Effect of rolling process on fatigue performance of stir zone of AA6061-T6 doube-side friction stir welding joint

被引：4

作者：

Du, Chengchao ^{[1
]}

Pan, Qiuhong ^{[1
]}

Chen, Shujin ^{[2
]}

Tian, Shuang ^{[3
]}

机构：

[1] Jiangsu Univ, Sch Mat Sci & Engn, Zhenjiang 212013, Jiangsu, Peoples R China

[2] Jiangsu Univ Sci & Technol, Sch Mat Sci & Engn, Zhenjiang, Jiangsu, Peoples R China

[3] Southeast Univ, Sch Mat Sci & Engn, Nanjing, Peoples R China

来源：

FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES | 2021年 / 44卷 / 03期

关键词：

fatigue; fracture; friction stir welding; lamellar structure; rolling; MECHANICAL-PROPERTIES; ALUMINUM-ALLOY; ULTRASONIC VIBRATIONS; CRACK INITIATION; GRAIN ROTATION; MICROSTRUCTURE; BEHAVIOR; SURFACE; STRESS; GROWTH;

D O I：

10.1111/ffe.13391

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

Stir zone (SZ) of AA6061-T6 double-side friction stir welding (DS-FSW) joint with a thickness of 6 mm had a poor fatigue performance compared with that of base metal (BM). The rolling process was employed to improve the fatigue performance of SZ. The results showed that rolling process increased the dislocation density in SZ and remarkably enhanced its fatigue performance. The crack initiation played a key role in the fatigue performance of SZ. It relied on the debonding of lamellar structure in SZ. The debonding of lamellar structure depended on the cracking of fine grain layer in lamellar structure.

引用

页码：748 / 761

页数：14

共 50 条

[41] Microstructure and mechanical characteristics of AA6061-T6 joints produced by friction stir welding, friction stir vibration welding and tungsten inert gas welding: A comparative study
Bagheri, Behrouz
Abbasi, Mahmoud
Abdollahzadeh, Amin
INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS, 2021, 28 (03) : 450 - 461
[42] Modelling and optimization of submerged friction stir welding parameters for AA6061-T6 alloy using RSM
Rathinasuriyan, C.
Kumar, V. S. Senthil
KOVOVE MATERIALY-METALLIC MATERIALS, 2016, 54 (04): : 297 - 304
[43] Friction Stir Welding Parameters Development of AA6061-T6 Extruded Alloy Using a Bobbin Tool
Tinguery, Kenza Marianne Sipereh
Rahem, Ahmed
Nadeau, Francois
Fafard, Mario
15TH INTERNATIONAL ALUMINIUM CONFERENCE, INALCO 2023, 2023,
[44] Effect of Friction Stir Welding Process Parameters on Microstructure and Mechanical Properties of Dissimilar AA6061-T6 and AA7075-T6 Aluminum Alloy Joints
Saravanan V.
Rajakumar S.
Muruganandam A.
Metallography, Microstructure, and Analysis, 2016, 5 (6) : 476 - 485
[45] Impact of the novel square wave tool path pattern on AA6061-T6 friction stir welding
Jayaseelan, V
Jayabalakrishnan, D.
Gandhi, Ashok R.
Muthuramalingam, T.
Xavier, J. Francis
MATERIALS AND MANUFACTURING PROCESSES, 2022, 37 (08) : 886 - 895
[46] Radiography and Corrosion Analysis of Sub-merged Friction Stir Welding of AA6061-T6 alloy
Rathinasuriyan, C.
Kumar, V. S. Senthil
Shanbhag, Avin Ganapathi
12TH GLOBAL CONGRESS ON MANUFACTURING AND MANAGEMENT (GCMM - 2014), 2014, 97 : 810 - 818
[47] Effect of tool rotation and welding speed on microstructural and mechanical properties of dissimilar AA6061-T6 and AA5083-H12 joint in friction stir welding
Nishant, Sanjay Kumar
Prakash, Prashant
INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, 2024, 115 (11-12) : 1008 - 1017
[48] Prediction of tensile strength of friction stir welded stir cast AA6061-T6/AlNp composite
Murugan, N.
Kumar, B. Ashok
MATERIALS & DESIGN, 2013, 51 : 998 - 1007
[49] Optimization of process parameters in friction stir welding of dissimilar aluminum alloys (AA6061-T6 and AA5052-H32)
Heramo, Wondu Tesfaye
Workneh, Henok Zewdu
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2023, 129 (9-10): : 4473 - 4489
[50] Modeling and analysis of effect of tool geometry on temperature distribution and material flow in friction stir welding of AA6061-T6
Manoj Kumar
Ramesh Kumar
Sachin D. Kore
Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2022, 44

← 1 2 3 4 5 →