Fatigue crack initiation and propagation in a PM-gear tooth root

被引：12
|
作者：
Ignatijev, Aljaz [1 ]
Necemer, Branko [1 ]
Kramberger, Janez [1 ]
Glodez, Srecko [1 ]
机构：
[1] Univ Maribor, Fac Mech Engn, Smetanova 17, Maribor 2000, Slovenia
来源：
ENGINEERING FAILURE ANALYSIS | 2022年 / 138卷
关键词：
Sintered gears; Crack initiation; Crack propagation; Numerical analysis; Stress Intensity Factor; POROUS SINTERED METALS; DAMAGE EVOLUTION; CONTACT FATIGUE; HARDENED STEELS; MODEL; FRACTURE;
D O I：
10.1016/j.engfailanal.2022.106355
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
A computational model for the determination of the fatigue life of sintered gears is presented in this study. The total fatigue life of sintered gear, N, is divided into the crack initiation life, Ni, and crack propagation life, Np. The number of cycles for crack initiation in a gear tooth root, Ni, is determined by using the strain-life approach and the low-cycle fatigue parameters of the sintered gear material available in the literature. The number of cycles for crack propagation, Np, to a critical length is obtained by using the simple Paris law and the material parameters taken from the authors' previous work. The comprehensive computational analyses in the framework of the Ansys-software were performed to obtain the strain-stress field in a gear tooth root, and to determine the stress intensity factor at the crack tip. The numerical results were compared with the experimental data available in the literature.
引用
收藏
页数：10
相关论文
共 50 条
  • [31] EXAMINATION OF ROUND OFF TREATMENT OF A CRACK AT THE TOOTH ROOT OF GEAR
    SASAKI, S
    TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1985, 71 : 1109 - 1109
  • [32] Crack identification in gear tooth root using adaptive analysis
    Belsak, Ales
    Flasker, Joze
    ADVANCES IN FRACTURE AND DAMAGE MECHANICS VI, 2007, 348-349 : 697 - +
  • [33] Evaluation of the service life of gear in regard to bending fatigue in a gear tooth root
    Glodez, S
    Abersek, B
    Flasker, J
    Kramberger, J
    ADVANCES IN FRACTURE AND DAMAGE MECHANICS, 2003, 251-2 : 297 - 302
  • [34] Dynamic simulation of spur gear with tooth root crack propagating along tooth width and crack depth
    Chen, Zaigang
    Shao, Yimin
    ENGINEERING FAILURE ANALYSIS, 2011, 18 (08) : 2149 - 2164
  • [35] The effects of localized gear tooth damage on the gear dynamics - a comparison of the effect of a gear tooth root crack and a spall on the gear transmission error
    Endo, H
    Randall, RB
    Gosselin, C
    VIBRATIONS IN ROTATING MACHINERY, 2004, 2004 (02): : 333 - 342
  • [36] CRACK-PROPAGATION IN TOOTH ROOT WITH VARIABLE LOADING
    FLASKER, J
    PEHAN, S
    COMMUNICATIONS IN NUMERICAL METHODS IN ENGINEERING, 1993, 9 (02): : 103 - 110
  • [37] Vibration analysis of gears with fatigue crack in tooth root
    Belsak, Ales
    Flasker, Joze
    FRACTURE AND DAMAGE MECHANICS V, PTS 1 AND 2, 2006, 324-325 : 835 - +
  • [38] Comparison of numerical models for gear tooth root fatigue assessments
    Jelaska, Damir T.
    Podrug, Srdjan
    Glodez, Srecko
    Recent Advances in Solids and Structures - 2005, 2005, 493 : 77 - 84
  • [39] FATIGUE CRACK PROPAGATION ANALYSIS OF GEAR TOOTH UNDER VARIOUS LOAD CONDITIONS AND REPAIRED WITH BORON/EPDXY PATCH
    Ghaffari, Mir Ali
    Xiao, Shaoping
    PROCEEDINGS OF THE ASME POWER CONFERENCE, 2013, VOL 2, 2014,
  • [40] Fatigue Assessment of Weld Ends Considering Crack Initiation and Crack Propagation
    Waterkotte, Ralf
    Baumgartner, Joerg
    Ai, Qingfeng
    MATERIALS TESTING, 2013, 55 (7-8) : 529 - 536
12345