Effect of shot peening on surface properties of Al7075 hybrid aluminum metal matrix composites

被引：5
|
作者：
Sasikumar, K. S. K. [1 ]
Dineshkumar, K. [1 ]
Deeban, K. [1 ]
Sambathkumar, M. [1 ]
Saravanan, N. [2 ]
机构：
[1] Kongu Engn Coll, Dept Mech Engn, Perundurai 638060, India
[2] KS Rangasamy Coll Technol, Dept Mechatron Engn, Tiruchengode 637215, India
来源：
MATERIALS TODAY-PROCEEDINGS | 2020年 / 33卷
关键词：
AL7075 aluminium alloy; Shot peening; Micro hardness; Surface roughness; MECHANICAL-PROPERTIES; WEAR BEHAVIOR; SPEED;
D O I：
10.1016/j.matpr.2020.02.676
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Various fields of engineering such as automobile, aerospace and construction industries are employs Aluminum alloys and its composites due to its high strength to weight ratio. But they possess poor wear resistance due to low hardness. In this research, shot peening treatment is used to enhance the wear resistance ability of the composites. Micro hardness and surface roughness of AL7075 Hybrid metal matrix composites are examined after shot peening treatment. For this, the aluminum alloy specimens are subjected to shot peening for 30, 60, 90, 120 and 150 s time. The results reveal that the shot peening treatment increases micro -hardness and surface roughness up to 90 s. The specimen after 120 s peening demonstrates the marginal improvement in micro hardness and slight reduction in surface roughness. (C) 2019 Elsevier Ltd. All rights reserved.
引用
收藏
页码：2792 / 2794
页数：3
相关论文
共 50 条
  • [41] The effect of sintering parameters and MgO ratio on structural properties in Al7075/MgO composites: a review
    Pul, Muharrem
    Erdem, Umit
    Turkoz, Mustafa Burak
    Yildirim, Gurcan
    JOURNAL OF MATERIALS SCIENCE, 2023, 58 (02) : 664 - 684
  • [42] Mechanical behaviour of al7075 hybrid composites developed through squeeze casting
    Gopal V.
    Raja D.M.R.
    Mayakrishnan J.
    Hariram V.
    International Journal of Vehicle Structures and Systems, 2021, 13 (03) : 314 - 318
  • [43] The Effect of Rolling and Aging on Mechanical and Tribological Properties in B4C Particle Reinforced Al7075 Matrix Composites
    Mehmet Emin Demir
    Yahya Hışman Çelik
    Ali Kalkanli
    Arabian Journal for Science and Engineering, 2022, 47 : 16187 - 16208
  • [44] The Effect of Rolling and Aging on Mechanical and Tribological Properties in B4C Particle Reinforced Al7075 Matrix Composites
    Demir, Mehmet Emin
    Celik, Yahya Hisman
    Kalkanli, Ali
    ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING, 2022, 47 (12) : 16187 - 16208
  • [45] Thermal analysis on Al7075/Al2O3 metal matrix composites fabricated by stir casting process
    Jacob, S.
    Shajin, S.
    Gnanavel, C.
    INTERNATIONAL CONFERENCE ON EMERGING TRENDS IN ENGINEERING RESEARCH, 2017, 183
  • [46] Wear resistance of basalt particulate-reinforced stir-cast Al7075 metal matrix composites
    M. Ayyanar Raja
    V. Manikandan
    P. Amuthakkannan
    S. Rajesh
    I. Balasubramanian
    Journal of the Australian Ceramic Society, 2018, 54 : 119 - 128
  • [47] The effect of sintering parameters and MgO ratio on structural properties in Al7075/MgO composites: a review
    Muharrem Pul
    Umit Erdem
    Mustafa Burak Turkoz
    Gürcan Yildirim
    Journal of Materials Science, 2023, 58 : 664 - 684
  • [48] Experimental Investigations on the Development of Hybrid Metal Matrix Composite of Al7075 on Microstructural, Mechanical, and Dry Sliding Aspects
    Lovevanshi, Bhagwan Singh
    Soni, P. K.
    Dixit, Savita
    JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME, 2024, 146 (05):
  • [49] Experimental Investigations on the Development of Hybrid Metal Matrix Composite of Al7075 on Microstructural, Mechanical, and Dry Sliding Aspects
    Lovevanshi B.S.
    Soni P.K.
    Dixit S.
    Journal of Tribology, 2024, 146 (05)
  • [50] Effect of joint design on mechanical properties of AL7075 weldment
    Li, LJ
    Orme, K
    Yu, WB
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2005, 14 (03) : 322 - 326
12345