Kinetics of curing process in carbon/epoxy nano-composites

被引：10
|
作者：
Abenojar, J. [1 ,2 ]
del Real, J. C. [2 ]
Ballesteros, Y. [2 ]
Martinez, M. A. [1 ]
机构：
[1] Univ Carlos III Madrid, Mat Sci & Engn Dept, Alvaro Alonso Barba Inst, Av Univ 30, Leganes 28911, Spain
[2] Univ Pontificia Comillas, Mech Engn Dept, Technol Res Inst, C Alberto Aguilera 25, Madrid 28015, Spain
来源：
2018 5TH GLOBAL CONFERENCE ON POLYMER AND COMPOSITE MATERIALS (PCM 2018) | 2018年 / 369卷
关键词：
EPOXY-RESIN; ADHESIVE JOINTS; CURE KINETICS; MECHANISM; NANOCOMPOSITES; WEAR;
D O I：
10.1088/1757-899X/369/1/012011
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Epoxy resins are routinely used as adhesives, coatings, encapsulates, casting materials, and as matrix in composites. Their high crosslinking supposes too much rigidity, resulting in low toughness. Nano-filled addition could modify toughness, but it could also modify the curing process of the resin. Quality requirements of nano-composite (NC) imply a control of their curing process to ensure the mechanical properties of the material. Therefore, the aim of this work is to study the influence of carbon-based nano-fillers in the kinetics of curing of an epoxy resin. Three different methods are used in this work, Kissinger, Kamal and Model Free (MFK). The methods are complementary and provide information on the curing process of the nano-composites.
引用
收藏
页数：7
相关论文
共 50 条
  • [41] Polyisoprene-carbon nano-composites for application in multifunctional sensors
    Knite, Maris
    Klemenok, Igors
    Shakale, Gita
    Teteris, Valdis
    Zicans, Janis
    Journal of Alloys and Compounds, 2007, 434-435 (SPEC. ISS.): : 850 - 853
  • [42] Dielectric properties and corona resistance of Si-B/epoxy nano-composites
    Wei Zhao
    Yong Fan
    Hao Chen
    Journal of Materials Science: Materials in Electronics, 2019, 30 : 16298 - 16307
  • [43] A study on the resistance performance of epoxy nano-composites under the vacuum ultraviolet irradiation
    Liu, Yang
    Li, Guo-hui
    Jiang, Li-xiang
    ACTA ASTRONAUTICA, 2008, 63 (11-12) : 1343 - 1349
  • [44] Study on Polarization and Depolarization Characteristics of Epoxy/BaTiO3 Nano-composites
    Liu, Jingyi
    Li, Zhonghua
    Han, Yongsen
    Sun, Yunlong
    2019 2ND INTERNATIONAL CONFERENCE ON ELECTRICAL MATERIALS AND POWER EQUIPMENT (ICEMPE 2019), 2019, : 305 - 308
  • [45] Mechanical Properties and Creep Behavior of Carbon Fiber Nano-Composites
    Li, Yi-Luen
    Chen, Wei-Jen
    Shen, Ming-Yuan
    Chiang, Chin-Lung
    Yip, Ming-Chuen
    FUNDAMENTAL OF CHEMICAL ENGINEERING, PTS 1-3, 2011, 233-235 : 2794 - +
  • [46] The reinforcement of ancient timber-joints with carbon nano-composites
    Cestari, Clara Bertolini
    Invernizzi, Stefano
    Marzi, Tanja
    Tulliani, Jean-Marc
    MECCANICA, 2013, 48 (08) : 1925 - 1935
  • [47] Dielectric properties and corona resistance of Si-B/epoxy nano-composites
    Zhao, Wei
    Fan, Yong
    Chen, Hao
    JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS, 2019, 30 (17) : 16298 - 16307
  • [48] Sensing the Thermal Aging of Epoxy Alumina Nano-Composites Using Electric Modulus
    Maur, Subhajit
    Chatterjee, Soumya
    Haque, Nasirul
    Preetha, P.
    Dalai, Sovan
    Chatterjee, Biswendu
    IEEE SENSORS JOURNAL, 2021, 21 (10) : 12236 - 12244
  • [49] THERMAL PROPERTIES OF NANO-COMPOSITES: A COMPARATIVE STUDY BETWEEN EPOXY/GRAPHENE AND EPOXY/CaCO3
    Mohammed, Tawfeeq W.
    Rahmah, Nisreen M.
    Jawad, Lamyaa A.
    JOURNAL OF ENGINEERING SCIENCE AND TECHNOLOGY, 2023, 18 (01): : 424 - 436
  • [50] Experimental study on process of carbon fiber composites based on high temperature epoxy system curing
    Liu, Mingfan
    Tong, Zhipei
    Gao, Lei
    Zhang, Peng
    Cheng, Yongqi
    Sun, Yousong
    2018 THE 6TH INTERNATIONAL CONFERENCE ON MECHANICAL ENGINEERING, MATERIALS SCIENCE AND CIVIL ENGINEERING, 2019, 542
12345