The abrasive wear properties of Al-Mg-Si3N4 metal matrix composites

被引：8
|
作者：
Wang, Shou-Ren [1 ]
Geng, Hao-Ran
Wang, Ying-Zi
Sun, Bin
机构：
[1] Shandong Univ, Key Lab Liquid Struct & Hered Mat, Jinan 250014, Peoples R China
[2] Jinan Univ, Sch Mat Sci, Jinan 250022, Peoples R China
来源：
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE | 2006年 / 15卷 / 05期
基金：
中国国家自然科学基金;
关键词：
Al-Mg matrix composites; ceramic; friction and wear; infiltration; three-dimensional network structure;
D O I：
10.1361/105994906X136061
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
One kind of three-dimensional network structure, reinforced aluminum magnesium matrix composites, has been prepared by pressure-assisted and vacuum-driven infiltration technology. The composites interpenetrated with ceramic have higher wear resistance than the metal matrix owing to their special topology structure. The reinforcement volume fraction has a large effect on abrasive wear. The wear rate decreases with the increase of the volume fraction of reinforcement and increases with the increase of sliding time and applied load. The wear mechanism of the composites (abrasive wear) differs greatly from the matrix alloy (adhesive wear).
引用
收藏
页码：549 / 552
页数：4
相关论文
共 50 条
  • [21] Mechanical Properties and Abrasive Wear Behaviour of Functionally Graded Al-Si12Cu/Al2O3 Metal Matrix Composite
    Radhika, N.
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2017, 70 (01) : 145 - 157
  • [22] Mechanical Properties and Abrasive Wear Behaviour of Functionally Graded Al-Si12Cu/Al2O3 Metal Matrix Composite
    N. Radhika
    Transactions of the Indian Institute of Metals, 2017, 70 : 145 - 157
  • [23] Interpenetrating Microstructure and Properties of Si3N4/Al–Mg Composites Fabricated by Pressureless Infiltration
    Wang Shouren
    Geng Haoran
    Zhang Jingchun
    Wang Yingzi
    Applied Composite Materials, 2006, 13 : 115 - 126
  • [24] The improved mechanical properties of Al matrix composites reinforced with oriented β-Si3N4 whisker
    Chenxu Zhang
    Yu-Ping Zeng
    Dongxu Yao
    Jinwei Yin
    Kaihui Zuo
    Yongfeng Xia
    Hanqin Liang
    JournalofMaterialsScience&Technology, 2019, 35 (07) : 1345 - 1353
  • [25] The improved mechanical properties of Al matrix composites reinforced with oriented β-Si3N4 whisker
    Zhang, Chenxu
    Zeng, Yu-Ping
    Yao, Dongxu
    Yin, Jinwei
    Zuo, Kaihui
    Xia, Yongfeng
    Liang, Hanqin
    JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 2019, 35 (07) : 1345 - 1353
  • [26] Study on microstructure and abrasive wear behavior of sintered Al matrix composites
    Mazahery, Ali
    Shabani, Mohsen Ostad
    CERAMICS INTERNATIONAL, 2012, 38 (05) : 4263 - 4269
  • [27] Mechanical and wear properties of Si3N4 reinforced titanium composites
    Mutuk, Tugba
    Gurbuz, Mevlut
    INDIAN JOURNAL OF ENGINEERING AND MATERIALS SCIENCES, 2020, 27 (05) : 1027 - 1036
  • [28] Two Body Abrasive Wear of Al-Mg-Si Hybrid Composites: Effect of Load and Sliding Distance
    Nallan Chakravartula, Kaushik
    Rajamalla, Narasimha Rao
    MATERIALS SCIENCE-MEDZIAGOTYRA, 2016, 22 (04): : 491 - 494
  • [29] Si3N4 reinforced Al-Si-Mg matrix composites: Powder metallurgy fabrication, PEO coating and characterization
    Yurekturk, Yakup
    Senyurt, Berk
    Celtik, Cansu
    Kucukelyas, Burak
    Akcamli, Nazli
    APPLIED SURFACE SCIENCE, 2025, 690
  • [30] The microstructure and mechanical properties of Al-Si-B4C metal matrix composites
    A. R. Kennedy
    Journal of Materials Science, 2002, 37 : 317 - 323
12345