Reduction of the Starting Losses of the Wound Rotor Induction Machine

被引：0

作者：

Ivanov, Sergiu ^{[1
]}

Radulescu, Mihai ^{[2
]}

机构：

[1] Univ Craiova, Craiova, Romania

[2] INDA Craiova, Craiova, Romania

来源：

PROCEEDINGS OF THE 13TH INTERNATIONAL CONFERENCE ON OPTIMIZATION OF ELECTRICAL AND ELECTRONIC EQUIPMENT, VOLS 1-5 | 2012年

关键词：

MOTOR; DRIVE;

D O I：

暂无

中图分类号：

TM [电工技术]; TN [电子技术、通信技术];

学科分类号：

0808 ; 0809 ;

摘要：

Wound rotor induction motors are used in heavy duty drives in the range of hundreds kW, like cement and minerals industries. Important users make use of hundred of such drives, summing hundreds of MW. Despite their technical capabilities to easily operate at variable speed, the large amount of losses which occur at low speeds determine the users to use the facility given by the wound rotor only for starting. Even so, the losses specific to the additional rotor resistors are quite important, given the range of power. The paper discusses the existing technologies involved in the variable speed drives based on wound rotor induction machines and proposes a technique for starting which avoids the use of additional rotor resistors and consequently it eliminates the corresponding losses. The simulations confirm the viability of the technique.

引用

页码：466 / 471

页数：6

共 50 条

[31] Accurate Rotor Fault Detection in Doubly-Fed Wound-Rotor Induction Machine
Gritli, Y.
Tani, A.
Rossi, C.
Casadei, D.
Filippetti, F.
2017 6TH INTERNATIONAL CONFERENCE ON CLEAN ELECTRICAL POWER (ICCEP): RENEWABLE ENERGY IMPACT, 2017, : 756 - 760
[32] Sensorless Starting of Wound Rotor Synchronous Machines
Fadel, Maurice
Caux, Stephane
Borghetti, Giovani
Postiglione, Gianluca
2019 21ST EUROPEAN CONFERENCE ON POWER ELECTRONICS AND APPLICATIONS (EPE '19 ECCE EUROPE), 2019,
[33] STARTING CONTROL OF WOUND-ROTOR INDUCTION-MOTORS BY USING CHOPPER-CONTROLLED RESISTANCE IN ROTOR CIRCUIT
MOO, CS
WEI, CC
HUANG, CL
CHEN, CS
CONFERENCE RECORD OF THE 1989 IEEE INDUSTRY APPLICATIONS SOCIETY ANNUAL MEETING, PTS 1-2, 1989, : 2295 - 2300
[34] Modeling Iron, Mechanical and Rotor Copper Losses in Induction Machine with the Design of Experiments
Chrin, P.
David, M.
Maussion, P.
Saint-Michel, J.
Fournier, E.
Bun, L.
IECON 2014 - 40TH ANNUAL CONFERENCE OF THE IEEE INDUSTRIAL ELECTRONICS SOCIETY, 2014, : 729 - 735
[35] Torque Ripple Reduction in Double-Inverter Fed Wound Rotor Induction Machine Drives Using PWM Techniques
Bajjuri, Nikhil Krishna
Jain, Amit Kumar
IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, 2019, 66 (06) : 4250 - 4261
[36] Minimization of Current Ripple and Switching Losses in Double-Inverter Fed Wound Rotor Induction Machine Drive Using PWM Techniques
Bajjuri, Nikhil Krishna
Jain, Amit Kumar
IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, 2020, 67 (05) : 3484 - 3495
[37] New topology for soft starting and speed regulation of wound rotor asynchronous machine controlled by microprocessor
Shoihet, A
Slonim, MA
JOURNAL OF CIRCUITS SYSTEMS AND COMPUTERS, 2004, 13 (04) : 929 - 939
[38] Modified Model Reference Adaptive Observer for Rotor Speed and Position Estimation in Wound Rotor Induction Machine
Nair, Ramu R.
Narayanan, G.
2017 IEEE PES ASIA-PACIFIC POWER AND ENERGY ENGINEERING CONFERENCE (APPEEC), 2017,
[39] Contribution to Wind Turbine Emulation Based on Wound Rotor Induction Machine Configuration
Kia, Shahin Hedayati
Henao, Humberto
Capolino, Gerard-Andre
Marzebali, Mohammad Hoseintabar
2018 IEEE INTERNATIONAL CONFERENCE ON INDUSTRIAL TECHNOLOGY (ICIT), 2018, : 2028 - 2034
[40] Application of new type secondary resistance for the wound rotor type induction machine
Ikeda, Masahiro
2007 INTERNATIONAL CONFERENCE ON ELECTRICAL MACHINES AND SYSTEMS, VOLS 1-4, 2007, : 71 - 75

← 1 2 3 4 5 →