Fabrication of 2D C/ZrC-SiC composite and its structural evolution under high-temperature treatment up to 1800 °C

被引：79

作者：

Li, Houbu ^{[1
]}

Zhang, Litong ^{[1
]}

Cheng, Laifei ^{[1
]}

Wang, Yiguang ^{[1
]}

机构：

[1] Northwestern Polytech Univ, Natl Key Lab Thermostruct Composite Mat, Xian 710072, Peoples R China

来源：

CERAMICS INTERNATIONAL | 2009年 / 35卷 / 07期

关键词：

Precursors: organic; Composites; Whiskers; Structural evolution; SILICON-CARBIDE WHISKERS; MATRIX COMPOSITES; SLURRY INFILTRATION; THERMAL-STABILITY; C/SIC COMPOSITES; GROWTH-MECHANISM; FIBER; POLYCARBOSILANE;

D O I：

10.1016/j.ceramint.2009.03.030

中图分类号：

TQ174 [陶瓷工业]; TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

Two-dimensional C/ZrC-SiC composites were fabricated by chemical vapor infiltration (CVI) process combined with a modified polymer infiltration and pyrolysis (PIP) method. Two kinds of ZrC slurries (ZrC aqueous slurry and ZrC/polycarbosilane slurry) were employed to densify composites before the PIP process. The as-produced C/ZrC-SiC composites exhibited better mechanical properties than the C/SiC composites densified only by CVI and PIP process. Structural evolution for C/ZrC-SiC composites treated in the range 1200-1800 degrees C mainly consisted of the change of SiC whiskers and the decomposition of polymer derived ceramic. (C) 2009 Elsevier Ltd and Techna Group S.r.l. All rights reserved.

引用

页码：2831 / 2836

页数：6

共 50 条

[31] Development of damage in a 2D woven C/SiC composite under mechanical loading .2. Ultrasonic characterization
ElBouazzaoui, R
Baste, S
Camus, G
COMPOSITES SCIENCE AND TECHNOLOGY, 1996, 56 (12) : 1373 - 1382
[32] Stressed oxidation behaviors of 2D C/SiC-BCx composite under wet oxygen atmosphere
Luan, Xin'gang
Liu, Yongsheng
Yang, Wenbin
Peng, Yuqing
Zhang, Litong
Cheng, Laifei
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2016, 36 (11) : 2673 - 2678
[33] Preparation and properties of 2D C/ZrB2-SiC ultra high temperature ceramic composites
Wang, Yiguang
Liu, Wen
Cheng, Laifei
Zhang, Litong
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2009, 524 (1-2): : 129 - 133
[34] Strengthening of 2D-C/SiC composite through creep with low stress and high temperature
Li, Meng
Zhang, Chengyu
Wang, Kejie
Zhang, Xiao
Wang, Xi
Han, Dong
Li, Mei
ADVANCES IN APPLIED CERAMICS, 2020, 119 (01) : 49 - 56
[35] Effect of heat treatment on the thermal expansion of 2D and 3D C/SiC composites from room temperature to 1400 °C
Cheng, LF
Xu, YD
Zhang, LT
Zhang, Q
CARBON, 2003, 41 (08) : 1666 - 1670
[36] High-temperature mechanical properties and microstructure of C/C-ZrC-SiC-ZrB2 composites prepared by a joint process of precursor infiltration and pyrolysis and slurry infiltration
Jia, Yan
Chen, Si'an
Li, Yong
Wang, Song
Hu, Haifeng
JOURNAL OF ALLOYS AND COMPOUNDS, 2019, 811
[37] High-temperature oxidation of ZrB2–SiC and ZrB2–SiC–ZrSi2 ceramics up to 1700°C in air
V. O. Lavrenko
A. D. Panasyuk
O. M. Grigorev
O. V. Koroteev
V. A. Kotenko
Powder Metallurgy and Metal Ceramics, 2012, 51 : 217 - 221
[38] Fabrication of ZrC particles and its formation mechanism by self-propagating high-temperature synthesis from Fe-Zr-C elemental powders
Zhang, M. X.
Hu, Q. D.
Huang, B.
Li, J. G.
JOURNAL OF ALLOYS AND COMPOUNDS, 2011, 509 (31) : 8120 - 8125
[39] Effect of Temperature on Stress Oxidation Behaviors of 2D C/SiC-BCx Composite in Wet Oxygen Atmosphere
Yongsheng Liu
Litong Zhang
Laifei Cheng
Wenbing Yang
Metallurgical and Materials Transactions A, 2014, 45 : 5699 - 5707
[40] Development of damage in a 2D woven C/SiC composite under mechanical loading .1. Mechanical characterization
Camus, G
Guillaumat, L
Baste, S
COMPOSITES SCIENCE AND TECHNOLOGY, 1996, 56 (12) : 1363 - 1372

← 1 2 3 4 5 →