Development of Thermal Barrier Coatings on AZ91 Magnesium Alloy Surface

被引：1
|
作者：
Gao, Peihu [1 ]
Li, Jianping [1 ]
Yang, Zhong [1 ]
Guo, Yongchun [1 ]
Wu, Yongxing [2 ]
Liu, Jilin [2 ]
Yang, Zhiling [3 ]
Wang, Yanrong [4 ]
机构：
[1] Xian Technol Univ, Sch Mat & Chem Engn, Xian 710021, Peoples R China
[2] PLA Represent Off, Datong 037036, Peoples R China
[3] Foundry North Gen Power Grp Co Ltd, Datong 037036, Peoples R China
[4] China North Engine Inst, Datong 037036, Peoples R China
来源：
ADVANCED MATERIALS AND PROCESSES III, PTS 1 AND 2 | 2013年 / 395-396卷
关键词：
Magnesium alloy; Thermal barrier coating; Microstructure; Coefficient of thermal expansion; GAS-TURBINE ENGINE; PROTECTIVE-COATINGS;
D O I：
10.4028/www.scientific.net/AMM.395-396.703
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
In this paper, MCrAlY bonding layer was prepared through high velocity-oxygen fuel spray on the AZ91 magnesium alloy surface. 8wt%YSZ ceramic layer was deposited on the surface of bonding layer through atmospheric plasma spraying. The coatings were characterized by XRD and SEM. The hardness of the coating was tested. The coefficients of thermal expansion of the coating were measured through TMA. It was found that there were un-melted 8YSZ particles surrounded by melted particles layer by layer. Parts of ZrO2 transited from cubic to tetragonal. The microhardness of the YSZ coating and bonding layer were 832.1Hv(0.3) and 700.3Hv(0.3), respectively. The coefficients of thermal expansion of the magnesium alloy, MCrAlY layer and YSZ coating were 42.46 x10(-6).k(-1), 15.26 x10(-6).k(-1), 9.28 x10(-6).k(-1), respectively. The bonding coat matched the magnesium alloy substrate and the YSZ coating well. The dimension of AZ91 magnesium alloy sample was very stabilized before and after coating deposition.
引用
收藏
页码：703 / +
页数：3
相关论文
共 50 条
  • [1] Surface modification of AZ91 magnesium alloy
    Luan, Benli
    Gray, Joy
    Yang, Lianxi
    Cheong, Woo-Jae
    Shoesmith, David
    2006 BIMW: 2006 BEIJING INTERNATIONAL MATERIALS WEEK, PTS 1-4: MAGNESIUM, 2007, 546-549 : 513 - +
  • [2] Surface modification of the AZ91 magnesium alloy
    Strzelecka, M.
    Iwaszko, J.
    Malik, M.
    Tomczynski, S.
    ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING, 2015, 15 (04) : 854 - 861
  • [3] Thermal Fatigue of Magnesium Base Alloy AZ91
    Krauss, Martin
    Scholtes, Berthold
    MATERIALS TESTING, 2009, 51 (05) : 295 - 298
  • [4] Cerium and Silane Conversion Coatings on AZ91 Magnesium Alloy
    Lu, Yanling
    Du, Shiguo
    Guo, Yi
    Chen, Yankun
    Hong, Qing
    MATERIALS PROCESSING TECHNOLOGIES, PTS 1 AND 2, 2011, 154-155 : 991 - 999
  • [5] SUPERPLASTICITY IN MAGNESIUM ALLOY AZ91
    SOLBERG, JK
    TORKLEP, J
    BAUGER, O
    GJESTLAND, H
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1991, 134 : 1201 - 1203
  • [6] Superplasticity of an AZ91 magnesium alloy
    Szaraz, Zoltan
    Trojanova, Zuzanka
    Ryspaev, Talant
    Wesling, Volker
    MATERIALS STRUCTURE & MICROMECHANICS OF FRACTURE V, 2008, 567-568 : 365 - +
  • [7] Thermal fatigue of magnesium-base alloy AZ91
    Krauss, M.
    Scholtes, B.
    MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK, 2008, 39 (08) : 562 - 570
  • [8] The effect of PVD coatings on the corrosion behaviour of AZ91 magnesium alloy
    Altun, Hikmet
    Sen, Sadri
    MATERIALS & DESIGN, 2006, 27 (10): : 1174 - 1179
  • [9] Microstructure and surface integrity of machined AZ91 magnesium alloy
    Asgari, A.
    Delavar, H.
    Sedighi, M.
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2023, 22 : 735 - 746
  • [10] Novel laser surface treatments on AZ91 magnesium alloy
    Taltavull, C.
    Torres, B.
    Lopez, A. J.
    Rodrigo, P.
    Rams, J.
    SURFACE & COATINGS TECHNOLOGY, 2013, 222 : 118 - 127
12345