Model-based detection of soft faults using the smoothed residual for a control system

被引:8
|
作者
Liu, Jinxin [1 ,2 ]
Yang, Liangdong [1 ,2 ]
Xu, Maojun [1 ,2 ]
Zhang, Qian [1 ,2 ]
Yan, Ruqiang [1 ,2 ]
Chen, Xuefeng [1 ,2 ]
机构
[1] Xi An Jiao Tong Univ, Sch Mech Engn, Xian 710049, Peoples R China
[2] Xi An Jiao Tong Univ, State Key Lab Mfg Syst Engn, Xian 710054, Peoples R China
基金
中国国家自然科学基金;
关键词
soft fault; model-based detection; neural network; smoothed residual; NONLINEAR-SYSTEMS; DIAGNOSIS; IDENTIFICATION;
D O I
10.1088/1361-6501/abaf2b
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Soft faults are a very common failure mode in electro hydraulic servo control systems in aero engines, including component characteristic drift, performance degradation and so on. Traditional fault detection approaches for soft faults haveproblems of time delay, inaccuracy and false alarms. In order to solve these problems, a model-based detection approach for soft faults is proposed in this paper. Firstly, a robust, time-saving and reliable modeling method is proposed. This method utilizes a mechanism model and a data-driven correction model to characterize the main features and uncertain features of the practical system, respectively. The data-driven correction model is implemented by a backpropagation neural network, which adopts the input of the actual system and the output of the mechanism model as its training data, and adopts the output of the actual system as its training label. This neural correction model plays an important role in compensating for the deviation between the mechanism model and the practical system. Secondly, a robust fault observer, which is based on the residual between the measurement output of the practical system and the model output of the hybrid mechanism-neural network model, is designed to detect the soft fault. The squared residual is smoothed by a median exponential filter in order to eliminate the disturbances of impulsive interference or noises in measurement. Finally, the detection of soft faults is implemented by comparing the smoothed residual with a presetting threshold. Several simulations have been performed to verify the effectiveness of the proposed method, and the simulation results prove the advancement of the proposed method.
引用
收藏
页数:12
相关论文
共 50 条
  • [31] Model-based system engineering in control education using HIL simulators
    Cech, M.
    Goubej, M.
    Sobota, J.
    Visioli, A.
    IFAC PAPERSONLINE, 2020, 53 (02): : 17302 - 17307
  • [32] Detection of induction motor faults - Combining signal-based and model-based techniques
    Parlos, AG
    Kim, K
    Bharadwaj, R
    PROCEEDINGS OF THE 2002 AMERICAN CONTROL CONFERENCE, VOLS 1-6, 2002, 1-6 : 4531 - 4536
  • [33] Automotive engine fault detection and isolation using LSTM for model-based residual sequence classification
    Youssef, Mohammed
    Ibrahim, Hesham
    2021 18TH INTERNATIONAL CONFERENCE ON ELECTRICAL ENGINEERING, COMPUTING SCIENCE AND AUTOMATIC CONTROL (CCE 2021), 2021,
  • [34] Model-Based Tracking Control of a Soft Growing Robot for Colonoscopy
    Borvorntanajanya, Korn
    Treratanakulchai, Shen
    Baena, Ferdinando Rodriguez y
    Franco, Enrico
    IEEE TRANSACTIONS ON MEDICAL ROBOTICS AND BIONICS, 2024, 6 (04): : 1354 - 1362
  • [35] Discrete Cosserat Static Model-Based Control of Soft Manipulator
    Li, Haihong
    Xun, Lingxiao
    Zheng, Gang
    Renda, Federico
    IEEE ROBOTICS AND AUTOMATION LETTERS, 2023, 8 (03) : 1739 - 1746
  • [36] Model-based control system for pickling lines
    Doernemann, Annika G.
    Iron and Steel Engineer, 1997, 74 (01): : 47 - 50
  • [37] Model-based control of a handling system with SysML
    Brecher, Christian
    Nittinger, Johannes A.
    Karlberger, Andreas
    2013 CONFERENCE ON SYSTEMS ENGINEERING RESEARCH, 2013, 16 : 197 - 205
  • [38] Model-Based Fault Tolerant Control for Hybrid Dynamic Systems with Sensor Faults
    YANG Hao MAO ZeHui JIANG Bin College of Automation Engineering Nanjing University of Aeronautics and Astronautics Nanjing
    自动化学报, 2006, (05) : 680 - 685
  • [39] Model-based fault tolerant control for hybrid dynamic systems with sensor faults
    Yang, Hao
    Mao, Ze-Hui
    Jiang, Bin
    Zidonghua Xuebao/Acta Automatica Sinica, 2006, 32 (05): : 680 - 685
  • [40] Model-based fault detection using parity equations applied to a petrochemical system
    Khajali, Placeholder B.
    Poshtan, J.
    ICIAS 2007: INTERNATIONAL CONFERENCE ON INTELLIGENT & ADVANCED SYSTEMS, VOLS 1-3, PROCEEDINGS, 2007, : 1141 - 1146