Development of Thermal Barrier Coatings on AZ91 Magnesium Alloy Surface

被引：1
|
作者：
Gao, Peihu [1 ]
Li, Jianping [1 ]
Yang, Zhong [1 ]
Guo, Yongchun [1 ]
Wu, Yongxing [2 ]
Liu, Jilin [2 ]
Yang, Zhiling [3 ]
Wang, Yanrong [4 ]
机构：
[1] Xian Technol Univ, Sch Mat & Chem Engn, Xian 710021, Peoples R China
[2] PLA Represent Off, Datong 037036, Peoples R China
[3] Foundry North Gen Power Grp Co Ltd, Datong 037036, Peoples R China
[4] China North Engine Inst, Datong 037036, Peoples R China
来源：
ADVANCED MATERIALS AND PROCESSES III, PTS 1 AND 2 | 2013年 / 395-396卷
关键词：
Magnesium alloy; Thermal barrier coating; Microstructure; Coefficient of thermal expansion; GAS-TURBINE ENGINE; PROTECTIVE-COATINGS;
D O I：
10.4028/www.scientific.net/AMM.395-396.703
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
In this paper, MCrAlY bonding layer was prepared through high velocity-oxygen fuel spray on the AZ91 magnesium alloy surface. 8wt%YSZ ceramic layer was deposited on the surface of bonding layer through atmospheric plasma spraying. The coatings were characterized by XRD and SEM. The hardness of the coating was tested. The coefficients of thermal expansion of the coating were measured through TMA. It was found that there were un-melted 8YSZ particles surrounded by melted particles layer by layer. Parts of ZrO2 transited from cubic to tetragonal. The microhardness of the YSZ coating and bonding layer were 832.1Hv(0.3) and 700.3Hv(0.3), respectively. The coefficients of thermal expansion of the magnesium alloy, MCrAlY layer and YSZ coating were 42.46 x10(-6).k(-1), 15.26 x10(-6).k(-1), 9.28 x10(-6).k(-1), respectively. The bonding coat matched the magnesium alloy substrate and the YSZ coating well. The dimension of AZ91 magnesium alloy sample was very stabilized before and after coating deposition.
引用
收藏
页码：703 / +
页数：3
相关论文
共 50 条
  • [31] Preparation and corrosion resistance of rare earth conversion coatings on AZ91 magnesium alloy
    Xu, Y
    Chen, X
    Lü, ZS
    Li, YJ
    JOURNAL OF RARE EARTHS, 2005, 23 (05) : 555 - 558
  • [32] Effect of Gadolinium on the Microstructure of Magnesium Alloy AZ91
    Rapiejko, C.
    Mikusek, D.
    Just, P.
    Pacyniak, T.
    ARCHIVES OF FOUNDRY ENGINEERING, 2021, 21 (01) : 31 - 36
  • [33] Susceptibility of AZ91 magnesium alloy to pitting corrosion
    Polis-Olejniczak, Anna
    Malik, Marcin A.
    OCHRONA PRZED KOROZJA, 2009, 52 (11): : 572 - 572
  • [34] Influence of Cerium on Corrosion of AZ91 Magnesium Alloy
    刘生发
    康柳根
    刘林艳
    黄尚宇
    韩辉
    吕亚清
    JournalofRareEarths, 2006, (S2) : 222 - 227
  • [35] CRYSTALLOGRAPHY OF DIRECTIONALLY SOLIDIFIED MAGNESIUM ALLOY AZ91
    PETTERSEN, K
    RYUM, N
    METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1989, 20 (05): : 847 - 852
  • [36] Cryogenic and conventional milling of AZ91 magnesium alloy
    Vikas Marakini
    Srinivasa Pai P
    Gururaj Bolar
    Bhaskara P Achar
    JournalofMagnesiumandAlloys, 2024, 12 (06) : 2503 - 2519
  • [37] Corrosion characteristics of AZ91 magnesium alloy weldments
    Xu, R. Z.
    Song, G.
    Wang, Z.
    MATERIALS RESEARCH INNOVATIONS, 2009, 13 (04) : 441 - 447
  • [38] Cryogenic and conventional milling of AZ91 magnesium alloy
    Marakini, Vikas
    Pai, P. Srinivasa
    Bolar, Gururaj
    Achar, Bhaskara P.
    JOURNAL OF MAGNESIUM AND ALLOYS, 2024, 12 (06) : 2503 - 2519
  • [39] Cathodic anticorrosive protection of magnesium alloy AZ91
    Hadzima, B
    Palcek, P
    Chalupová, M
    Canády, R
    KOVOVE MATERIALY-METALLIC MATERIALS, 2003, 41 (04): : 257 - 269
  • [40] Creep of reinforced and unreinforced AZ91 magnesium alloy
    Sklenicka, V
    Pahutová, M
    Kucharová, K
    Svoboda, M
    Langdon, TG
    CREEP AND FRACTURE OF ENGINEERING MATERIALS AND STRUCTURES, 2000, 171-1 : 593 - 600
12345