A comprehensive model of a novel rotating spool compressor

被引：19
|
作者：
Bradshaw, Craig R. [1 ]
Groll, Eckhard A. [2 ]
机构：
[1] Torad Engn, Alpharetta, GA 30004 USA
[2] Purdue Univ, Herrick Labs, W Lafayette, IN 47907 USA
来源：
INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID | 2013年 / 36卷 / 07期
关键词：
Spool compressor; Comprehensive model; Novel compressor; Geometry model; ROTARY-COMPRESSOR;
D O I：
10.1016/j.ijrefrig.2013.07.004
中图分类号：
O414.1 [热力学];
学科分类号：
摘要：
A comprehensive simulation model of a novel rotating spool compressor is presented. The spool compressor provides a new rotary compression mechanism with easily manufactured components. A detailed analytical geometry model of the spool compressor is presented, which includes the geometry of the vane. This geometry model is included in an overall comprehensive compressor model that includes sub-models for friction, leakage, and heat transfer. The results of the comprehensive model were validated using experimental data from a prototype compressor. The prototype compressor has an overall displacement of 23.9 cm(3), and was operated using R410A as the working fluid. The model predicts the volumetric efficiency, discharge temperature, and shaft power of the prototype compressor to within 3.13% MAE, 16.5 K and -13.2 W average deviation, respectively. The trends and spread in the data indicate that additional effort should be focused on the operation of the active sealing elements within the compressor. (C) 2013 Elsevier Ltd and IIR. All rights reserved.
引用
收藏
页码：1974 / 1981
页数：8
相关论文
共 50 条
  • [11] Robust stabilization of a centrifugal compressor with spool dynamics
    Liaw, DC
    Song, CC
    Huang, JT
    IEEE TRANSACTIONS ON CONTROL SYSTEMS TECHNOLOGY, 2004, 12 (06) : 966 - 972
  • [12] Robust stabilization of a centrifugal compressor with spool dynamic's
    Liaw, DC
    Song, CC
    Huang, JT
    PROCEEDINGS OF THE 2002 AMERICAN CONTROL CONFERENCE, VOLS 1-6, 2002, 1-6 : 3301 - 3306
  • [13] Pressing of compressor drum-spool peripheral dovetail slot
    Hu, Huijin
    Hangkong Zhizao Gongcheng/Aviation Production Engineering, 1996, (01):
  • [14] MODEL OF DEVELOPMENT OF ROTATING FAILURE IN AN AXIAL COMPRESSOR STAGE.
    Zhokhov, V.L.
    Soviet energy technology, 1986, (04): : 31 - 35
  • [15] Hysteresis behaviors of compressor rotating stall with cusp catastrophic model
    PAN, Tianyu (pantianyu@buaa.edu.cn), 1600, Chinese Journal of Aeronautics (31):
  • [16] Hysteresis behaviors of compressor rotating stall with cusp catastrophic model
    Li, Zhiping
    Zhang, Peng
    Pan, Tianyu
    Li, Qiushi
    Zhang, Jian
    CHINESE JOURNAL OF AERONAUTICS, 2018, 31 (05) : 1075 - 1084
  • [17] Hysteresis behaviors of compressor rotating stall with cusp catastrophic model
    Zhiping LI
    Peng ZHANG
    Tianyu PAN
    Qiushi LI
    Jian ZHANG
    Chinese Journal of Aeronautics, 2018, 31 (05) : 1075 - 1084
  • [18] Hysteresis behaviors of compressor rotating stall with cusp catastrophic model
    Zhiping LI
    Peng ZHANG
    Tianyu PAN
    Qiushi LI
    Jian ZHANG
    Chinese Journal of Aeronautics , 2018, (05) : 1075 - 1084
  • [19] Experimental and model investigation of the correlation between rotating inlet distortion and rotating stall of an axial compressor
    Institute of Engineering Thermophysics, Chinese Acad. of Sci., Beijing 100080, China
    不详
    不详
    Kung Cheng Je Wu Li Hsueh Pao, 2007, 2 (229-231):
  • [20] SURGE DYNAMICS IN A FREE-SPOOL CENTRIFUGAL-COMPRESSOR SYSTEM
    FINK, DA
    CUMPSTY, NA
    GREITZER, EM
    JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME, 1992, 114 (02): : 321 - 332
12345