Growth of TiO2 Thin Films by High Energy Milling Assisted Pulsed Laser Deposition Method

被引：0
|
作者：
Subagio, Agus [1 ]
Budi, Wahyu Setia [1 ]
Nurhasanah, Iis [1 ]
Sudarji [2 ]
Marhendrajaya, Indras [1 ]
机构：
[1] Diponegoro Univ, Fac Sci & Math, Phys Dept, Semarang, Indonesia
[2] Diponegoro Univ, Fac Sci & Math, Alumnus Phys Dept, Semarang, Indonesia
来源：
ADVANCED SCIENCE LETTERS | 2017年 / 23卷 / 07期
关键词：
TiO2; HEM-PLD; Milling Treatment; Thin Film;
D O I：
10.1166/asl.2017.9688
中图分类号：
O [数理科学和化学]; P [天文学、地球科学]; Q [生物科学]; N [自然科学总论];
学科分类号：
07 ; 0710 ; 09 ;
摘要：
TiO2 thin film can be deposited on the silicon substrate using pulse laser deposition method. To prove homogeneity of grain size on surface, this study uses milling treatment for TiO2 powder before it is deposited. Milling treatment was conducted on samples of commercial TiO2 powder with high energy milling method. The variation of milling time was 0, 1, 3 and 6 hours. Furthermore, the samples were shaped as disc with diameter of 1 cm and used as a target source in growth of thin film. Variations in time for the milling treatment of the TiO2 powder has no effect on the phase change, but rather on the homogeneity of grain size on a thin layer of TiO2. In this study, the optimum milling time to produce a homogeneous grain size of a thin layer of TiO2 for 3 hours.
引用
收藏
页码：6582 / 6584
页数：3
相关论文
共 50 条
  • [1] Pulsed laser deposition of anatase and rutile TiO2 thin films
    Murugesan, S.
    Kuppusami, P.
    Parvathavarthini, N.
    Mohandas, E.
    SURFACE & COATINGS TECHNOLOGY, 2007, 201 (18): : 7713 - 7719
  • [2] Epitaxial growth of TiO2 thin films by pulsed laser deposition on GaAs(100) substrates
    Liu, XH
    Chen, XY
    Yin, J
    Liu, ZG
    Liu, JM
    Yin, XB
    Chen, GX
    Wang, M
    JOURNAL OF VACUUM SCIENCE & TECHNOLOGY A-VACUUM SURFACES AND FILMS, 2001, 19 (02): : 391 - 393
  • [3] Characterization of doped TiO2 thin films obtained by pulsed laser deposition
    Dobromir, M.
    Manole, A. -V.
    Ursu, L.
    Ursu, C.
    Neagu, M.
    Luca, D.
    OPTOELECTRONICS AND ADVANCED MATERIALS-RAPID COMMUNICATIONS, 2013, 7 (5-6): : 397 - 401
  • [4] Structural characterization of TiO2 thin films obtained by pulsed laser deposition
    Escobar-Alarcón, L
    Haro-Poniatowski, E
    Camacho-López, MA
    Fernandez-Guasti, M
    Jímenez-Jarquín, J
    Sánchez-Pineda, A
    APPLIED SURFACE SCIENCE, 1999, 137 (1-4) : 38 - 44
  • [5] Preparation of TiO2 thin films by pulsed laser deposition for waveguiding applications
    Garapon, C
    Champeaux, C
    Mugnier, J
    Panczer, G
    Marchet, P
    Catherinot, A
    Jacquier, B
    APPLIED SURFACE SCIENCE, 1996, 96-8 : 836 - 841
  • [6] Influence of dopants on TiO2 thin films properties grown by pulsed laser deposition
    Sima, C.
    OPTOELECTRONICS AND ADVANCED MATERIALS-RAPID COMMUNICATIONS, 2012, 6 (1-2): : 136 - 140
  • [7] Preparation of transparent conductive TiO2:Nb thin films by pulsed laser deposition
    Tonooka, K.
    Chiu, Te-Wei
    Kikuchi, N.
    APPLIED SURFACE SCIENCE, 2009, 255 (24) : 9695 - 9698
  • [8] Pulsed laser deposition of thin films of TiO2 for Li-ion batteries
    Curcio, Mariangela
    De Bonis, Angela
    Brutti, Sergio
    Santagata, Antonio
    Teghil, Roberto
    APPLIED SURFACE SCIENCE ADVANCES, 2021, 4
  • [9] Combined magnetron sputtering and pulsed laser deposition of TiO2 and BFCO thin films
    D. Benetti
    R. Nouar
    R. Nechache
    H. Pepin
    A. Sarkissian
    F. Rosei
    J. M. MacLeod
    Scientific Reports, 7
  • [10] Combined magnetron sputtering and pulsed laser deposition of TiO2 and BFCO thin films
    Benetti, D.
    Nouar, R.
    Nechache, R.
    Pepin, H.
    Sarkissian, A.
    Rosei, F.
    MacLeod, J. M.
    SCIENTIFIC REPORTS, 2017, 7
12345