33 (05) : 289 - 304
  • [47] Corrosion behaviors and mechanism of AlxCrFeMnCu high-entropy alloys in a 3.5 wt% NaCl solution
    Feng, Li
    Yang, Yang
    Zhao, Yanchun
    Ma, Kai
    Cui, Junpeng
    CORROSION SCIENCE, 2024, 233
  • [48] The effect of ZnAl-LDHs-CO3 on the corrosion behaviour of Zn-5Al alloys in 3.5wt.% NaCl solution
    Huang, Qiuyu
    Wang, Youbin
    Zhou, Bingtao
    Wei, Yuezhou
    Gao, Feng
    Fujita, Toyohisa
    Corrosion Science, 2021, 179
  • [49] Corrosion and electrochemical behavior of Mg-Y alloys in 3.5% NaCl solution
    Zhang, Xin
    Li, Yong-jun
    Zhang, Kui
    Wang, Chang-shun
    Li, Hong-wei
    Ma, Ming-long
    Zhang, Bao-dong
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2013, 23 (05) : 1226 - 1236
  • [50] Influence of Nd addition on the corrosion behavior of Zn-5%Al alloy in 3.5wt.% NaCl solution
    Cao, Zujun
    Kong, Gang
    Che, Chunshan
    Wang, Yanqi
    APPLIED SURFACE SCIENCE, 2017, 426 : 67 - 76