A STUDY OF PARALLEL EFFICIENCY OF MODIFIED DIRECT ALGORITHM APPLIED TO THERMOHYDRODYNAMIC LUBRICATION

This study examines the parallel computing as a means to minimize the execution time ill the optimization applied to thermohydrodynamic (THD) lubrication. The objective of the optimization is to maximize the load capacity of a slider bearing with two design variables. A global optimization method, DIviding RECTangle (DIRECT) algorithm, is used. The first approach was to apply the parallel computing within the THD model in a shared-memory processing (SMP) environment to examine the parallel efficiency of fine-grain computation. Next, a distributed parallel computing in the search level was conducted by use of the standard DIRECT algorithm. Then, the algorithm is modified to provide a version suitable for effective parallel computing. Ill the latter coarse-grain computation the speedups obtained by the DIRECT algorithms are compared with some previous Studies using other parallel optimization methods. In the fine-grain computation of the SMP machine, the communication and overhead time costs prohibit high speedup in the cases of four or more simultaneous threads. It is found that the standard DIRECT algorithm is all efficient sequential but less parallel-computing-friendly method. When the modified algorithm is used in the slider bearing optimization, a parallel efficiency of 96.3% is obtained in the 16-computing-node cluster. This study presents the modified DIRECT algorithm, in efficient parallel search method, for general engineering optimization problems.