Growth of TiO2 Thin Films by High Energy Milling Assisted Pulsed Laser Deposition Method

被引：0

作者：

Subagio, Agus ^{[1
]}

Budi, Wahyu Setia ^{[1
]}

Nurhasanah, Iis ^{[1
]}

Sudarji ^{[2
]}

Marhendrajaya, Indras ^{[1
]}

机构：

[1] Diponegoro Univ, Fac Sci & Math, Phys Dept, Semarang, Indonesia

[2] Diponegoro Univ, Fac Sci & Math, Alumnus Phys Dept, Semarang, Indonesia

来源：

ADVANCED SCIENCE LETTERS | 2017年 / 23卷 / 07期

关键词：

TiO2; HEM-PLD; Milling Treatment; Thin Film;

D O I：

10.1166/asl.2017.9688

中图分类号：

O [数理科学和化学]; P [天文学、地球科学]; Q [生物科学]; N [自然科学总论];

学科分类号：

07 ; 0710 ; 09 ;

摘要：

TiO2 thin film can be deposited on the silicon substrate using pulse laser deposition method. To prove homogeneity of grain size on surface, this study uses milling treatment for TiO2 powder before it is deposited. Milling treatment was conducted on samples of commercial TiO2 powder with high energy milling method. The variation of milling time was 0, 1, 3 and 6 hours. Furthermore, the samples were shaped as disc with diameter of 1 cm and used as a target source in growth of thin film. Variations in time for the milling treatment of the TiO2 powder has no effect on the phase change, but rather on the homogeneity of grain size on a thin layer of TiO2. In this study, the optimum milling time to produce a homogeneous grain size of a thin layer of TiO2 for 3 hours.

引用

页码：6582 / 6584

页数：3

共 50 条

[31] Preparation of Bi:TiO2 thin films by an hybrid deposition configuration: pulsed laser deposition and thermal evaporation
Escobar-Alarcon, L.
Solis-Casados, D. A.
Perez-Alvarez, J.
Romero, S.
Morales-Mendez, J. G.
Haro-Poniatowski, E.
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING, 2014, 117 (01): : 31 - 35
[32] Preparation of Bi:TiO2 thin films by an hybrid deposition configuration: pulsed laser deposition and thermal evaporation
L. Escobar-Alarcón
D. A. Solís-Casados
J. Perez-Alvarez
S. Romero
J. G. Morales-Mendez
E. Haro-Poniatowski
Applied Physics A, 2014, 117 : 31 - 35
[33] Femtosecond pulsed laser deposition of nanostructured TiO2 films in atmosphere
Gao, Bingpan
Zhang, Shengkong
Ju, Xuewei
Lin, Yanzhang
Wang, Xiangfeng
AIP ADVANCES, 2017, 7 (09):
[34] Characterization of epitaxial TiO2 films prepared by pulsed laser deposition
Yamamoto, S
Sumita, T
Yamaki, T
Miyashita, A
Naramoto, H
JOURNAL OF CRYSTAL GROWTH, 2002, 237 : 569 - 573
[35] Preparation of epitaxial TiO2 films by pulsed laser deposition technique
Yamamoto, S
Sumita, T
Sugiharuto
Miyashita, A
Naramoto, H
THIN SOLID FILMS, 2001, 401 (1-2) : 88 - 93
[36] Preparation of rutile TiO2 thin films by laser chemical vapor deposition method
Guo, Dongyun
Ito, Akihiko
Goto, Takashi
Tu, Rong
Wang, Chuanbin
Shen, Qiang
Zhang, Lianmeng
JOURNAL OF ADVANCED CERAMICS, 2013, 2 (02) : 162 - 166
[37] Structural properties of TiO2 films grown by pulsed laser deposition
Yoon, HS
Kim, SK
Im, HS
BULLETIN OF THE KOREAN CHEMICAL SOCIETY, 1997, 18 (06) : 640 - 643
[38] TiO2 nanoparticle thin film deposition by matrix assisted pulsed laser evaporation for sensing applications
Caricato, A. P.
Capone, S.
Ciccarella, G.
Martino, M.
Rella, R.
Romano, F.
Spadavecchia, J.
Taurino, A.
Tunno, T.
Valerini, D.
APPLIED SURFACE SCIENCE, 2007, 253 (19) : 7937 - 7941
[39] Growth of piezoelectric thin films with fine grain microstructure by high energy pulsed laser deposition
Craciun, F.
Verardi, P.
Dinescu, M.
Galassi, C.
Costa, A.
Sensors and Actuators, A: Physical, 1999, 74 (01): : 35 - 40
[40] Growth of piezoelectric thin films with fine grain microstructure by high energy pulsed laser deposition
Craciun, F
Verardi, P
Dinescu, M
Galassi, C
Costa, A
SENSORS AND ACTUATORS A-PHYSICAL, 1999, 74 (1-3) : 35 - 40

← 1 2 3 4 5 →